Summary of the content on the page No. 1
Register your product and get support at:
Car Entertainment System
CEM220
EN User manual
ZH-HK
ZH-CN
Summary of the content on the page No. 2
Contents 7 Adjust system settings 18 1 Important 2 Safety 2 Select blackout setting 18 Notice 2 Turn demo mode on/off 18 Change button backlight color 18 Select start volume 18 4 2 Your car audio system Turn beep sound on/off 19 Introduction 4 Turn display scroll on/off 19 What’s in the box 4 Select shock-protect setting 19 Overview of the main unit 5 Reset 19 3 Get started 7 20 8 Additional information Install the car audio 7 Detach the front panel 20 Turn on 11 Replace fu
Summary of the content on the page No. 3
1 Important Notice Safety • Read and understand all instructions before you use your apparatus. If damage is caused by failure to follow instructions, the warranty does not apply. The making of unauthorized copies of copy- • This apparatus is designed for negative protected material, including computer ground (earth) 12 V DC operation only. programs, fi les, broadcasts and sound • To ensure safe driving, adjust the volume to recordings, may be an infringement of a safe and comfortable lev
Summary of the content on the page No. 4
Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products. The correct disposal of your old product helps prevent potentially negative consequences on the environment and human health. Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste. Please inform yourself about the local rules on separate coll
Summary of the content on the page No. 5
2 Your car audio system Congratulations on your purchase, and a b welcome to Philips! To fully benefi t from the support that Philips offers, register your product at www.philips.com/welcome. Introduction ce d With the in-car audio system, you can enjoy your drive while you listen to: • FM or AM (MW) radio • Audio from CD or MP3 disc • Audio from a USB drive fg • Audio from a SD/MMC card • Audio from external devices What’s in the box hi j Check and identify the contents of your package: a
Summary of the content on the page No. 6
Overview of the main unit a bcd e f g h i s r q ponml kj x w v u t • Enter characters for search. a • Mute or restore volume. • Select tuner band. • Select MP3/WMA folder. e MENU / DISP • Scroll up or down menu. • Display radio frequency, clock and radio program type (if available). b DBB • Display track, elapsed time, artist, • Turn on or off Dynamic Bass Boost album, title, folder, fi le and clock. (DBB) sound. • Access system menu. c SOURCE f • Select audio source. • Return to previous me
Summary of the content on the page No. 7
h • Unlock the panel i USB socket j External device socket k 6 • Select preset station no. 6 l 5 • Select preset station no. 5 m SHUF, 4 • Activate or deactivate shuffl e mode. • Select preset station no. 4 n 3, REP • Set repeat play mode. • Select preset station no. 3 o INTRO, 2 • Turn intro play on or off. • Select preset station no. 2 p 1, • Start play • Pause or resume play. • Select preset station no. 1 q / • Tune to a radio station • Skip/search for a track. r EQ/Audio • Select equalize
Summary of the content on the page No. 8
Note on the power supply lead (yellow) 3 Get started • When you connect other devices to this apparatus, ensure that the rating of the car circuit is higher than the total fuse value of all the connected devices. Caution Notes on speaker connection • Use the controls only as stated in this user manual. • Never connect speaker wires to the metal body or chassis of the car. • Never connect speaker wires with stripes Always follow the instructions in this chapter in to one another. sequence.
Summary of the content on the page No. 9
Connection: for cars with ISO 3 Connect the antenna and amplifi er as connectors illustrated, if applicable. Caution • Ensure that all loose leads are insulated with electrical tape. A1 A2 A3 A4 A5 A6 A7 A8 A B B1 B2 B3 B4 B5 B6 B7 B8 1 Pull out the ISO connectors from car dashboard and connect them to the bigger A end of the supplied standard connector. ab c d 2 Connect the other end of the supplied standard connector to the unit. Connector Connect to 1 REAR LINE OUT R Rear right speaker
Summary of the content on the page No. 10
1 Connect the antenna and amplifi er as B illustrated, if applicable. aa a A1 A2 A3 A4 A5 A6 A7 A8 b A B B1 B2 B3 B4 B5 B6 B7 B8 c d a b b b c d A e c c f g h i d d ab c d 1 Green/black strip Left speak er (Rear) 2 White/black strip Left speak er (Front) Connector Connect to 3 Gray/black strip Right speak er (Front) 1 REAR LINE OUT R Rear right speaker 4 Purple/black strip Right speak er (Rear) 2 REAR LINE OUT L Rear left speaker 3 SUB OUT Subwoofer 4 ANTENNA Antenna e RED Ignition key +12V DC
Summary of the content on the page No. 11
183 mm 4 Connect the supplied standard connector to the unit. 4 Ensure that car dashboard opening is within these measurements: Mount in the dashboard 1 If the car does not have an on-board drive or navigation computer, disconnect the negative terminal of the car battery. • If you disconnect the car battery in a car that has an on-board drive or navigation computer, the computer may lose its memory. • If the car battery is not disconnected, to avoid short-circuit, ensure that bare wir
Summary of the content on the page No. 12
Attach the front panel 5 Install the sleeve into the dashboard and bend the tabs outward to fi x the sleeve. 1 Attach the trim plate. Note • Skip this step if the unit is not fi xed by sleeve but by supplied screws. 2 Insert the right side of the panel in the 6 Place the supplied rubber cushion over the chassis until it is correctly engaged. end of the mounting bolt. 3 Press the left side of the panel and point the left hole at the left pillar. 4 Release the panel to engage the left side. Turn
Summary of the content on the page No. 13
View clock 1 Press MENU /DISP repeatedly until the clock is displayed. 12 EN
Summary of the content on the page No. 14
Store radio stations in 4 Listen to radio memory You can store up to 6 stations in each band. Tune to a radio station 1 Press SOURCE repeatedly to select Tuner. Store stations automatically 2 Press or to select band: [FM1], [FM2], 1 Press SEARCH for 3 seconds. [FM3], [AM1], or [AM2] . » The six strongest stations of the 3 Press or to tune to a radio station selected band are saved in preset manually. channels 1-6 automatically. » The radio station is broadcast. » To search for a radi
Summary of the content on the page No. 15
5 Play audio files Play from USB/SD/SDHC/ MMC device Note Note • Ensure that the disc or device contains playable fi les. • Ensure that the USB or SD/SDHC/MMC device contains playable music. Play a disc Insert the USB device 1 Open the cover marked on the front panel. Note • You cannot play CDs encoded with copyright protection technologies. You can play commercially available audio CDs and these discs: • CD-Recordables (CD-R) • CD-Re-writables (CD-RW) • MP3 CDs • WMA CDs 1 Press on the
Summary of the content on the page No. 16
Insert a card Search for an MP3/WMA track Note • This unit supports SD, SDHC, and MMC cards. 1 Press SEARCH for 3 seconds. » Search menu is displayed. » [FILE]: search by track name. 1 Press to release the panel. » [FOLDER]: search by folder sequence. 2 Insert the card into the card slot. 2 Turn to select [FILE] and then press » The unit starts playing from the card automatically. to confi rm. 3 Turn to enter a character and then press . 4 Repeat step 3 until the search term is complet
Summary of the content on the page No. 17
Shuffl e play You can play the tracks in random order. 1 During play, press SHUF, 4 to select: • [SHUF ON]: start shuffl e play for all tracks. • [SHUF OFF]: cancel shuffl e play. Repeat play 1 During play, press 3, REP repeatedly to select: • [RPT 1] (repeat one track): play the current track repeatedly. • [RPT FOLD] (repeat a folder): play all tracks in the current folder repeatedly. • [RPT ALL] (repeat all tracks): play all tracks repeatedly. Connect external sound source 1 Connect the e
Summary of the content on the page No. 18
Other sound settings 6 Adjust sound You can also edit user preset EQ. 1 Press EQ/Audio for 3 seconds. Adjust volume 2 Press or repeatedly to select the item 1 Turn clockwise/anticlockwise to to be adjusted: • [BAS] (bass) range: -7 to +7. increase/decrease volume. • [MID] (bass) range: -7 to +7. • [TRE] (treble) range: -7 to +7. • [BAL] (balance) range: 12L to 12R. (L Mute = left speaker, R = right speaker) • [FAD] (fader) range: 12R to 12F. (R = You can turn off the sound of your audio
Summary of the content on the page No. 19
Change button backlight 7 Adjust system color settings You can change button backlight color from blue to red or vice versa. 1 Press MENU /DISP for 3 seconds. Select blackout setting 2 Press or repeatedly to until [KEY You can set the screen to turn off automatically BLUE] or [KEY RED] is displayed. after the unit is idle for 10 or 20 seconds. 3 Turn to select a setting: 1 Press MENU /DISP for 3 seconds. • [KEY BLUE]: Backlight turns blue. • [KEY RED]: Backlight turns red. 2 Turn to
Summary of the content on the page No. 20
Turn beep sound on/off Select shock-protect setting Each time you press a button, the unit beeps. You can select the shock protection setting, You can turn off/on this beep sound. depending on the stability of your car and the condition of the road. 1 Press MENU /DISP for3 seconds. 1 Press MENU /DISP for 3 seconds. 2 Press or repeatedly to until [BEEP ON] or [BEEP OFF] is displayed. 2 Press or repeatedly until [ESP] is displayed. 3 Rotate to select a setting: • [BEEP ON]: Turn on th
