Summary of the content on the page No. 1
Summary of the content on the page No. 2
Fill in and retain The HOOVER vacuum cleaner you have just purchased is a combination cleaner. It has a nozzle for use on carpet and floors and cleaning tools for other tasks. The model and serial number are located on the bottom of the cleaner. For your personal records, please enter the COMPLETE model and serial number In the spaces provided and retain this information. Your cleaner is model and has serial number It Is suggested that you attach your sales receipt to this owner’s manual. Verifi
Summary of the content on the page No. 3
Important Safeguards! When using electrical appliance, basic precautions be including READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE n To reduce the risk of fire, electric shock, or Warning. injury: . Do not use outdoors5 on wet surfaces. . Close supervision is necessary when any appliance is used by or near children. Do not allow vacuum cleaner to be used as a toy or to unattended at any time. . Keep hair, loose clothing, fingers, feet and all parts of body away from openings, and mov
Summary of the content on the page No. 4
The cleaner assembled will look Unpacking like the drawing below. Unpack cleaner from carton and identify the parts shown. Re- move and dispose of the card- board packing. C. Paper bag D. Extension wands and hose 3 B. Rug and floor nozzle A. Canister cleaner
Summary of the content on the page No. 5
1. Tool storage tray: provides internal storage for crevice tool, furniture nozzle, and dusting brush Crevice tool Furniture nozzle Deluxe rug and floor nozzle Carrying handle . Cover: removed by lifting up top section of carrying handle and pulling forward. Large wheels: provide easy towing, when hose is used to pull cleaner over carpet, area rugs and door sills. On-Off switch: conveniently located on top of cleaner. Plastic latch ring: located on extension wands and hand grip; rotate ring to a
Summary of the content on the page No. 6
How to assemble 1. Connect hose insert hose end with cord into opening of cleaner, lining up largest projection on hose with largest notch of opening. Turn To disconnect, depress latch, and turn hose to the left. 2. Attach wands, tools and nozzle or tool, turn plastic latch ring on hand grip until outer slot lines up with inner slot. Push hand grip down onto wand or tool so that button projection fits into slot. Turn latch ring to lock in place. Attach second wand and nozzle or tools in the same
Summary of the content on the page No. 7
Suction regulator The suction regulator is located on the hand grip and is used to increase or decrease suction for various cleaning tasks. Set suction regulator to MINIMUM, MEDIUM or MAXIMUM suction by rotating plastic ring until raised plastic indicator on dial is directly under desired setting. Cleaning toots A variety of useful cleaning tools is included with your cleaner. These tools and their uses are shown below. The wail/floor brush is available at a nominal cost from your Authorized Hoo
Summary of the content on the page No. 8
To connect and remove tools Tools attach to wand or hand grip by rotating plastic latch ring until slots in the opening align; insert tool and turn latch ring, as shown, to lock tool in place. To remove tool, reverse the above To clean stairs Clean stairs by placing cleaner on end as shown. Clean stairs from bottom to top. Maintenance Familiarize yourself with these home maintenance tasks and keep this owner’s manual in a convenient place where you can refer to it when needed. Proper use and car
Summary of the content on the page No. 9
Where to buy Bags may be purchased from your local Authorized Hoover Dealer or from a Hoover Factory Service Center. When purchasing bags, be sure to give the model number of your cleaner. What to buy Use HOOVER bag Type K with this cleaner. To assure that your HOOVER cleaner operates HOOVER, peak performance, it is imperative that you use only genuine HOOVER paper bags made by The Hoover Company. HOOVER bags can be identified by the trademarks - - How to replace Disconnect cleaner from electri
Summary of the content on the page No. 10
Obstructions Remove larger items from carpet and floor surfaces before vacuuming to help prevent obstructions in hose, wands or nozzle connector, and to maintain There are two conditions that will indicate that an obstruction has occurred: Cleaner stops running (See Cleaner continues to run, but suction is low. (See Clearing obstructions Thermal protector An internal thermal protector has been used in your cleaner to prevent over- heating if a large item or clog is caught in the nozzle or at
Summary of the content on the page No. 11
Secondary filter How to clean Disconnect cleaner from electri- cal outlet. The secondary filter protects the motor from dirt particles. If the filter becomes dirty, either clean or replace it. The secondary filter is located inside the cleaner behind the paper bag. To remove filter, first remove cover of cleaner, then lift out filter. Clean filter by rinsing it in water. When dry, slide filter back into position. the secondary filter in place. Rug and floor node To maintain cleaning effectivenes
Summary of the content on the page No. 12
. 1 If you have a problem This appliance was inspected thoroughly and was in good operating tion when it was shipped from the factory. If a minor problem occurs, it usually can be solved quite easily when the cause is found. Therefore, this check list is provided to assist you. Problem Possible cause Possible solution A. Cleaner 1. Not firmly plugged in. 1. Plug unit in firmly. t won’t run 2. No voltage in wall plug. 2. Check fuse or breaker. 3. Blown fuse/tripped breaker. 3. Replace fuse/reset
Summary of the content on the page No. 13
I @j HOOVER and 0 are trademarks of THE HOOVER COMPANY, NORTH CANTON, OHIO 44720 LithoUSA 56513-310 1 I-90 S3619/27
