Summary of the content on the page No. 1
Volume
1
Instruction Manual
EDR810H/EDR810M
EDR810H/EDR810M
EDR410H/EDR410M
EDR410H/EDR410M
Summary of the content on the page No. 2
E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N EDR 810H/810M/410H/410M Instruction Guide 2005 EverFocus Electronics Corp www.everfocus.com All rights reserved. No part of the contents of this manual may be reproduced or transmitted in any form or by any means without written permission of the Everfocus Electronics Corporation. Release Date: April 2009 QuickTime is a registered trademark of the Apple Computer, Inc. Windows is a registered trademark of the Microsoft Corporation. Li
Summary of the content on the page No. 3
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communicatio
Summary of the content on the page No. 4
Summary of the content on the page No. 5
TABLE OF CONTENTS 1. PRODUCT OVERVIEW....................................................................................................... 12 1.1 FEATURES ............................................................................................................................ 12 1.2 SPECIFICATIONS ................................................................................................................... 13 1.3 FRONT PANEL KEYPADS......................................................
Summary of the content on the page No. 6
4.2 SCHEDULE RECORDING SETUP............................................................................................. 80 4.3 EVENT RECORDING SETUP................................................................................................... 81 5. PLAYBACK OVERVIEW..................................................................................................... 84 5.1 BASIC PLAYBACK .......................................................................................................
Summary of the content on the page No. 7
APPENDIX A: REMOTE CONTROL .................................................................................. 147 APPENDIX B: ALARM BOARD CONFIGURATION........................................................ 148 TROUBLESHOOTING........................................................................................................... 150
Summary of the content on the page No. 8
Safety Warning WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Press the STOP key to stop playing back. CAUTION DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to op
Summary of the content on the page No. 9
Safety Precautions Refer all work related to the installation of this product to qualified service personnel or system installers. Do not block the ventilation opening or slots on the cover. Do not drop metallic parts through slots. This could permanently damage the appliance. Turn the power off immediately and contact qualified service personnel for service. Do not attempt to disassemble the appliance. To prevent electric shock, do not remove screws or covers. There are no user-serviceable
Summary of the content on the page No. 10
Safety Precautions Read Instruction All the safety and operating instructions should be read before the unit is operated. Retain Instructions The safety and operating instructions should be retained for future reference. Heed Warnings All warnings on the unit and in the operating instructions should be adhered to. Follow Instructions All operating and use instructions should be followed. Cleaning Unplug the unit from the outlet before cleaning. Do not use liquid cleaners or aerosol cleaners
Summary of the content on the page No. 11
Chapter 1 1. Product Overview EDR810/410 DVRs are the industry’s first full-featured digital video recorder designed specifically for use within the security industry. EDR810/410 DVRs incorporates all the benefits of digital video recording, is simple to install, and operates just like a VCR. Highly efficient compression technology and superior resolution of recorded images make the Digital Video Recorder stand out from the competition as the best choice for security surveillance. 1 1..1 1 F Fe
Summary of the content on the page No. 12
1.2 Specifications 1.2 Specifications Video format NTSC or PAL Video input 4/8 camera inputs (B NC), 1Vp-p/75ohm 1 BNC video out (1 Vp-p/75ohm) f or Main Monitor Video output 1 BNC video out (1 Vp-p/75ohm) f or Call Monitor 4 BNC outputs (1 Vp-p/75ohm) f or Looping (4 Channels only) Video compression MPEG4 720x240, 720x480 or 360x240 for NTSC Recording resolution 720x288, 720x576 or 360x288 for PAL Full, 4, 7, and 9 screen view for Live and Playback Video display PIP and 2x2 Zoom for Pla
Summary of the content on the page No. 13
1.3 Front Panel Keypads 1.3 Front Panel Keypads Keys: 1 8 ~ Channel Key: Press FULL+Channel Key (CH1~CH8) to display video image in the full screen format; the picture of the corresponding channel will fill the whole screen. 1 CH1 / REC: Press this key to start instant recording. 2 CH2 / REV. PLAY: Reverse Play Back. 3 CH3 / STOP: Press this key to stop recording and playing back. 4 CH4 / PLAY: Play Back. 5 CH5 / PAUSE: Press this key to pause the playback picture. 6 CH6 / SEARCH: Press
Summary of the content on the page No. 14
9 FULL: Press this key and channel Key at the same time to switch to full screen in both live mode and play back mode. Press “MODE” to exit full screen. 10 MODE: Switch PIP (Live only), 4, 7 and 9 displays in Live and Playback modes. 11 ZOOM: In full screen mode, 2x electronic zoom. Zoom screen can be moved through JOG. ENTER key changes the direction. Press the zoom key again to switch the electronic zoom off. In multiscreen mode: Screen adjustment. Use the JOG to adjust the image to the fit
Summary of the content on the page No. 15
16 MENU: Press this key to enter or exit MAIN SETUP MENU or to exit from any submenu. 17 HDD Lock: Keeps HDD in place and turns on HDD power. 18 Hard Disk Tray: Hard Disk holder for HDD. 19 Shuttle and Jog Dial Shuttle: In the Playback mode, turn the Shuttle dial to fast forward/rewind the video. In the Pause mode, turn the Shuttle dial to slow forward/rewind the video. In the event list, turn the Shuttle to change pages. Jog Dial: In the Menu mode, turn the Jog dial to change settings and v
Summary of the content on the page No. 16
1.4 Back Panel Connections 1.4 Back Panel Connections Back panel of 810H Back panel of 810M Back panel of 410H Back panel of 410M
Summary of the content on the page No. 17
POWER 1 Main Power plug: Connect the DC 12~ 24V power source to adapter for AC 100~ 240V. 2 Audio IN: Audio input for recording, and it can be set to “YES” or “NO” in the RECORD SETUP MENU. Audio OUT: Connect an audio output to a monitor or other device. MONITOR 3 MAIN MONITOR: This connector is used for the main monitor display, a number of different display modes may be selected for viewing. 4 CALL MONITOR: This connector is used for the call monitor. This monitor can only display a full s
Summary of the content on the page No. 18
LAN 7 LAN Connector: RJ-45 network connection. RS232 8 RS232 connector: D-Sub 9-pin connector to RS232 ports for testing purpose ONLY. RS485 9 RS485 connector: RJ 45 Connector to cascade/control multi Digital Video Recorders. Remote 10 Remote Control: Remote control port allows for an extension wire with an IR receiver instead of the IR receiver on the front panel. Note: The IR receiver extension line (1 0m) mu st be purchased separately. Wireless LAN 11 Antenna: Integrated IEEE 802.11b/g
Summary of the content on the page No. 19
1.5 Monitor Display 1.5 Monitor Display The status information of the cameras or machine will show up, and be located at different places on the screen. 1. Channel tag 2. Event sign 3. Select sign 4. Play status bar 5. Record status bar For mobile model only: 6. GPS orientation
Summary of the content on the page No. 20
1 Channel tag: A channel tag indicates the channel name of the screen. 2 Event sign: Event signals which are small icons with a capital letter and red background show the events on each screen. There are a total of 6 different signals: Alarm event. A Alarm event shows on a channel if an ALARM is enabled for that camera in the ALARM SETUP MENU and an alarm is triggered. Motion event. M Motion event only shows up when the camera’s MOTION is enabled in MOTION SETUP MENU and the camera detects
