Summary of the content on the page No. 1
OPERATING INSTRUCTIONS
MANUAL DE INSTRUCCIONES
CDC-X427 YUC
MODE D’EMPLOI
STEREO CAR CD RECEIVER
RADIO-TOCADISCOS DE CD ESTEREOFONICO PARA
AUTOMOVIL
ENGLISH
ESPAÑOL
FRANÇAIS
OWNER’S RECORD
For your convenience, record the model number and
serial number (you will find them on the bottom side of
your set) in the space provided below. Please refer to
them when you contact your AIWA dealer in case of
difficulty.
Model No. CDC-X427
Serial No.
8C-KCG-901-01
011120ATM-OX
Summary of the content on the page No. 2
PRECAUTIONS TABLE OF CONTENTS • Use only in a 12-volt DC negative-ground electrical THEFT PROTECTION .............................................. 2 system. BASIC OPERATION, AUDIO AND CLOCK •Disconnect the vehicle’s negative battery terminal ADJUSTMENT ..................................................... 2 while mounting and connecting the unit. RADIO OPERATION ................................................. 3 • When replacing the fuse, be sure to use one with an CD PLAYER OPERATION ........
Summary of the content on the page No. 3
ENGLISH THEFT PROTECTION BASIC OPERATION, Take the front panel with you when leaving the car, and AUDIO AND CLOCK keep it in the supplied carrying case. ADJUSTMENT Detaching the front panel PWR/MUTE SEL Before detaching the front panel, remove the CD to AUDIO CONTROL prevent possible damage to the unit. 1 Press z to remove the CD. 2 Press and hold PWR/MUTE until the unit turns off. 3 Press %. (Hold the panel with one hand to prevent accidentally dropping it.) i/k DISP SRC 4 Remove the panel. BAN
Summary of the content on the page No. 4
Adjusting sound Setting the clock You can select the following modes for adjusting sound 1Press and hold DISP until the clock indicator depending on the music you listen to: BASS (low flashes in the display. frequencies), TRE (high frequencies), BAL (left/right), 2 Press i (to set hour) or k (to set minute), and FAD (front/ rear) and H-BASS (high bass). then turn AUDIO CONTROL. 1 Press SEL repeatedly to select the mode to be 3 Press DISP. adjusted. Pressing SEL cycles through the modes. The Dis
Summary of the content on the page No. 5
Monaural mode Presetting stations manually When signals become weak, or reception becomes (Manual Memory) poor, the unit automatically switches to Monaural mode 1 Press BAND repeatedly to select the desired band to reduce noise. (FM1, FM2, FM3, AM1, or AM2). Local mode 2 Press i or k to tune in to a desired station (see Local mode allows you to tune in only to strong stations “Tuning in to a station” as well for another tuning during Seek Tuning. method). 1 Press LO before you start seek tuning.
Summary of the content on the page No. 6
Intro Play Labeled-side up You can locate a desired track by monitoring the first 10 seconds of all the tracks on a CD. 1 Press INT during CD play. “SCAN” appears in the display. 2 Press INT again when the desired track is played. The unit returns to normal CD play. Track number One track Repeat Play You can play a track repeatedly. 1 Press REP1 during CD play. “REPEAT1” appears in the display. To cancel One track Repeat Play, press REP1 again. CD indicator Elapsed playing time Random Play You c
Summary of the content on the page No. 7
Preparations OTHER FUNCTIONS A lithium battery is installed in the remote control at the factory. Before you use the remote control, be sure to remove the insulating sheet by simply pulling it out. Remote control (back) AUDIO SRC CONTROL Changing the key illumination color You can choose blue or red as the key illumination color. 1 Press and hold SRC until “ILL” appears in the Insulating sheet display. 2 Turn AUDIO CONTROL to select 1 (for blue) or 2 Replacing the battery (for red). 1 Insert the
Summary of the content on the page No. 8
TROUBLESHOOTING SPECIFICATIONS RADIO SECTION Error code (FM) In the following cases the corresponding error code Frequency Range: 87.5 MHz – 108 MHz indication appears. Follow the suggestions below to Usable Sensitivity: 12.7 dBf solve such problems. If the error code indication does 50 dB Quieting Sensitivity: 17.2 dBf not disappear, consult an AIWA service center. IF Rejection: 100 dB Frequency Response: 30 Hz – 15,000 Hz E03 Focus error. Check that the CD is loaded properly S/N Ratio: 70 dB (
Summary of the content on the page No. 9
Printed in Indonesia
