Summary of the content on the page No. 1
Carpet Maintainer
MODELS: IM
10066360
IMIE17
10066550
IMX
10066400
IMXIE17
10066410
Read instructions before operating the machine.
Operating Instructions (ENG)
L
86269870 08/20/08
PRV NO. 980305
Summary of the content on the page No. 2
DATA LOG/OVERVIEW MODEL _______________________________________ DATE OF PURCHASE __________________________ SERIAL NUMBER ______________________________ SALES REPRESENTATIVE # _____________________ YOUR DEALER NAME: __________________________________________________________________________________________________ ADDRESS:___________________________________________
Summary of the content on the page No. 3
TABLE OF CONTENTS Data Log/Overview. ...................................2 PARTS LIST Table of Contents.......................................3 Brush ........................................................5-1 HOW TO USE THIS MANUAL Brush Lift ...................................................5-3 Decal..........................................................5-5 How to use this Manual..............................1-1 Electrical-120V.....................................
Summary of the content on the page No. 4
HOW TO USE THIS MANUAL This manual contains the following sections: The PARTS LIST section contains assembled parts illustrations and corresponding parts list. The parts - HOW TO USE THIS MANUAL lists include a number of columns of information: - SAFETY - OPERATIONS - REF – column refers to the reference - MAINTENANCE number on the parts illustration. - PARTS LIST - PART NO. – column lists the part number for the part. The HOW TO USE THIS MANUAL section will tell - QTY – colum
Summary of the content on the page No. 5
SAFETY IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precaution must always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. ! WARNING: To reduce the risk of fire, electric shock, or injury: Connect to a properly grounded outlet. See Grounding Instructions. Do not leave the machine unattended. Unplug machine from outlet when not in use and before maintenance or servic
Summary of the content on the page No. 6
SAFETY HAZARD INTENSITY LEVEL The following symbols are used throughout this guide as indicated in their descriptions: There are three levels of hazard intensity identified by signal words -WARNING and CAUTION and FOR SAFETY. The level of hazard intensity is determined by the following definitions: WARNING - Hazards or unsafe practices which could result in severe personal injury or death. ! WARNING CAUTION - Hazards or unsafe practices which could result in minor persona
Summary of the content on the page No. 7
SAFETY THIS PRODUCT IS FOR COMMERCIAL USE ONLY. ELECTRICAL In the USA, this machine operates on a standard 15 amp 120V, 60 hz, A.C. power circuit. The amp, hertz, and voltage are listed on the data label found on each machine. Using voltages above or below those indicated on the data label will cause serious damage to the motors. EXTENSION CORDS If an extension cord is used, the wire size must be at least one size larger than the power cord on the ! WARNING machine
Summary of the content on the page No. 8
SAFETY SAFETY LABEL LOCATION The following WARNING LABEL(S) are found on your cleaning unit. These labels point out important Warnings and Cautions which should be followed at all times. Failure to follow warnings and cautions could result in fatality, personal injury to yourself and/or others, or property damage. Follow these instructions carefully! DO NOT remove these labels. NOTE: If at any time the labels become illegible, promptly replace them. WARNING LABEL PART NUMBER 8
Summary of the content on the page No. 9
OPERATIONS TECHNICAL SPECIFICATIONS 120V ITEM DIMENSION/CAPACITY Electrical 120V Nominal Power 0.5 HP Rated Amperage 7 Amps Brush Width 17 – 16.5” (430 - 420 mm) Brush RPM 470 RPM Wheels 3 inches (75 mm) non-marking grey Dimensions - Weight 48 lbs. (22 kg) - Weight - Deluxe 56 lbs. (25 kg) Dimensions – Height with handle 45.5” (1.16 m) Dimensions – Depth 16 inches (0.4 m) Power Cord 40 feet (12.2 m) Solution Tank Volume - Deluxe 2 gallon Pump
Summary of the content on the page No. 10
OPERATIONS HOW THE MACHINES WORK 4. No dwell time is required. Do not allow chemical to dry before brushing. The Carpet Maintainer is designed to maintain your carpet using the Quick Dry Carpet Care System. By 5. Brush treated area to emulsify soils using using the Carpet Maintainer in conjunction with the Windsor iCapsol or other carpet- iCapsol or Prochem ProCaps chemical solution, you brushing machine. can perform a regular light cleaning and grooming of your carpe
Summary of the content on the page No. 11
OPERATIONS MACHINE OPERATION PRE-RUN INSPECTION Perform a pre-run inspection to find possible STARTING MACHINE – DELUXE problems that could cause poor performance or NOTE: Perform pre-run machine check before lost time from breakdown. Check the rating plate operating machine. to confirm voltage and frequency is the same as FOR SAFETY: Before starting machine, make the power supply. NOTE: A 10% variation in sure that all covers are in place and secured voltage is a
Summary of the content on the page No. 12
OPERATIONS SHUT-DOWN AND STORAGE TRANSPORTING A SPRAYER 1. Flush the spray jet and tank with hot water 1. This machine has the capability to mount a (Deluxe only) small pump-up sprayer. 2. After flushing, uncouple quick disconnect to TRANSPORTING CHEMICAL - DELUXE prevent water from dripping out of front jet. 1. This machine has the capability to mount 3. a. Press red button to power off machine chemical bottles or trigger sprayers to the 1
Summary of the content on the page No. 13
COMPONENTS 8 2 1A 1A 2 1B 1B 5 4 4 6 3 3 7 iCapsol Mini Deluxe iCapsol Mini 5. Tank 1A. Stop Switch (red-120V only) 6. Strainer 1B. On/Off Switch (black-230 only) 7. Jet 2. Start Switch (green) 8. Spray Pump Switch 3. Brushes 4. Handle Release 86269870 07/11/07 3-5
Summary of the content on the page No. 14
MAINTENANCE BRUSH CLEANING AND MAINTENANCE DAILY MAINTENANCE After each session of carpet cleaning, the brushes 1. Clean and inspect brushes. and the brush housing should be cleaned. Before cleaning or changing the brushes, always unplug the 2. Clean and inspect brush housing, debris tray machine from the power supply. and machine. Rinse debris tray if needed. Brushes are removed without tools. After handle is 3. Inspect power cord for wear or damage. in locked position, til
Summary of the content on the page No. 15
MAINTENANCE MACHINE TROUBLESHOOTING PROBLEM CAUSE SOLUTION No power to machine Tripped electrical circuit Check building circuit breaker breaker in fuse box of building Faulty power cord Replace power cord Power switch failure or relay Replace power switch or failure relay Tripped circuit breaker Reset circuit breaker. Higher amp draw may indicate faulty parts. Find parts not moving freely and correct as needed. Internal wiring problem With machine unplugged, check for
Summary of the content on the page No. 16
BRUSH 3 6 5 4 3 7 2 1 8 86269870 01/02/08 5-1
Summary of the content on the page No. 17
BRUSH SERIAL NO. REF PART NO. PRV NO. QTY DESCRIPTION NOTES: FROM 1 86217340 270130 1 COVER, BELT, RIGHT 2 86172630 57314 2 NUT, M4, LK, SST 3 86172870 70898 6 SCR, M4X14, PHMS, DIN7985 SST 4 86224670 730396 2 SPRING, BRUSH CLIP 5 86214850 12544 2 ASSY, BRUSH & HUB 6 86217330 270129 1 COVER, BELT, LEFT 7 86216070 12535 2 ASSY, BRUSH DRIVE 8 86172840 70886 6 SCR, M5X10, PHS, FHD, SST 86269870 01/02/08 5-2
Summary of the content on the page No. 18
BRUSH LIFT 1 2 3 4 5 6 86269870 04/02/07 5-3
Summary of the content on the page No. 19
BRUSH LIFT SERIAL NO. REF PART NO. PRV NO. QTY DESCRIPTION NOTES: FROM 1 86215580 141042 2 BRACKET, CROSSOVER PUSH 2 86172700 67606 4 RING, E-TYPE, 5MM ID, DIN6799 3 86215750 09156 4 BRG, FLNG, 6MM IDX7MM LONG 4 86224760 73997 4 SPRING, COM, 18.28 OD X 25L 5 86215740 09155 4 BRG, FLNG, 6MM IDX24MM LONG 6 86223620 67605 2 ROD, LIFTING 86269870 04/02/07 5-4
Summary of the content on the page No. 20
DECAL 1 2A 2B 86269870 01/02/08 5-5
