Summary of the content on the page No. 1
DIGITAL VIDEOCASSETTE RECORDER
DVW-M2000
DVW-M2000P
DVW-2000
DVW-2000P
Note
The supplied CD-ROM includes operation manuals for the DVW-2000 series of
digital videocassette recorders (English, Japanese, French and German versions).
For more details, see page 1-5 “Using the CD-ROM Manual.”
TM
[English]
OPERATION MANUAL
1st Edition (Revised 2)
Summary of the content on the page No. 2
For the customers in the USA WARNING This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of To prevent fire or shock hazard, do not the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the expose the unit to rain or moisture. equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency To avoid electrical shock, do not ope
Summary of the content on the page No. 3
AVERTISSEMENT: CET AVERTISSEMENT EST For the customers in Europe VALABLE POUR LES AUTRES PAYS. This product with the CE marking complies with both the EMC Directive (89/336/EEC) and the Low Voltage Directive 1. Utiliser un cordon d’alimentation approuvé (conducteur (73/23/EEC) issued by the Commission of the European d’alimentation 3 âmes)/connecteur d’appareil/prise avec Community. contacts de mise à la terre conforme aux règles de Compliance with these directives implies conformity to the sécu
Summary of the content on the page No. 4
Table of Contents 1-1 Features ........................................................................................... 1-1 Chapter 1 1-2 Example System Configuration .................................................... 1-4 Overview 1-3 Using the CD-ROM Manual .......................................................... 1-5 1-3-1 CD-ROM System Requirements ............................................ 1-5 1-3-2 Preparations.........................................................................
Summary of the content on the page No. 5
Table of Contents 5-2 DMC Editing ................................................................................. 5-11 Chapter 5 5-2-1 Overview of DMC Editing ................................................... 5-11 Editing (Continued) 5-2-2 Carrying Out DMC Editing.................................................. 5-12 5-3 Special Automatic Editing Methods ........................................... 5-13 5-3-1 Quick Editing .....................................................................
Summary of the content on the page No. 6
6-1 11-1 Overview of the Function Menu ............................................... 11-1 Chapter 11 11-1-1 Function Menu Configuration ........................................... 11-1 Function Menu 11-1-2 Using the Function Menu .................................................. 11-2 11-2 Function Menu Item List ........................................................... 11-3 12-1 Setup Menu Configuration ........................................................ 12-1 Chapter 12 12-2 Setup Menu
Summary of the content on the page No. 7
Chapter 1 Overview Chapter 1 Overview 1-1 Features The DVW-M2000/M2000P/2000/2000P is a digital lightweight, and low power consumption design. videocassette recorder based on the digital Betacam It not only offers recording and playback in digital format. Betacam format, but can also play back tapes recorded This unit uses large scale integrated circuits for signal in Betacam SX format, analog Betacam format, or 1) processing, and has a simple internal construction, MPEG IMX format . allowing it
Summary of the content on the page No. 8
Chapter 1 Overview 1-1 Features High-performance heads and compatibility High quality four-channel audio playback function High quality 20 bit/48 kHz digital audio is supported. There are four digital audio input/output channels, and The newly developed high-performance heads and four analog audio input/output channels. dynamic tracking (DT) technology provide high- density recording and playback in narrow tracks with high reliability. In addition to the digital Betacam Newly developed multifunc
Summary of the content on the page No. 9
Chapter 1 Overview High quality variable speed playback and Cross-fade editing digital jog sound function In audio editing, to avoid unnatural effects at edit 1) points, you can fade the audio track. The setting allows In digital Betacam or MPEG IMX format playback, you to select fade-in, fade-out, or cut-in. the dedicated playback DT heads allow smooth, noiseless playback from –1 to +3 times normal speed. In analog Betacam compatible playback also, similar Tele-File functions dedicated DT heads
Summary of the content on the page No. 10
Chapter 1 Overview 1-1 Features 1-2 Example System Configuration The following conceptual diagram shows an example of use. Microphone BVE-series editor Tape control Digital/analog cassette Audio/video SDI server system DVW-M2000/M2000P/2000/2000P Video monitor Analog composite Analog composite/component Analog audio SDI Audio monitor VTR with SDI connectors or analog VTR 1-4 Chapter 1 Overview
Summary of the content on the page No. 11
Chapter 1 Overview 1-3 Using the CD-ROM Manual The supplied CD-ROM includes operation manuals for 1-3-3 Reading the CD-ROM the DVW-2000 series of digital videocassette recorders Manual (English, Japanese, French, and German versions). To read the operation manual contained on the CD- 1-3-1 CD-ROM System ROM disc, do the following. Requirements 1 Insert the CD-ROM disc in your CD-ROM drive. The following are required to access the supplied CD- ROM disc. A cover page appears automatically in your
Summary of the content on the page No. 12
Chapter 2 Location and Function of Parts Chapter 2 Location and Function of Parts 2-1 Control Panels There are three control panels, as follows: •Upper control panel • Lower control panel •Switch panel Z Upper control panel (see page 2-2) VID. IN PB/EE CONFI CTL/TCMENU TCGSET Y-R,B PB OFF TC Lower control panel (see page 2-3) CONTROL PANEL Switch panel (access by opening the lower control panel) (see page 2-14) KEY INHI PANEL SEL ON OFF REAR FRONT Lower control panel unlock buttons Pushing in t
Summary of the content on the page No. 13
Chapter 2 Location and Function of Parts 2-1 Control Panels 2-1-1 Upper Control Panel 1 POWER switch 2 REMOTE buttons and RS-232C indicator 3 EJECT button Cassette compartment 4 Format indicators BETACAM/SP BETACAM SX MPEG IMX Digital BETACAM REMOTE POWER EJECT 1(9P) 2(50P) RS-232C Z PHONES 5 PHONES jack and control 1 POWER switch Note Pressing the ‘ ) ’ side of the switch powers the unit on. Ejecting with the EJECT button is a local operation. It When the unit is powered on, the audio setting d
Summary of the content on the page No. 14
Chapter 2 Location and Function of Parts 2-1-2 Lower Control Panel 4 Time data/menu display section (see page 2-7) 2 CHANNEL CONDITION 5 MULTI CONTROL knob and SHIFT indicator (see page 2-6) indicator (see page 2-8) 1 Audio control section 3 Menu control buttons 6 RESET button (see page 2-8) (see page 2-4) (see page 2-6) VID. IN PB/EE CONFI CTL/TCMENU TCGSET Y-R,B PB OFF TC 7 Search control section (see page 2-8) 8 REC INHI indicator (see page 2-10) 9 Tape transport control section (see page 2-
Summary of the content on the page No. 15
Chapter 2 Location and Function of Parts 2-1 Control Panels MIXING (mixing setting mode) button: Pressing 1 Audio control section this button puts the unit into mixing setting mode. In the audio setting display section, the MIX 1 Audio selection function selector buttons indicator flashes. In this state, you can use the 2 DISPLAY FULL/FINE button audio signal selection buttons to specify which input channel signal will be recorded on which 3 Audio setting display section audio track on the tape
Summary of the content on the page No. 16
Chapter 2 Location and Function of Parts 3 Audio setting display section Input channel indicator: Indicates the input channel from which audio signals are recorded on the Input signal indicator audio track. Two numbers light to indicate that signals from the corresponding input channels are SDI DATA indicator AES/EBU/ANA mixed for recording. DATA 5 6 7 8 Input channel Monitor channel L and R indicators: Indicate MIX 1 2 3 4 MIX indicator indicator dB OVER dB whether or not the signals of the tra
Summary of the content on the page No. 17
Chapter 2 Location and Function of Parts 2-1 Control Panels Note 6 PB (playback) controls These adjust individually the playback levels on Before selecting signals from two input channels channels 1 to 4 and cue audio. for recording in one recorder channel, check to be During playback, press to protrude the control knobs sure that the emphasis settings (ON or OFF) of the and adjust the level while monitoring the audio level two input channels are the same. Recording and indication on the level m
Summary of the content on the page No. 18
Chapter 2 Location and Function of Parts If there is no setting displayed in the lower line of Time data display area 1 the menu display, even though a menu item is Normally this displays a CTL count, time code value, displayed in the upper line, pressing the or user bit value according to the setting in function corresponding function button moves to a lower menu HOME page for F4 (CTL/TC). menu level. Time data type indicator Overview of the function menu This indicates the type of data display
Summary of the content on the page No. 19
Chapter 2 Location and Function of Parts FORWARD VAR 2-1 Control Panels CONFI (ON)/PREREAD indicators 2 Menu display 1) These indicate the state of the VTR CONFI playback This displays the function menu and setup menu. function. When the CONFI playback function is For details on the function menu, see Chapter 11 and for enabled by the setting in function menu HOME page, details on the setup menu, see Chapter 12. the CONFI indicator appears, and when CONFI playback is actually being carried out t
Summary of the content on the page No. 20
Chapter 2 Location and Function of Parts Playback modes using the search dial 1 SHUTTLE button To use the search dial for playback in shuttle mode, Playback mode Operations and functions press this button, turning it on. Press the SHUTTLE button or the Shuttle search dial so that the SHUTTLE button lights, then turn the search dial. For details of playback in shuttle mode, see the description Playback is carried out at a speed of the search dial 5. determined by the position of the search dial.
