Summary of the content on the page No. 1
4-105-632-11 (1)
FM/AM
Compact Disc Player
US
Operating Instructions
FR
Mode d’emploi
ES
Manual de instrucciones
Owner’s Record
The model and serial numbers are located on the bottom of the unit.
Record these numbers in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding this product.
Model No. Serial No.
To cancel the demonstration (DEMO) display
Summary of the content on the page No. 2
For installation and connections, see the supplied installation/connections manual. The “HD Radio Ready” logo indicates that this Warning TM product will control a Sony HD Radio tuner (sold separately). This equipment has been tested and found to TM For HD Radio tuner operation, please refer to comply with the limits for a Class B digital TM the HD Radio tuner Operating Instructions. device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable TM HD Radio and
Summary of the content on the page No. 3
Table of Contents Getting Started iPod Playable discs on this unit . . . . . . . . . . . . . . . . . 4 Playing back iPod . . . . . . . . . . . . . . . . . . . . . . 10 Resetting the unit. . . . . . . . . . . . . . . . . . . . . . . . 4 Playing tracks. . . . . . . . . . . . . . . . . . . . . . . 10 Canceling the DEMO mode . . . . . . . . . . . . . . . 4 Display items . . . . . . . . . . . . . . . . . . . . . . . 10 Preparing the card remote commander . . . . . . . 4 Setting the play mode . . . .
Summary of the content on the page No. 4
Getting Started Preparing the card remote commander Playable discs on this unit Remove the insulation film. This unit can play CD-DA (also containing CD TEXT) and CD-R/CD-RW (MP3/WMA files (page 14)). Type of discs Label on the disc CD-DA Tip For how to replace the battery, page 15. Setting the clock MP3 WMA The clock uses a 12-hour digital indication. 1 Press and hold the select button. The setup display appears. 2 Press the select button repeatedly until “CLOCK-ADJ” appears. Resetting the
Summary of the content on the page No. 5
Detaching the front panel You can detach the front panel of this unit to prevent theft. Caution alarm If you turn the ignition switch to the OFF position without detaching the front panel, the caution alarm will sound for a few seconds. The alarm will only sound if the built-in amplifier is used. 1 Press (OFF). The unit is turned off. 2 Press , then pull it off towards you. Notes � Do not drop or put excessive pressure on the front panel and display window. � Do not subject the front panel
Summary of the content on the page No. 6
SEEK SOURCE Location of controls and basic operations Main unit 12345 6 7 8 OFF AF TA TP REG DISC ALBM ARTIST TRACK SHUF ZAP + LOUD DM AUX CAT ALBM REP SHUF PAUSE SCRL EQ3 BTM 1 2 3 4 5 6 DSPL PUSH ENTER / SELECT 9q; qa qsqdqfqg qh qj qk This section contains instructions on the location Card remote commander of controls and basic operations. For details, see RM-X151 the respective pages. For iPod operation, see “iPod” on page 10, or for optional device (CD changer, etc.) operation, see ws
Summary of the content on the page No. 7
I SEEK +/– buttons The following buttons on the card remote commander have also different buttons/functions CD/iPod: from the unit. Remove the insulation film before To skip tracks (press); skip tracks use (page 4). continuously (press, then press again within about 1 second and hold); reverse/fast- ql < (.)/, (>) buttons forward a track (press and hold). To control CD/radio/iPod, the same as Radio: (SEEK) –/+ on the unit. To tune in stations automatically (press); find Setup, sound setti
Summary of the content on the page No. 8
SEEK SOURCE Searching by skip items Searching for a track — Jump mode — Quick-BrowZer When many items are in a category, you can search the desired item quickly. You can search for a track in an iPod easily by category. 1 Press (SEEK) + in Quick-BrowZer mode. (BROWSE) The following display appears. Control dial OFF A Current item number B Total item number in the current layer PUSH ENTER / SELECT Then the item name will appear. 2 Rotate the control dial to select the (BACK) desired item,
Summary of the content on the page No. 9
Radio CD For details on selecting a CD changer, see Storing and receiving stations page 13. Caution When tuning in stations while driving, use Best Display items Tuning Memory (BTM) to prevent an accident. Storing automatically — BTM 1 Press (SOURCE) repeatedly until “TUNER” appears. A Source To change the band, press (MODE) 1 1 B Track name* , Disc/artist name* , Artist repeatedly. You can select from FM1, FM2, 1 2 1 name* , Album number* , Album name* , FM3, AM1 or AM2. Track number/Elap
Summary of the content on the page No. 10
MENU 3 Adjust the volume. iPod Press (OFF) to stop playback. Tips Playing back iPod � When the ignition key is turned to the ACC position, or the unit is on, the iPod will be recharged. By connecting an iPod to the dock connector at � If the iPod is disconnected during playback, “NO the rear of the unit, you can listen on your car IPOD” appears in the display of the unit. speakers, while controlling the iPod from the unit. Resume mode For details on the compatibility of your iPod, see When
Summary of the content on the page No. 11
Setting the play mode Operating an iPod directly — Passenger control 1 During playback, press (MODE). The mode changes as follows: You can operate an iPod connected to the dock ALBUM t TRACK t PODCAST* t connector directly. GENRE t PLAYLIST t ARTIST * May not appear depending on iPod setting. 1 During playback, press and hold (MODE). “MODE IPOD” appears and you will be able Skipping albums, podcasts, genres, to operate the iPod directly. playlists and artists To Press To change the display
Summary of the content on the page No. 12
Other functions Adjusting setup items — SET 1 Press and hold the select button. Changing the sound settings The setup display appears. 2 Press the select button repeatedly Adjusting the sound until the desired item appears. characteristics — BAL/FAD/SUB 3 Rotate the control dial to select the You can adjust the balance, fader, and subwoofer setting (example “ON” or “OFF”). volume. 4 Press and hold the select button. 1 Press the select button repeatedly The setup is complete and the display
Summary of the content on the page No. 13
3 1 Turn down the volume on the unit. LPF NORM/REV* (Low Pass Filter Normal/ Reverse) 2 Press (SOURCE) repeatedly until “AUX” Selects the phase when the LPF is on: “NORM,” appears. “REV.” “AUX FRONT IN” appears. HPF (High Pass Filter) 3 Start playback of the portable audio device at a Selects the front/rear speaker cut-off frequency: moderate volume. “OFF,” “80Hz,” “100Hz,” “120Hz,” “140Hz,” 4 Set your usual listening volume on the unit. “160Hz.” 5 Press the select button repeatedly until “AU
Summary of the content on the page No. 14
� Discs that this unit CANNOT play Additional Information – CD-R/CD-RW of poor recording quality. – CD-R/CD-RW recorded with an incompatible recording device. Precautions – CD-R/CD-RW which is finalized incorrectly. – CD-R/CD-RW other than those recorded in � Cool off the unit beforehand if your car has been music CD format or MP3 format conforming to parked in direct sunlight. ISO9660 Level 1/Level 2, Joliet/Romeo or � Power antenna (aerial) extends automatically. multi-session. Moisture c
Summary of the content on the page No. 15
Cleaning the connectors Maintenance The unit may not function properly if the connectors between the unit and the front panel are not clean. In order to prevent this, detach the front panel (page 5) Replacing the lithium battery of the and clean the connectors with a cotton swab. Do not card remote commander apply too much force. Otherwise, the connectors Under normal conditions, the battery will last may be damaged. approximately 1 year. (The service life may be shorter, depending on th
Summary of the content on the page No. 16
Removing the unit Specifications 1 Remove the protection collar. AUDIO POWER SPECIFICATIONS 1Detach the front panel (page 5). CEA2006 Standard 2 Pinch both edges of the protection collar, Power Output: 17 Watts RMS × 4 at 4 Ohms < 1% THD+N then pull it out. SN Ratio: 82 dBA (reference: 1 Watt into 4 Ohms) CD Player section Signal-to-noise ratio: 120 dB Frequency response: 10 – 20,000 Hz Wow and flutter: Below measurable limit Tuner section x FM Tuning range: 87.5 – 107.9 MHz Antenna (aerial)
Summary of the content on the page No. 17
Supplied accessories: Card remote commander: RM-X151 Troubleshooting Parts for installation and connections (1 set) Optional accessories/equipment: The following checklist will help you remedy BUS cable (supplied with an RCA pin cord): problems you may encounter with your unit. RC-61 (1 m), RC-62 (2 m) Before going through the checklist below, check the CD changer (10 discs): CDX-757MX connection and operating procedures. CD changer (6 discs): CDX-T69 If the problem is not solved, visit the
Summary of the content on the page No. 18
The Auto Off function does not operate. Automatic tuning is not possible. The unit is turned on. The Auto Off function activates � Setting of the local seek mode is not correct. after turning off the unit. t Tuning stops too frequently: t Turn off the unit. Set “LOCAL-ON” (page 12). t Tuning does not stop at a station: Set “MONO-ON” (page 12). CD playback � The broadcast signal is too weak. The disc cannot be loaded. t Perform manual tuning. � Another disc is already loaded. During FM reception,
Summary of the content on the page No. 19
NO MAG The disc magazine is not inserted in the CD changer. tInsert the disc magazine in the CD changer. NO MUSIC The disc/iPod does not contain a music file. t Insert a music CD in this unit or an MP3 playable CD changer. tConnect the iPod with a music file in it. NO NAME A disc/album/artist/track name is not written in the track. NO SUPRT The connected iPod is not supported. OFFSET There may be an internal malfunction. t Check the connection. If the error indication remains on in the displa
Summary of the content on the page No. 20
En ce qui concerne l’installation et les Avertissement si le contact de votre connexions, consulter le manuel véhicule ne comporte pas de position d’installation/raccordement fourni. ACC Veillez à régler la fonction arrêt automatique (page 13). ATTENTION L’appareil s’éteint complètement et L’utilisation d’instruments optiques avec ce automatiquement après le laps de temps choisi produit augmente les risques pour les yeux. une fois l’appareil mis hors tension afin d’éviter que la batterie
