Summary of the content on the page No. 1
3-856-717-11 (2)
FM/MW/LW(SW)
Compact Disc
Player
EN
Operating Instructions
F
Mode d’emploi
D
Bedienungsanleitung
For installation and connections, see the supplied Installation/Connections
manual.
En ce qui concerne l’installation et les connexions, consulter le manuel
d’installation/connexions fourni.
Zur Installation und zum Anschluß siehe die mitgelieferte Installations/
Anschlußanleitung.
CDX-C910RDS
1996 by Sony Corporation
Actual total number: Sony CDX-C910RDS (E,F,G) 3-856-717-11 (2)
Summary of the content on the page No. 2
Welcome ! Thank you for purchasing the Sony Compact Disc Player. This unit lets you enjoy a variety of features by using either a rotary remote or a wireless remote. In addition to the CD playback and the radio operations, you can expand your system by connecting an optional CD/MD changer, and digital preamplifier. EN 2 Actual total number: Sony CDX-C910RDS (E,F,G) 3-856-717-11(2)
Summary of the content on the page No. 3
Table of Contents This Unit Only With Optional Equipment Getting Started CD/MD Changer Resetting the unit ................................................ 4 Playing a CD or MD ......................................... 17 Detaching the front panel .................................. 4 Scanning the tracks Preparing the rotary remote .............................. 5 — Intro Scan ................................................. 17 Setting the clock ..................................................
Summary of the content on the page No. 4
Notes • Do not put anything on the inner surface of the front panel. • Be sure not to drop the panel when detaching it from the Getting Started unit. • If you detach the panel while the unit is still on, the power will turn off automatically to prevent the speakers from being damaged. • When you carry the front panel with you, put it in the Resetting the unit supplied front panel case. • Do not expose the front panel to direct sunlight, heat Before operating the unit for the first time or source
Summary of the content on the page No. 5
Getting Started LIST SOUND DSPL Preparing the rotary Setting the clock remote The clock has a 24-hour digital indication. When you mount the rotary remote, attach the Example: Set the clock to 10:08 label in the illustration below. 1 Press (SHIFT), then press (2) (SET UP). Set up EQ SUR Clock 1 Press (4) (n). Set up EQ SUR 1:ââ The hour digit flashes. 2 Set the hour. 005 to go back to go forward EN Set up EQ SUR 1â:ââ 3 Press (4) (n). Set up EQ SUR 1â:ââ The minute digits fl
Summary of the content on the page No. 6
Locating a specific point in a track — Manual Search CD Player During playback, press and hold either side of (SEEK/AMS). Release the button when you have found the desired point. SEEK/AMS To search forward Listening to a CD To search backward Press (OPEN) and insert the CD. Labeled side up Note ” or “ ” appears in the display, If “ that means you have reached the beginning or the end of the disc and you cannot go any further. Playing a CD in various modes The front panel closes automatically, a
Summary of the content on the page No. 7
CD Player 3 Press (4) (n) repeatedly until the Creating a programme desired programme appears. Programme Play starts. — CD Programme Memory Programme 1 playback You can play the tracks in the order you want by making your own programme. You can CD EQ SUR make two programmes: Programme 1 and PGM 1 PGM1 Programme 2. You can select up to 12 tracks in each programme. You can store the µ programmes in memory. Programme 2 playback CD 1 Press (SHIFT), then press (3) (P.MODE) EQ SUR PGM 2 PGM 2 fo
Summary of the content on the page No. 8
Adding tracks to the programme Erasing the tracks in the programme 1 Press (SHIFT), then press (3) (P.MODE) for two seconds. 1 Press (SHIFT), then press (3) (P.MODE) for two seconds. To select Programme 2, press (4) (n) repeatedly until “P 2” appears. To select Programme 2, press (4) (n) repeatedly until “P 2” appears. 2 Press (1) (N) or (4) (n) to select the track slot number where you want to 2 Press (1) (N) or (4) (n) to select the insert a track. track you want to erase. CD PGM edit CD PGM
Summary of the content on the page No. 9
CD Player/Radio Note If you try to store another station on the same number button, the previously stored station will be erased. Radio Receiving the memorised Memorising stations stations automatically — Best Tuning Memory (BTM) 1 Press (SOURCE) repeatedly to select the desired band. The unit selects the stations with the strongest signals and memorises them. You can store up 2 Press the number button ((1) to (10)) to 10 stations on each band (FM1, FM2, MW momentarily where the desired station
Summary of the content on the page No. 10
Re-tuning the same RDS programme automatically — Alternative Frequencies (AF) The Alternative Frequencies (AF) function automatically selects and re-tunes the station Overview of the RDS with the strongest signal in a network. By using this function, you can continuously function listen to the same programme during a long- Radio Data System (RDS) is a broadcasting distance drive without having to re-tune the service that allows FM stations to send station manually. additional digital information
Summary of the content on the page No. 11
RDS Listening to a regional programme Press (AF/TA) repeatedly until “TA on” or “AF TA on” appears. The “REG on” (regional on) function of this The unit starts searching for traffic unit lets you stay tuned to a regional information stations. “TP” appears in the programme without being switched to another display when the unit finds a station regional station. (Note that you must turn the broadcasting traffic announcements. AF function on.) The unit is factory preset to When the traffic announce
Summary of the content on the page No. 12
Presetting the RDS Recording the traffic stations with the AF and announcements —Traffic Information Replay (TIR) TA data You can listen to the latest traffic When you preset the RDS stations, the unit announcement by recording them. Every time stores each station’s data as well as its a traffic announcement starts, the unit frequency, so you don’t have to turn on the AF automatically records and stores up to eight or TA function every time you tune in the traffic announcements. If the recording
Summary of the content on the page No. 13
RDS 6 Press (TIR) for two seconds to return to the original display. Locating a station by t lights up. programme type You can locate the station you want by TIR AF/TA selecting one of the programme types shown below. 89 10 Note If the countries or regions where EON data is not transmitted, you can use this function only for the stations The unit turns on automatically and stands you have tuned in once. by for traffic announcements for four hours (two hours before and after the preset Programme
Summary of the content on the page No. 14
2 Press (LIST) repeatedly until the desired programme type appears. The programme types appear in the order Other Functions shown in the above table. Note that you cannot select “NONE” (Not specified) for searching. PTY EQ SUR Using the rotary remote SPORT The rotary remote works by pressing buttons and/or rotating controls. 3 Press either side of (SEEK/AMS). You can control the optional equipment with The unit starts searching for a station the rotary remote. broadcasting the selected pro
Summary of the content on the page No. 15
RDS/Other Functions If you need to mount the rotary remote on the By rotating the control while right of the steering column, you can reverse pushing (the PRESET/DISC control) the operative direction of the controls. Rotate the control while pushing it to: • Receive the stations memorised on the Press (DSPL) for two seconds while number buttons. pushing the VOL control. • Change the disc. Tip Other operations You can control the operative direction of controls with the Rotate the VOL control to
Summary of the content on the page No. 16
Changing the sound and Turning off the display display settings You can turn off the display. Even when you turn off the display, the buttons keep on You can set: illuminating. While the display is turned off, • Amber/Green to change the illumination pressing any of the buttons turns the display colour to amber or green. on for five seconds. • Beep to turn on or off the beeps. • Dimmer to change the brightness of the 1 Press (SHIFT), then press (2) (SET UP) for display. two seconds. —Select “Aut
Summary of the content on the page No. 17
Other Functions/CD/MD Changer Locating a specific track With Optional Equipment — Automatic Music Sensor (AMS) CD/MD Changer During playback, press either side of (SEEK/AMS) once for each track you want to skip. SEEK/AMS To locate succeeding tracks Playing a CD or MD To locate previous tracks Press (SOURCE) until the desired changer appears. Locating a specific point in a track CD/MD playback starts. — Manual Search Changing the displayed items During playback, press and hold either side of (SEE
Summary of the content on the page No. 18
Playing tracks repeatedly Creating a programme — Repeat Play — Programme Memory (CD/MD changer with programme memory function) You can select: • Repeat 1 to repeat a track. You can play the tracks in the order you want • Repeat 2 to repeat a disc. by making your own programme. You can • Repeat 3 to repeat all the discs in the current make two programmes: Programme 1 and changer when you connected two changers Programme 2. You can select up to 12 tracks in or more. each programme. You can store t
Summary of the content on the page No. 19
CD/MD Changer Notes To erase Programme 2, press (4) (n) • “*Wait*” appears in the display while the unit is reading repeatedly until “PGM 2” appears. the data, or when a disc has not been put into the unit. • “*Mem full*” appears in the display when you try to enter more than 12 tracks into a programme at one time. 3 Press (5) (ENTER) for two seconds. P1 PGM edit Playing the stored programme EQ SUR NO data Changing the disc order in the changer will not affect programme memory play. The entire
Summary of the content on the page No. 20
Erasing the tracks in the 2 Enter the characters. programme 1 Rotate the dial in a clockwise direction to select the desired 1 Press (SHIFT), then press (3) (P.MODE) characters. for two seconds. (A n B n C n ··· Z n 0 n 1 n 2 n ··· 9 n + n – n * n / n \ n > n < If you have labeled the disc, the bank edit n . n _ ) mode appears. Press (3) (P.MODE) to display “PGM edit” above. CD1 DISC NAME S_______ EQ SUR 4 2 1.51 DISC TRACK To select Programme 2, press (4) (n) repeatedly until “P 2” appears.
