Summary of the content on the page No. 1
FM/MW/LW Cassette Car Stereo
3-046-400-41 (2)
FM/MW/LW
Cassette
Car Stereo
GB
Operating Instructions
CZ
Návod k obsluze
PL
Instrukcje Obsługi
TR
Kullanım kılavuzu
RU
Инструкция по эксплуатации
For installation and connections, see the supplied installation/connections
manual.
Informace o instalaci a zapojení naleznete v přiložené příručce Instalace /
zapojení.
Szczegóły dotyczące instalacji i podłączeń, proszę sprawdzić w dostarczonym,
osobnym podręczniku.
Kurma ve bağlantı işlemleri için ünite
Summary of the content on the page No. 2
Welcome ! Precautions Thank you for purchasing this Sony Cassette • If your car was parked in direct sunlight Player. This unit lets you enjoy a variety of resulting in a considerable rise in features using the following controller temperature inside the car, allow the unit to accessory: cool off before operating it. • If no power is being supplied to the unit, Supplied accessory check the connections first. If everything is in Rotary commander RM-X4S order, check the fuse. Optional accessory •
Summary of the content on the page No. 3
Cassettes longer than 90 minutes The use of cassettes longer than 90 minutes is Notes on Cassettes not recommended except for long continuous play. The tape used for these cassettes is very Cassette care thin and tends to stretch easily. Frequent • Do not touch the tape surface of a cassette, as playing and stopping of these tapes may cause any dirt or dust will contaminate the heads. them to become entangled in the cassette deck • Keep cassettes away from equipment with mechanism. built-in magn
Summary of the content on the page No. 4
Table of Contents Location of controls ................................................. 5 DSP Setting the equalizer ......................................... 24 Getting Started Selecting the listening position ....................... 25 Resetting the unit ................................................ 7 Selecting a soundstage menu — Dynamic Soundstage Organizer Detaching the front panel .................................. 7 (DSO) ............................................................. 25
Summary of the content on the page No. 5
+ T S P R R P S T - + D I C S S Location of controls OPEN PTY DSPL DSO MENU LIST TA -SEEK/AMS SOURCE AF SOUND ENTER REP SHUF MODE 1 2 3 4 56 OFF XR-C7500RX/XR-C7500R Refer to the pages listed for details. 1 MENU button qg ENTER button 9, 11, 12, 13, 15, 17, 18, 20, 21, 23, 24, 9, 11, 12, 13, 15, 17, 18, 20, 21, 22, 23, 26, 27, 31, 32, 34, 35, 36 24, 26, 27, 31, 32, 34, 35, 36 2 Volume control dial qh MODE button 10, 11, 12, 13, 19, 20, 31, 35 3 SOURCE (TUNER/TAPE/CD/MD) button During tape playba
Summary of the content on the page No. 6
Optional Card remote commander RM-X91 The corresponding buttons of the card remote commander control the same OPEN/CLOSE functions as those on this unit. OFF 1 OFF button 2 MENU button MENU DISC LIST 3 SOURCE button SEEK SEEK SOURCE 4 SEEK/AMS (cursor
Summary of the content on the page No. 7
Attaching the front panel Place the hole A of the front panel onto the spindle B on the unit as illustrated, then push Getting Started the left side in. A Resetting the unit B Before operating the unit for the first time or after replacing the car battery, you must reset the unit. Remove the front panel and press the reset button with a pointed object, such as a ballpoint pen. Reset button x Note Pressing the reset button will erase the clock setting and some memorised functions. Detaching the f
Summary of the content on the page No. 8
Turning the unit on/off How to use the menu This unit is operated by selecting items from a Turning on the unit menu. Press (SOURCE) or insert a cassette in the To select, first enter the menu mode and unit. For details on operation, refer to page 10 choose up/down (+/– of (PRST/DISC)), or (cassette player) and page 12 (radio). choose left/right (–/+ of (SEEK/AMS)). Turning off the unit (PRST/DISC) Press (OFF) to stop tape playback or FM/ MW/LW reception (the key illumination and (+) : To selec
Summary of the content on the page No. 9
2 Press (ENTER). Setting the clock The clock uses a 24-hour digital indication. Example: To set the clock to 10:08 The clock starts. 1 Press (MENU), then press either side of After the clock setting is complete, the (PRST/DISC) repeatedly until “Clock” display returns to normal playback mode. appears. Tips • You can use the convenient CT function to set the clock automatically (page 18). • When the D.Info mode is set to on, the time is always displayed (page 30). 1 Press (ENTER). The hour indic
Summary of the content on the page No. 10
Fast-winding the tape During playback, press and hold either Cassette Player side of (SEEK/AMS). Listening to a tape Rewind Fast-forward 1 Press (OPEN) and insert a cassette. Playback starts automatically. To start playback during fast-forwarding or rewinding, press (MODE) (o). Locating a specific track — Automatic Music Sensor (AMS) During playback, press either side of (SEEK/AMS) momentarily for each track you want to skip. 2 Close the front panel. You can skip up to nine tracks at one time. I
Summary of the content on the page No. 11
Playing tracks repeatedly Playing a tape in various — Repeat Play During playback, press (1) (REP) modes repeatedly until “Repeat on” in the You can play the tape in various modes: display appears. •Repeat (Repeat Play) repeats the current Repeat on y Repeat off Y DSPL track. LIST •NR (Dolby NR) lets you select the Dolby* NR B system. -SEEK/AMS •Metal lets you play a metal or CrO2 tape. ENTER •B.Skip (Blank Skip) skips blanks longer than REP SHUF MODE 1 2 3 4 56 eight seconds. •ATA (Automatic Tu
Summary of the content on the page No. 12
Memorising only the Radio desired stations You can preset up to 18 FM stations (6 each for FM1, 2, and 3), up to 6 MW stations, and up to 6 LW stations in the order of your choice. Memorising stations automatically 1 Press (SOURCE) repeatedly to select the tuner. — Best Tuning Memory (BTM) The unit selects the stations with the strongest 2 Press (MODE) repeatedly to select the signals and memorises them in the order of band. their frequencies. You can store up to 6 stations on each band (FM1, FM
Summary of the content on the page No. 13
If FM stereo reception is poor Receiving the memorised — Monaural Mode 1 During radio reception, press (MENU), stations then press either side of (PRST/DISC) repeatedly until “Mono” appears. 1 Press (SOURCE) repeatedly to select the tuner. 2 Press (+) side of (SEEK/AMS) until “Mono on“ appears. 2 Press (MODE) repeatedly to select the The sound improves, but becomes band. monaural (“ST” disappears). 3 Press the number button ((1) to (6)) on 3 Press (ENTER). which the desired station is stored. To
Summary of the content on the page No. 14
Displaying the station RDS name The name of the current station lights up in the display. Overview of the RDS Select an FM station (page 12). When you tune in an FM station that function transmits RDS data, the station name appears in the display. Radio Data System (RDS) is a broadcasting service that allows FM stations to send additional digital information along with the regular radio programme signal. Your car stereo offers you a variety of services. Here are Note just a few: retuning the sam
Summary of the content on the page No. 15
Changing the display item Retuning the same Each time you press (AF), the item changes as follows: programme automatically AF on y AF off — Alternative Frequencies (AF) Notes The Alternative Frequencies (AF) function • When “NO AF” and the station name flash alternately, it means that the unit cannot find an automatically selects and retunes the station alternative station in the network. with the strongest signal in a network. By • If the station name starts flashing after selecting using this
Summary of the content on the page No. 16
Local link function To cancel the current traffic (United Kingdom only) announcement The Local Link function lets you select other Press (TA). local stations in the area, even if they are not To cancel all traffic announcements, turn off stored on your number buttons. the function by pressing (TA) until “TA off” appears. 1 Press a number button that has a local station stored on it. Presetting the volume of traffic announcements 2 Within five seconds, press the number You can preset the volume l
Summary of the content on the page No. 17
Presetting the RDS Locating a station by stations with the AF and programme type TA data You can locate the station you want by selecting one of the programme types shown When you preset RDS stations, the unit stores below. each station’s data as well as its frequency, so you don’t have to turn on the AF or TA Programme types Display function every time you tune in the preset News News station. You can select a different setting (AF, TA, or both) for individual preset stations, or Current Affair
Summary of the content on the page No. 18
1 Press (DSPL/PTY) during FM reception until “PTY” appears. Setting the clock automatically The CT (Clock Time) data from the RDS transmission sets the clock automatically. The current programme type name appears if the station is transmitting the PTY data. 1 During radio reception, press (MENU), “- - - - -” appears if the received station is then press either side of (PRST/DISC) not an RDS station, or if the RDS data has repeatedly until “CT” appears. not been received. 2 Press either side of (
Summary of the content on the page No. 19
Basic operations of DAB DAB Searching for the Ensemble and Service — Automatic Tuning Overview of DAB 1 Press (SOURCE) repeatedly to select the tuner. DAB (Digital Audio Broadcasting) is a new multimedia broadcasting system that 2 Press (MODE) repeatedly to select transmits audio programmes with a quality “DAB.” comparable to that of CDs. This is made possible by the use of a microcomputer in the DAB tuner which uses the radio signals sent 3 Press and hold either side of (SEEK/AMS) from multipl
Summary of the content on the page No. 20
Receiving the memorised services Following procedure is available after Presetting DAB services presetting the service. For details on presetting automatically — BTM the services, refer to “Presetting DAB services automatically,” and “Presetting DAB services The BTM (Best Tuning Memory) function picks manually” (page 21). out DAB ensembles and automatically assigns the services within the ensembles to preset 1 Press (SOURCE) repeatedly to select the service numbers. The unit can preset up to 40
