Summary of the content on the page No. 1
70530 Rev 4 2/6/04 2:53 PM Page 1
Steam cleaner with attachments
Please read and keep these instructions
getting the best from your
new steam cleaner...
• Quick start
1 Fill the tank up to a maximum of 1.4 litres of water (using warm
water and less water will reduce heat-up time). Screw cap on
and tighten fully.
2 Attach the required accessories.
3 Connect to the power supply.
4 Press the on/off button to start heat-up. When orange light turns
off, the steam is ready.
5 Press the trigger on
Summary of the content on the page No. 2
70530 Rev 4 2/6/04 2:53 PM Page 2 Other safety considerations Important safety • Do not use any chemical detergents, instructions perfumes, alcohol etc in the water. • Repairs to electrical appliances are only The use of any electrical appliance to be undertaken by trained personnel. requires the following common sense safety Unprofessional repairs can be rules. dangerous for users. Primarily there is danger of injury or • Use only genuine Goblin spare parts and death and secondly the danger
Summary of the content on the page No. 3
70530 Rev 4 2/6/04 2:53 PM Page 3 Illustration A fl ⁄ fi ¤ „ ‰ › Û ‹ ‚ Ê Â · ‡ È Ò Ë Á Ï Í Ô Î Ó Ù Ú Ì Features Accessories you should have Measuring jug Ò Elbow attachment (shown ⁄ Filler cap Ê Extension tubes attached to floor nozzle) ¤ On/off switch Á Floor nozzle Ú Cloth cap for upholstery ‹ Tool storage cover Ë Window squeegee attachment nozzle › Wheel È Upholstery nozzle Û Funnel fi Tube park (see page 9) Í Jet nozzle Ù Jet nozzle adaptor fl Carrying handle Î Angled nozzle ‡ Hose Ï Sma
Summary of the content on the page No. 4
70530 Rev 4 2/6/04 2:53 PM Page 4 Accessory assembly · Ù Í È Ì È Ú Ë Ï Î Please refer to the assembly sequence to assemble your steam cleaner. 4
Summary of the content on the page No. 5
70530 Rev 4 2/6/04 2:53 PM Page 5 IMPORTANT: The water tank should be Operation emptied after use. IMPORTANT: Allow the water tank to dry Please remember that the steam cleaner out before replacing the cap. operates by emitting steam at an increased temperature of 130˚C. Never use it on objects or surfaces which cannot resist this Re-filling the boiler temperature, delicate materials, dralon, plastic, natural fur etc. Where any doubt WARNING: Always switch off, unplug exists check carefully
Summary of the content on the page No. 6
70530 Rev 4 2/6/04 2:53 PM Page 6 On/off switch Steam Trigger 1 When the water tank has been filled, 'see WARNING: At the start water may be filling the boiler,' insert the plug into the ejected. Aim the steam safely. Start by power socket. releasing the steam into a bucket or sink. 2 Switch the cleaner on by pressing the The cleaner is now ready for use when on/off switch to 'on'. The power indicator the orange steam ready light goes out. light (red) and the steam ready light 1 Ensure the sa
Summary of the content on the page No. 7
70530 Rev 4 2/6/04 2:53 PM Page 7 1 Fit the elbow attachment to the floor Attaching tubes & handle 1 nozzle and twist / a turn. 2 WARNING: Unplug the unit and allow to cool before fitting or changing attachments as they become hot during use. Attach the desired accessory to the hose handle, extension tubes can be attached to the handle for extra reach. 1 Push the extension tubes onto the connection nozzle as far as it will go until you hear a click. 2 Fit the floor nozzle to the extension tub
Summary of the content on the page No. 8
70530 Rev 4 2/6/04 2:53 PM Page 8 • The cleaning power of the cloth can be • The jet nozzle can be used with various optimised by turning and changing the fittings for cleaning inaccessible areas cleaning cloth regularly. such as corners, joints, blinds, radiators •To clean very dirty areas, move the and toilets as well as various surfaces cleaning nozzle over the surface more such as stainless steel, windows, slowly in order to increase the cleaning mirrors, enamelled surfaces and also for a
Summary of the content on the page No. 9
70530 Rev 4 2/6/04 2:53 PM Page 9 Window attachment Tube park 1 Locate the window squeegee onto the • During use the tubes and nozzle can be two tabs at the bottom of the upholstery stored in the park position for short nozzle. Then push the top of the breaks whilst cleaning. squeegee until the clip goes over the top of the upholstery nozzle. Tool storage • This attachment is ideal for cleaning windows, mirrors, ceramic tiles and other • The accessories for your steam cleaner non porous smoot
Summary of the content on the page No. 10
70530 Rev 4 2/6/04 2:53 PM Page 10 After use Descaling 1 Switch the cleaner off and unplug from In order to prolong the life of your cleaner you should descale the steam tank the socket. Wait until the cleaner has at least every 6 months. cooled down completely. 1 Switch the cleaner off, unplug and allow 2 Release any steam pressure by pressing to cool. the steam trigger on the handle 2 Empty any water out of the tank. 3 Mix the descaler in the measuring jug using warm water. We recommend u
Summary of the content on the page No. 11
70530 Rev 4 2/6/04 2:53 PM Page 11 Care and maintenance Helpline Your cleaner is manufactured to If you have any difficulty with your withstand normal day-to-day use, but an appliance do not hesitate to call us. We are occasional wipe over with a damp cloth will likely to be more help than the store from help maintain its good looks. Abrasive where it was bought. cleaners should not be used. Please have the following information ready to enable our staff to help you. Purchasing parts • Name o
Summary of the content on the page No. 12
70530 Rev 4 2/6/04 2:53 PM Page 12 the new item will be calculated from original Your two year guarantee purchase date. Therefore it is vital to retain your original till receipt or invoice to indicate the date It is important to retain the retailers receipt as of initial purchase. proof of purchase. Staple your receipt to this To qualify for the 2 year guarantee the back cover for future reference. appliance must have been used according to Please quote the following information if the the m
