Summary of the content on the page No. 1
VM9215BT
Operating Instructions
watts peak
40W x 4
160
Summary of the content on the page No. 2
VM9215BT Thank you for choosing a Jensen product. We hope you will fi nd the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen VM9215BT Mobile Multimedia Receiver for maximum enjoyment. CONTENTS Features ............................................................................................................... 3 Controls and Indicators .....................................
Summary of the content on the page No. 3
VM9215BT FEATURES Congratulations on your purchase of the Jensen VM9215BT Mobile Multimedia Receiver. It’s a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen VM9215BT installed by a reputable installation shop. DVD • Aspect Ratio - Full and Normal • Fast Forward - 2X, 4X, 8X, and 20X • Slow Motion - 2X, 4X, 8X, and 20X • Play, Pause, Stop, Next Chapter, and Previous Chapter CD / MP3 / WMA • CD-Text Compatible • ID3 Tag Compatible • D
Summary of the content on the page No. 4
VM9215BT SiriusXM® Ready • Satellite Channel Name, Artist, Song, and Categories Displayed on Monitor Chassis • 1.0 DIN (Import / ISO-DIN Mountable) • Motorized Flip-Out / Flip-Up LCD Screen • 8 Character / Segment Type Secondary LCD Display • 7” TFT Active Matrix LCD • 336, 960 Sub Pixels (1440W X 234H) • Screen Tilt / Angle Adjustment • Beep Tone Confi rmation (ON-OFF Option) • Heat Management System - Forced Air-Cooling To Keep The Chip-Sets Operating at Nominal Temperatures General • Navigat
Summary of the content on the page No. 5
VM9215BT Optional Equipment • NAV104 The VM9215BT is “navigation ready.” Before accessing any navigation features, you must purchase and install the navigation module (NAV104). All installation and operating instructions will be included with the navigation module. Once the navigation module is connected and operating properly, the NAV source mode will become active. While the navigation module is not installed, the NAV option appears gray, indicating the function is not available. • Bluetoo
Summary of the content on the page No. 6
VM9215BT CONTROLS AND INDICATORS OPEN BAND 2 45 1 3 CLOSE PIC NAV / WIDE TILT DISP VM9215BT DISP M U T A/V E SRC INPUT 15 14 13 12 11 10 9 8 7 6 6
Summary of the content on the page No. 7
VM9215BT 1. CLOSE/OPEN Press to activate the automatic mechanical system and move the TFT monitor into the viewing position. Press again to close the TFT. 2. PIC/BAND With the monitor open, press PIC to adjust the Brightness and Contrast (see “Image/Display Settings”). With the monitor closed, press BAND to change between three FM and two AM bands. 3. TFT Display 4. WIDE/ With the monitor open, press WIDE to adjust the display aspect of the picture to one of two settings: Full or STANDB
Summary of the content on the page No. 8
VM9215BT REMOTE CONTROL See Table 1 for remote control functions. 8 3 35 4 TO iPod 9 5 MUSIC PHOTO VIDEO 16 13 23 1 15 2 30 14 31 28 17 18 11 19 32 22 12 24 21 10 25 20 27 26 29 6 34 33 7 8
Summary of the content on the page No. 9
VM9215BT Table 1: Remote Control Functions Button Function Name # DVD VCD TUNER CD/MP3/ iPod USB MENU 1 Enters Turns on/off Selects the main PBC when Photo menu of playing mode. the disc. VCD. TITLE 2 Enters the Plays the Selects title menu fi rst ten Music of the disc. seconds mode. of each chapter/ title. MUTE 3 Toggles Toggles on/ Toggles on/ Toggles Toggles on/off off audio off audio on/off on/off audio output. output. audio audio output. output. output. POWER 4 Turns the Turns
Summary of the content on the page No. 10
VM9215BT Table 1: Remote Control Functions Button Function Name # DVD VCD TUNER CD/MP3/ iPod USB PHOTO/ 9 Language Selects SUBTITLE selection Photo for subtitle. mode. DISP/ 10 Displays Displays Displays Display Displays CLEAR playing playing playing playing playing information. information. information. information. information. Delete entry Delete entry Delete entry Delete entry Delete entry or move or move or move or move or move backwards backwards backwards backwards backwards to c
Summary of the content on the page No. 11
VM9215BT Table 1: Remote Control Functions Button Function Name # DVD VCD TUNER CD/MP3/ iPod USB VOL + 16 Increases Increases Increases Increases Increases volume. volume. volume. volume. volume. 17 Selects Selects the Searches for Selects Pauses the previous an available the playback/ previous chapter for radio previous starts chapter playback. station by track for playback. for decreasing playback. playback. tuning frequency. 18 Pauses Pauses Pauses playback/ playback/ playback/ starts st
Summary of the content on the page No. 12
VM9215BT Table 1: Remote Control Functions Button Function Name # DVD VCD TUNER CD/MP3/ iPod USB PIC 24 Displays Displays set-up set-up parameters. parameters. OPEN/ 25 Opens/ Opens/ Opens/ Opens/ Opens/ CLOSE closes closes closes closes Closes the TFT the TFT the TFT the TFT the TFT ( ) monitor. monitor. monitor. monitor. monitor. TILT 26 Decreases Decreases Decreases Decreases Decreases monitor tilt monitor tilt monitor monitor monitor angle. angle. tilt angle. tilt angle. tilt angle. T
Summary of the content on the page No. 13
VM9215BT Table 1: Remote Control Functions Button Function Name # DVD VCD TUNER CD/MP3/ iPod USB SETUP 31 Displays Displays Displays Displays Displays Setup Setup Setup Setup Setup menu. menu. menu. menu. menu. EQ 32 Accesses Accesses Accesses Accesses Accesses equalizer equalizer equalizer equalizer equalizer menu. menu. menu. menu. menu. RDM 33 Plays all Plays all Plays all / # chapters tracks in tracks in in random random random order. order. order INT 34 Plays the / * fi rst ten sec
Summary of the content on the page No. 14
VM9215BT USING THE TFT MONITOR Opening/Closing the TFT Monitor Open TFT Monitor Press the OPEN button on the front panel or press the button on the remote control to activate the mechanism that moves the display panel into the viewing position. Close TFT Monitor Press the OPEN button on the front panel or press the button on the remote control to load the display panel back into the compartment. TFT Monitor Auto Open • If “TFT Auto Open” is “on” when the unit is turned on, the monitor autom
Summary of the content on the page No. 15
VM9215BT Monitor Movement Mechanism If an obstruction occurs in the monitor path, the following protective measures can be executed to prevent damage to the mechanism or monitor: Table 2: Monitor Protective Measures Obstruction Self Protection OPEN Button Power Pressed Reconnected Monitor loading Monitor is Monitor fully Monitor is out horizontally automatically extended automatically loaded into unit horizontally loaded into unit Monitor loading in Unit stops at Monitor fully Monitor is ho
Summary of the content on the page No. 16
VM9215BT OPERATING INSTRUCTIONS Power On / Off Press the /SRC button on the front panel or press the POWER/ button on the remote control to turn the unit on. You can also turn on the unit by pressing the OPEN button and opening the TFT screen. Press and hold the /SRC button on the front panel or press the POWER/ button on the remote control to power off the unit. The monitor is drawn back into the main compartment. Audible Beep Confi rmation An audible beep tone confi rms each functi
Summary of the content on the page No. 17
VM9215BT Source Menu You can also use the touch screen to change the source through the SOURCE MENU page. To access the SOURCE MENU, touch the top left corner of the screen or press the SRC button on the front panel. Source Menu Page 1 Source Menu Page 2 The SOURCE MENU consists of two pages. Touch the Next or Previous icons to go from one page to another. Touch the DISC, RADIO, USB, USB2, SIRIUSXM, BT (Bluetooth), NAV, AUX IN, CAMERA or SETTINGS icons to select the corresponding source. N
Summary of the content on the page No. 18
VM9215BT External Devices External peripheral devices, including a game console, camcorder, navigation unit, iPod, Zune, etc. can be connected to this unit via RCA output using an A/V Media Adapter Cable (not included). A/V INPUT 1 Right Audio 2 Left Audio 3 Ground 4 Video 3.5mm A/V Cable (not included) Connect the external device to the A/V Media Adapter Cable and then plug the cable into the A/V INPUT connector on the front of the radio. Select “AUX IN1” on the SOURCE MENU to acces
Summary of the content on the page No. 19
VM9215BT Audio Control Menu The Audio Control feature allows you to easily adjust your audio system to meet the acoustical characteristics of your vehicle, which vary depending on the type of vehicle and its measurements. Proper setting of the Fader and Balance boosts the eff ects of the cabin equalizer. Equalizer Touch the EQ icon on the right side of the touch screen to display the equalizer screen or press the EQ button on the remote control. • Use the touch screen +/- icons to adjust th
Summary of the content on the page No. 20
VM9215BT Table 3. Equalizer Adjustments Setting Adjustable Function Range BASS -14 to +14 Reduces or increases the bass frequency sound level. Touch the + or - buttons to adjust the settings. MID -14 to +14 Reduces or increases the mid-range frequency sound level. Touch the + or - buttons to adjust the settings. TREBLE -14 to +14 Reduces or increases the high frequency sound levels. Touch the + or - buttons to adjust the settings. LCF 60 Hz Selects the low pass fi lter center frequency.
