Summary of the content on the page No. 1
XDMA6855
INSTALLATION/OWNER'S MANUAL
® ®
AM/FM/CD/MP3/WMA/iPod /Bluetooth Ready Receiver with Motorized Detach Face
Summary of the content on the page No. 2
XDMA6855 INSTALLATION Preparation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration. Getting Started • Remove trim ring from unit, • Remove transit screws located on top of the unit. • Insert the supplied keys i
Summary of the content on the page No. 3
XDMA6855 INSTALLATION Wiring Diagram BLACK 8-pin Female Mini-DIN Yellow BTM60 Connection (sold separately) Auxiliary Input WHITE 10-pin Female Mini-DIN IPC2M Connection (sold separately) Antenna Connector BLACK Front Preamp Output FUSE When replacing the fuse, make sure new fuse is the correct type and amperage. Using an incorrect fuse could damage the radio. The XDMA6855 uses one 10 amp ATM fuse located beside the wiring connector. 3
Summary of the content on the page No. 4
XDMA6855 OPERATION Control Locations - Receiver 1 2 3 5 6 4 20 19 18 17 16 15 14 13 12 11 10 9 8 7 Tune/Track Down Tuner Scan/Key 8 1 11 Power/Eject Preset 3/Intro/Key 3 2 12 Volume/Audio/Setup Return/Key 7 3 13 AS/PS/Enter/Key # Preset /Random/Key 4 14 Tune/Track Up Preset 6/Menu/Key 6 5 15 Infrared Sensor Preset 1/Repeat/Key 1 6 16 Display/Key 0 7 17 Mode/Search Preset 5/Folder Up/Key 5 8 18 Mute/End Call 9 EQ/Key 9 19 Talk/Redial 10 Preset /Folder Down/Key 20 Band/Play/Pause/Key *
Summary of the content on the page No. 5
XDMA6855 OPERATION Control Locations - Remote 1 2 3 19 4 18 5 17 6 7 16 8 15 9 14 10 11 13 12 Power Open 1 11 Volume Up Mute/End Call 2 12 AS/PS/Enter/Key # Talk/Redial 3 13 Audio/Setup Preset 5/Folder Up/Key 5 4 14 Tune/Track Up Preset /Folder Down/Key 5 15 Display Preset 1/Repeat /Key 1 6 16 17 7 Volume Down Mode/Search 18 8 Preset 3/Intro/Key 3 Tune/Track Down 9 Preset /Random/Key 19 Band/Play/Pause/Key * 10 Preset 6/Menu/Key 6 5
Summary of the content on the page No. 6
XDMA6855 OPERATION General Operation Front Panel Note: The front panel is semi-permanently attached during assembly. Please refer to the separate yellow instructions (before installation) to make the front panel removable. With the unit off, press EJECT to allow the front panel to slide Front Panel Removal down. Gently squeeze the release tab located on the bottom center underside and pull front panel down and away from unit to remove. To install, insert left side
Summary of the content on the page No. 7
XDMA6855 OPERATION General Operation - Setup Menu 12/24-hour Clock The clock will display 1-hour AM/PM time in USA frequency : spacing mode (PM 10 00). In European frequency spacing mode, the clock will display -hour time (:00). Setup Menu Press and hold the rotary encoder for more than 3 seconds to access the setup menu. Press the rotary encoder momentarily to select between the menu functions and rotate the rotary encoder left/right to adjust or activate the desired f
Summary of the content on the page No. 8
XDMA6855 OPERATION General Operation Audio Press rotary encoder momentarily to select between Volume (default), Bass, Treble, Balance, & Fader. VOLUME BASS TREBLE BALANCE FADER Bass Press rotary encoder until BAS appears then rotate encoder left/right to adjust ( -6 minimum / +6 maximum). Treble Press rotary encoder until TRE appears then rotate encoder left/right to adjust ( -6 minimum / +6 maximum). Balance Press rotary encoder until BAL appears then rotate encoder left/right to adjust
Summary of the content on the page No. 9
XDMA6855 OPERATION AM/FM Tuner Operation Seek Tuning Press TUNE or TUNE momentarily to seek the nn ll next strong station. Manual Tuning Press TUNE or TUNE for more than seconds, nn ll then release. "MANUAL" will momentarily appear in the display. Press TUNE or TUNE momentarily to nn ll move radio frequency up or down one step at a time. Press and hold to advance quickly. If tuning is not adjusted for 5 seconds, the unit will return to seek tuning mode (default). "AUTO" w
Summary of the content on the page No. 10
XDMA6855 OPERATION CD Player Operation Insert CD With the label facing up, insert a standard size CD into the CD slot. The CD will automatically begin playback. Eject CD Press EJECT to eject the CD. The unit will change to previous mode of operation (AM, FM, auxiliary input, iPod, or Bluetooth). If the disc is not removed within 10 seconds, the unit will reload the disc. The unit does not have to be turned on to eject CD. Track Select Press TRACK to skip to the beginning of the next
Summary of the content on the page No. 11
XDMA6855 OPERATION CD Player Operation - MP3/WMA Files Playing an MP3/WMA Disc When an MP3/WMA encoded disc is first inserted, “READING” will appear in the display. Depending on the number of files and folders, this may take several seconds. Displaying Information Press DISP to select between track number/elapsed time (default), clock, track name, directory name, title, artist and album. “NO ID3 TAG” will be displayed if the MP3 file contains no ID3 tag information. “UNKNOWN
Summary of the content on the page No. 12
XDMA6855 OPERATION CD Player Operation - MP3/WMA Files Refer to the following button function table when selecting, searching or navigating MP3/WMA files and folders: MP3/WMA Button Function Table Button Function SRCH Direct Select, Search and Navigate Modes Enter/Confirm Preset #1 A, B, C, 1 Preset # D, E, F, Preset #3 G, H, I, 3 Preset # J, K, L, Preset #5 M, N, O, 5 Preset #6 P, Q, R, 6 Key #7 S, T, U, 7 Key #8 V, W, X, 8 Key #9 Y, Z, /, 9 Key #0 -, _, +, 0 Rotary Encoder (pu
Summary of the content on the page No. 13
XDMA6855 OPERATION CD Player Operation - MP3/WMA Files Alphanumeric File Press SRCH for more than 3 seconds, then release. or Folder Search Press SRCH again, an " " will flash in the display. * Step 1 Use the buttons in the table on page 1 (3 character maximum input) or the rotary encoder to enter the desired alphanumeric search characters. Press the rotary encoder to advance one character to the right. Step 2 Press to initiate the selected alphanumeric search. Step
Summary of the content on the page No. 14
XDMA6855 OPERATION CD Player Operation - MP3/WMA Files Navigating Note After navigating by direct select, alphanumeric search or file/folder navigate modes, the track number and elapsed time will be displayed by default. Press DISP momentarily to select clock, track name, directory name, title, artist and album. *Folder Access Press to select the previous folder. Press to select the next folder. *Folder access is only available on MP3/WMA discs recorded with more tha
Summary of the content on the page No. 15
XDMA6855 OPERATION CD Player Operation - MP3/WMA Files Media Compatibility The following types of discs/files are compatible: • CD-ROM (ISO), CD-R, CD-RW • CD-DA • MP3 data • WMA data The following types of discs/files are not compatible: • WMA files that are protected by DRM (Digital Rights Management). • WMA lossless format • Discs recorded with Track At Once or packet writing • MP3 PRO format • MP3 playlists • WAV format Playback Order MP3/WMA playback sequence is based on reco
Summary of the content on the page No. 16
XDMA6855 OPERATION CD Player Operation - MP3/WMA Files Additional MP3/WMA An internal buffer provides ESP (Electronic Skip Protection) to Information virtually eliminate skipping. When playing a disc recorded with regular audio files (CD-DA or .WAV) and MP3/WMA files, the unit will play the MP3/WMA files only. Only MP3 files with filename extension (.mp3) can be played. Only WMA files with filename extension (.wma) can be played. Do not attempt to play discs which contain non-MP3/WM
Summary of the content on the page No. 17
XDMA6855 OPERATION ® iPod Operation (Optional) Connect iPod Connecting an iPod requires the IPC2M cable (sold (Not Included) separately). Once connected, press MODE until "IPOD" appears in the display. The iPod will automatically begin playback. If a song is playing on the iPod before it is connected, it will continue to play. Displaying Information Press DISP to select between elapsed time (default), track number, clock, title, artist and album. “UNKNOWN ARTIST” will be displayed
Summary of the content on the page No. 18
XDMA6855 OPERATION ® iPod Operation (Optional) Fast Forward Press and hold or to fast forward or reverse a ll nn and Reverse song. Pause Press / II to temporarily stop playback. l Press / II again to resume playback. l Intro Press INT to play the first 10 seconds of each song. Press INT again to cancel. Repeat Press RPT to continuously repeat selected song. Press RPT again to cancel. It is not possible to select songs in repeat mode. Random Pr
Summary of the content on the page No. 19
XDMA6855 OPERATION ® Bluetooth Operation (Optional) Overview Connecting a Bluetooth device requires first connecting the Dual BTM60 module (sold separately). When connected to a Dual Bluetooth Ready head unit, the BTM60 supports the HFP (hands-free profile), ADP (advanced audio distribution profile) and AVRCP (audio video remote control profile). Preparation Before you can use a mobile device with this head unit, it must be connected and authenticated - commonly referred to as "pairing
Summary of the content on the page No. 20
XDMA6855 OPERATION ® Bluetooth Operation (Optional) Description Function Press TALK once. An "_" will appear on the display. Input the desired phone number using the 0-9, *, # buttons on the Making a Phone Call head unit front panel. Press TALK to begin dialing. A phone call may also be placed from your mobile device using the keypad, phone book or speed dial. To enter last number dialing mode, press TALK, then press TALK a second time. The head unit will display "Last Number Dialing."
