Summary of the content on the page No. 1
WALK BEHIND SCRUBBER
Operating Instructions (ENG)
Instrucciones de funcionamiento (SPA)
MODELS: SC264
10052210
SCC264
10052250
IPX4
Read these instructions before using the machine
Lea las instrucciones antes de utilizar la máquina
BM
86039070 02/20/09
PR V NO. 98963
Summary of the content on the page No. 2
MACHINE DATA LOG/OVERVIEW MODEL _______________________________________ DATE OF PURCHASE __________________________ SERIAL NUMBER ______________________________ SALES REPRESENTATIVE # _____________________ DEALER NAME ________________________________ OPERATIONS GUIDE NUMBER ___________________ PUBLISHED __________________________________________
Summary of the content on the page No. 3
TABLE OF CONTENTS Machine Data Log/Overview.........................2 Traction Motor Brush Replacement .. .........4-10 Table of Contents..........................................3 Circuit Breaker.................................. .........4-10 Brush Shrouds & Brush Skirts .......... .........4-10 Vacuum Motor .................................. .........4-11 HOW TO USE THIS MANUAL Greasing Instructions........................ .........4-12 Machine Troubleshooting .................
Summary of the content on the page No. 4
HOW TO USE THIS MANUAL This manual contains the following sections: The SAFETY section contains important information regarding hazard or unsafe practices of the - HOW TO USE THIS MANUAL machine. Levels of hazards are identified that could - SAFETY result in product or personal injury, or severe injury - OPERATIONS resulting in death. - MAINTENANCE The OPERATIONS section is to familiarize the - PARTS LIST operator with the operation and function of the machine. The HOW TO USE
Summary of the content on the page No. 5
IMPORTANT SAFETY INSTRUCTIONS When using an battery powered appliance, basic precaution must always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. To reduce the risk of fire, electric shock, or injury: ! WARNING: Use only indoors. Do not use outdoors or expose to rain. Use only as described in this manual. Use only manufacturer’s recommended components and attachments. If the machine is not working properly, has been dropped, damaged, left
Summary of the content on the page No. 6
HAZARD INTENSITY LEVEL The following symbols are used throughout this guide as indicated in their descriptions: HAZARD INTENSITY LEVEL There are three levels of hazard intensity identified by signal words -WARNING and CAUTION and FOR SAFETY. The level of hazard intensity is determined by the following definitions: ! WARNING WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death. ! CAUTION CAUTION - Hazards or unsafe practices which could res
Summary of the content on the page No. 7
SAFETY LABEL LOCATION NOTE: These drawings indicate the location of safety labels on the machine. If at any time the labels become illegible, promptly replace them. SAFETY DECAL 86252530 PRV NO. 81494 BATTERY CAUTION 86252520 PRV NO. 80885 CIRCUIT BREAKER DECAL 86243530 SEE MANUAL PRV NO. 500565 2% GRADE WARNING CUTTER 24V 86039070 04/10/07 2-3
Summary of the content on the page No. 8
TECHNICAL SPECIFICATIONS ITEM DIMENSION/CAPACITY Nominal power 1450 W Rated Voltage 24VDC Rated Amperage 60 Amps Batteries 4 X 6 Volt 250-305-335 AH @ 20 hr rate Scrub Brush Motors 2 X .75 hp (0.56 kW) Vacuum Motor .75 hp (0.56 Kw) Propelling Motor .3 hp (0.22 Kw) Mass (GVW) 915 lbs. (415 kg) with 335 AH Weight empty without batteries 346 lbs. (157 kg) Solution Control Gravity feed, fully variable with automatic shut-off in neutral Solution tank capacity 23 gal. (87 l) Recove
Summary of the content on the page No. 9
TECHNICAL SPECIFICATIONS ITEM MEASURE Height 45 in. (114 cm) Length with 26 in. (66 cm) scrub head 64 in. (163 cm) Width without squeegee and scrub head 24 in. (61 cm) Width of squeegee for 26 in. (66 cm) scrub head 35 in. (89 cm) Width of scrub path for 26 in. (66 cm) scrub head 26 in. (66 cm) Length Width Height SPECIAL NOTES: The sound pressure level at the operator’s ear was measured to be 72 dBA. This was a nearfield, broad-band measur
Summary of the content on the page No. 10
HOW THE MACHINE WORKS The Saber Cutter is a battery powered, self- The function of the recovery system is to vacuum propelled, hard floor scrubber intended for the soiled water back into the recovery tank. The commercial use. The appliance applies a recovery system consists of the squeegee, cleaning solution onto a hard floor, scrubs the vacuum motor, float ball filter, recovery tank and floor with brushes, and then vacuums the soiled controls. The squeegee wipes the dirty solution w
Summary of the content on the page No. 11
COMPONENTS 12 14 3 1 7 2 11 9 15 6 8 4 13 5 10 1. Control Panel 2. Front Cover 3. Recovery Tank 4. Recovery Tank Drain Hose 5. Scrub Head Shrouds 6. Solution Tank 7. Solution Tank Cover 8. Solution Tank Drain Hose 9. Solution Strainer 10. Squeegee 11. Aqua-Mizer 12. Top Cover 13. Vacuum Motor 14. Recovery Tank Dome 15. Accessory Pump Port (Optional) CUTTER 24V 86039070 04/10/07 3-4
Summary of the content on the page No. 12
CONTROLS 13 2 5 3 9 6 8 15 1 4 10 7 14 11 12 CUTTER 24V 86039070 04/10/07 3-5
Summary of the content on the page No. 13
CONTROLS 9. Vacuum Switch 1. Key Switch 10. Squeegee Lift Lever 2. Emergency Shut Off Switch (Optional) 11. Squeegee Pitch Adjustment Knob 3. Speed Control Knob 12. Squeegee Deflection Adjustment Knobs 4. Propel Control Lever 13. Battery Charge Level Indicator 5. Reverse Button 14. Parking Brake (Optional) 6. Brush Switch 15. Hour Meter (Optional) 7. Brush Lift Lever 8. Solution Control Knob 1. KEY SWITCH 4. PROPEL CONTROL LEVERS Controls the power for machine
Summary of the content on the page No. 14
CONTROLS 7. BRUSH PRESSURE LEVER 11. SQUEEGEE PITCH ADJUSTMENT Adjusts the amount of brush pressure to the floor by KNOB raising or lowering the scrub deck. Adjusts the deflection at the ends of the squeegee. To apply brush pressure, lower brush pressure lever to floating position. To increase squeegee blade deflection at the ends, turn knob counterclockwise. To apply additional pressure, place lever in restricted To decrease squeegee blade deflection position. Lock the
Summary of the content on the page No. 15
CONTROLS 13. BATTERY CHARGE LEVEL INDICATOR Indicates the charge level of the batteries. The meter display is divided into 10 vertical bars. Bar illuminated on the far right indicate full charge. Bars flashing near the left side indicate the batteries should be recharged. Further operation of the machine could damage the machine or the batteries. When the machine is left overnight with less than a full charge, the display may initially indicate a full charge. It will also in
Summary of the content on the page No. 16
MACHINE OPERATION FILLING SOLUTION TANK PRE-RUN MACHINE INSPECTION FOR SAFETY: Before leaving or servicing Do a pre-run inspection to find possible problems that machine; stop on level surface, turn off machine could cause poor performance or lost time from and remove key. breakdown. Follow the same procedure each time to avoid missing steps. 1. Turn the machine power off. NOTE: See maintenance section for pre-run machine inspection checklist items. 2. Set the parking br
Summary of the content on the page No. 17
MACHINE OPERATION NORMAL SCRUBBING TO BEGIN SCRUBBING Plan the scrubbing pattern in advance. The longest track is around the perimeter of the area ! WARNING to be cleaned. For efficient operation, the runs When operating the machine around people, pay close attention for unexpected movement. Use should be the longest possible without turning, extra caution around children. stopping, or raising and lowering scrub deck/squeegee. ! CAUTION NOTE: In order to achieve the
Summary of the content on the page No. 18
MACHINE OPERATION RECOVERY TANK DOUBLE SCRUB 1. Unhook the large drain hose from the retainer. For floors which are heavily soiled or have thick Unscrew the T-handle on plug enough to loosen accumulations of floor finish may not clean plug, then lower hose in direction of the drain. sufficiently with one pass. In these cases it will be Do not stand in front of end of hose. Recovered necessary to double scrub. solution will come out with force. Slowly remove To double scrub, mak
Summary of the content on the page No. 19
MAINTENANCE SERVICE SCHEDULE MAINTENANCE DAILY WEEKLYMONTHLY 100 200 HRS HRS Check batteries after charging; add water if necessary * Check pad wear to prevent buildup of * chemicals Check linkages and connectors for wear and damage * Check hoses for wear, blockages, or damage * Clean squeegee; check for adjustment; inspect for wear * Check handles, switches, knobs, domes, and gaskets for damage * Clean out recovery tank * Clean out solution
Summary of the content on the page No. 20
MAINTENANCE 5 1 7 9 6 11 3 8 4 2 10 1. Batteries 2. Squeegee 3. Aqua Mizer 4. Scrub Brushes 5. Recovery Tank Float Shut-Off 6. Solution Strainer 7. Brush Motor 8. Traction Motor 9. Circuit Breakers 10. Brush Shroud & Brush Skirts 11. Vacuum Motor CUTTER 24V 86039070 04/10/07 4-2
