Summary of the content on the page No. 1
Summary of the content on the page No. 2
Summary of the content on the page No. 3
CONTENTS Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s Ejecting a Disc ........................................................................................................... 16 Reset the Loading Mechanism................................................................................... 16 manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to Controlling Playback .................................
Summary of the content on the page No. 4
CONTENIDO Gracias por elegir los productos Jensen. Esperamos que encuentre en este manual Eyectar un Disco ........................................................................................................ 44 Reinicie el Mecanismo de Carga ............................................................................... 44 instrucciones claras y fáciles de seguir. Si se toma unos pocos minutos para leerlo, aprenderá Controlando la Reproducción................................................
Summary of the content on the page No. 5
TABLE DES MATIÈRES Merci d'avoir choisi un produit Jensen . Nous espérons que vous allez trouver les instructions Insérer un disque ....................................................................................................... 72 Ejection d'un disque ................................................................................................... 72 dans ce guide de propriétaire claires et faciles à suivre . Prenez quelques minutes à le Réinitialiser le mécanisme de chargement ......
Summary of the content on the page No. 6
iv
Summary of the content on the page No. 7
VM9311 PREPARATION Congratulations on your purchase of the Jensen VM9311 Chassis Mobile Multimedia Receiver. • 7-inch TFT active-matrix LCD, 336, 960 pixels (1440W X WARNING! Only connect the unit to a12-volt power supply with proper grounding. 234H) It’s a good idea to read all of the instructions before beginning • Full automatic motorized TFT LCD flip-out and up the installation. We recommend having your Jensen VM9311 • 16-step TFT LCD tilt adjustment installed by a reputable installation
Summary of the content on the page No. 8
VM9311 Disconnecting the Battery To prevent a short circuit, be sure to turn off the ignition and remove the negative (-) battery cable prior to installation. NOTE: If the VM9311 is to be installed in a car equipped with an on-board drive or navigation computer, do not disconnect the battery cable. If the cable is disconnected, the computer memory may be lost. Under these conditions, use extra caution during installation to avoid causing a short circuit. 2
Summary of the content on the page No. 9
VM9311 WIRING DIAGRAM 3
Summary of the content on the page No. 10
VM9311 WIRING DIAGRAM - MULTIMEDIA CONNECTIONS *TERK XMDJEN100 cables (sold separately) **TERK XMD1000 Direct Tuner and antenna (sold separately) 4
Summary of the content on the page No. 11
Pus Pus A TFT T T 7-INCH DIGITAL TFT AM/FM/DVD/MP3 RECEIVER OPEN 7-INCH 7-INCH BAND TF TFT T AS/PS DISP VM9510 AV AUX IN h h MUTE ENTER PWR MODE 7-INCH DIGIT L AM/FM/DVD/MP3 RECEIVER OPEN 7-INCH 7-INCH TF TF BAND AS/PS DISP VM9510 AV AUX IN Push Push MUTE ENTER PWR MODE VM9311 INSTALLATION 5. Replace any items you removed from the dashboard. Pre-installation CAUTION! Be careful not to damage the car wiring. 1. Press the metal levers on both sides to remove the half- sleeve from the radio. FINAL
Summary of the content on the page No. 12
VM9311 CONTROLS AND INDICATORS Button Operation 1. OPEN Press the OPEN button (1) to activate the automatic mechanical system and move the TFT monitor into viewing position. Press again to close the TFT. 2. WIDE/PICTURE Press the WIDE/PICTURE button (2) to adjust the display aspect of the picture to one of three settings: Cinema, Full or Normal. Press and hold to access picture settings. 3. ( ) Press the button (3) to adjust the upward tilt angle of the screen one step at a time. Press an
Summary of the content on the page No. 13
VM9311 CONTROLS AND INDICATORS 10. 3/SCN DVD Mode: Press once to start scan playback. TUNER Mode: Press once to play preset radio station channel 3. Press and hold to store the current radio station in preset channel 3. 11. 4/REP DVD Mode: Press once to start repeat playback. TUNER Mode: Press once to play preset radio station channel 4. Press and hold to store the current radio station in preset channel 4. 12. 5/RDM DVD Mode: Press once for random playback. TUNER Mode: Press once to play pr
Summary of the content on the page No. 14
VM9311 CONTROLS AND INDICATORS LCD Display/Indicators 1. Disc Indicator Illuminated when disc is loaded 2. DVD Playback Indicators (SCN/RPT/RDM/ALL) The following DVD playback indicators become Illuminated when the corresponding function is active: • SCN: scan playback • RPT: repeat playback 1 2 3 4 5 6 • RDM: random playback • ALL: playback all chapters 3. Loudness Indicator (LOUD) The loudness indicator becomes illuminated when the LOUD function is activated. 4. Main Display The main di
Summary of the content on the page No. 15
VM9311 REMOTE CONTROL Table 1: Remote Control Functions Button Function Name/Ref # DVD VCD AM/FM CD/MP3 XM iPod MENU 1 Enters the main Turns on PBC Displays XM Selects Photo menu of the disc when playing VCD Setup Menu mode TITLE 2 Enters the title Plays first ten sec- Selects Music menu of the disc onds of each mode chapter/title MUTE 3 Toggles on/off Toggles on/off Toggles on/off Toggles on/off Toggles on/off Toggles on/off audio output audio output audio output audio output audio output au
Summary of the content on the page No. 16
VM9311 Table 1: Remote Control Functions Button Function Name/Ref # DVD VCD AM/FM CD/MP3 XM iPod 19 Selects the next Selects the next Searches an Selects the next Searches an Selects the next chapter for play- chapter for play- available radio track for playback available radio track for playback back back station by increas- station by increas- ing tuning fre- ing tuning fre- quency quency BAND 20 Stops playback Stops playback Selects FM/AM Stops playback Selects XM, XM1, band XM2, or XM3 ba
Summary of the content on the page No. 17
VM9311 USING THE TFT MONITOR c. Video should be displayed on the TFT monitor within 1 Open/Close TFT Monitor Image Setting ~ 2 seconds. Press the OPEN button (1) on the front panel or press the Table 2 shows the video output mode for each playing • Parking break is disengaged (off) when the vehicle is ( ) button (25) of the front zone remote control to activate source. started or the accessory/ignition is turned on. To activate the mechanism that moves the display panel into the viewing v
Summary of the content on the page No. 18
VM9311 OPERATING INSTRUCTIONS the screen. The unit will beep two times to confirm your turn- Power On / Off on volume setting. NOTE: The Bass and Treble levels are only adjustable Press the /MUTE button (1) to turn the unit on. The buttons when EQ is set to “User” mode. on the front of the unit light up and “WELCOME” appears Audio Control Menu briefly in the LCD panel (17), followed by the current mode The Audio Control feature allows you to easily adjust your Loudness status. If the TFT sc
Summary of the content on the page No. 19
VM9311 SYSTEM SETUP MENU In “System Setup” mode, “ASP CONFIG” and “GENERAL Adjusting a Feature Table 5: General Setup Menu Features SETUP” are available for adjustment. Setup can be 1. Enter the option field for the feature you want to adjust performed by pressing the dedicated button on the remote by pressing the >/|| button (18) on the remote or by Setting Options Function control or on the front panel. For system settings, press the pressing the ENTER (joystick) button (20) on the unit. A C
Summary of the content on the page No. 20
VM9311 Adjusting the Clock Table 6: ASP Config Menu Features Method 1 – TFT screen open: Setting Options Function 1. Access the “Clock” setting under the General Setup menu. Sub Filter 80Hz Selecting a crossover frequency sets a cut-off frequency of the subwoofer's 2. Press the >> or << buttons (14, 22) on the remote 120Hz LPF (low-pass filter) and the control or the /\ or V buttons (18, 19) on the joystick to “SMALL” speakers' HPF (high-pass 160Hz filter). The Crossover frequency set- m
