Behringer B212/B215 user manual

Summary of the content on the page No. 1

User’s manual
Version 1.2 May 2006
EUROLIVE B212/B215

Summary of the content on the page No. 2

EUROLIVE B212/B215 DETAILED SAFETY INSTRUCTIONS: IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. CAUTION: To reduce the risk of electric shock, do not remove 5) Do not use this device near water. the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified 6) Clean only with a dry cloth. personnel. 7) Be sure to mount your speakers on a solid, stable and level base or st

Summary of the content on the page No. 3

B212/B215 EUROLIVE B212/B215 EUROLIVE 500/600-Watt 2-Way PA Speaker System with 12"/15" Woofer and 1.75" Compression Driver High-power 2-Way PA sound reinforcement speaker system for live and playback applications (B212: 125 Watts Continuous / 500 Watts Peak Power and B215: 150 Watts Continuous / 600 Watts Peak Power) Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels Extremely powerful 12"/15" long-excursion driver provides incredible

Summary of the content on the page No. 4

EUROLIVE B212/B215 TABLE OF CONTENTS FOREWORD 1. INTRODUCTION ......................................................... 4 Dear customer, 1.1 Before you get started ................................................... 4 1.1.1 Shipment ................................................................ 4 welcome to the team of 1.1.2 Initial operation ....................................................... 5 EUROLIVE users, and thank 1.1.3 Online registration ...........................................

Summary of the content on the page No. 5

EUROLIVE B212/B215 1.1.2 Initial operation ATTENTION: Never connect the output signals of different power amps to both parallel inputs at the Your B212/B215 speakers are connected to a power amplifier same time. This may permanently damage your using the speaker connectors located in the back. Please read setup. ch. 4, “ADDITIONAL CONSIDERATIONS” and ch. 5, “APPLICATION EXAMPLES” to get important technical information and practical The B212/B215 includes 2, parallel ¼“ loudspeaker inpu

Summary of the content on the page No. 6

EUROLIVE B212/B215 3.4 Loudspeaker protection 5. APPLICATION EXAMPLES by using a low-cut filter Try to prevent damage to your speakers caused by extreme 5.1 Full-range stereo operation oscillation of the bass membrane due to subsonic noise and In the following example, the main output signal of a mixing extremely deep frequencies. Use an equalizer to cut off those console is connected to a power amplifier. Both the outputs and frequencies that fall below your speakers’ frequency range, or inputs

Summary of the content on the page No. 7

EUROLIVE B212/B215 5.3 Stereo operation with a subwoofer Using a crossover, the main output signal of a mixing console is split into a stereo signal and a mono signal. The mono signal covers the lower frequency range and the stereo signal covers all other frequency ranges. Then, the stereo signal is connected to a stereo power amplifier. A B212/B215 is connected to each of the amp outputs. The mono subwoofer signal is connected to one channel of an additional power amplifier, which powe

Summary of the content on the page No. 8

EUROLIVE B212/B215 2. If the product needs to be modified or adapted in order to 8. WARRANTY comply with applicable technical or safety standards on a national or local level, in any country which is not the country for which § 1 OTHER WARRANTY RIGHTS AND NATIONAL LAW the product was originally developed and manufactured, this 1. This warranty does not exclude or limit the buyer’s statutory modification/adaptation shall not be considered a defect in rights provided by national law, in particular