Shindaiwa PowerBroom X7502891200 user manual

User manual for the device Shindaiwa PowerBroom X7502891200

Device: Shindaiwa PowerBroom X7502891200
Category: Vacuum Cleaner
Manufacturer: Shindaiwa
Size: 2.04 MB
Added : 10/3/2013
Number of pages: 24
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Shindaiwa PowerBroom X7502891200. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Shindaiwa PowerBroom X7502891200.

For your convenience

If looking through the Shindaiwa PowerBroom X7502891200 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Shindaiwa PowerBroom X7502891200 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Shindaiwa PowerBroom X7502891200 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Shindaiwa PowerBroom X7502891200 User manual - Online PDF
Advertisement
« Page 1 of 24 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Shindaiwa PowerBroom X7502891200 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Shindaiwa PowerBroom X7502891200. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

Shindaiwa O wnER’S/OPERa TOR’S ManU aL
TM
PS344 PowerBroom
Minimize the risk of injury to yourself and others! Read this
manual and familiarize yourself with the contents. Always wear
eye and hearing protection when operating this unit.
WARNING!
X7502891200
07/10

Summary of the content on the page No. 2

introduction iMPORTanT! WARNING! The Shindaiwa PS344 PowerBroom is The information contained in these designed and built to deliver superior The engine exhaust from instructions describes units available at performance and reliability without this product contains chemicals compromise to quality, comfort, safety the time of publication. known to the State of California or durability. to cause cancer, birth defects, or Shindaiwa engines represent the other reproductive harm. Echo, Inc.

Summary of the content on the page No. 3

Safety WARNING! WARNING! Work Safely Never operate A PowerBroom operates at very high speeds Never make unauthorized power equipment of any kind if you and has the potential to do serious damage attachment installations. are tired or if you are under the influ- if misused, abused or mishandled. To reduce ence of alcohol, drugs, medication or the risk of injury, you must maintain control at Stay Alert any other substance that could affect all times, and observe all safety precautions yo

Summary of the content on the page No. 4

Safety (continued) The Properly Equipped Operator Always protect yourself from hazards such as thorny brush and flying debris Always wear eye and hearing protection. by wearing gloves and close fitting Shindaiwa recommends wearing a face shield as clothing that covers arms and legs. additional face and eye protection. Never wear shorts. Don’t wear loose clothing or items such as jewelry that could get caught in machinery or under brush. Secure long hair so it is above shoulder level.

Summary of the content on the page No. 5

Product description Spark Plug Using the illustration as a guide, famil- iarize yourself with your machine and its PS344 various components. Understanding your Grip machine helps ensure top performance, Ignition Switch long service life and safer operation. Handle Fuel Tank Outer Tube Tank Protector Sweeper Belt Throttle Gearcase Trigger Sweeper Drum WARNING! Do not make unauthorized modifications or alterations to any of these units or their components. Specifica tions Model PS344 Dry W

Summary of the content on the page No. 6

Emission Control (Exhaust & Evaporative) EPA 2010 and Later and/or C.A.R.B. TIER III The emission control system for the engine is EM/TWC (Engine Modification and 3-way Catalyst) and for the fuel tank the Control System is EVAP (Evaporative Emissions) or N (for nylon tank). Evaporative emission may be applicable to California models only. An Emission Control Label is located on the unit. (This is an EXAMPLE ONLY; information on label varies by en- gine FAMILY). PRODUCT EMISSION DURABILITY (

Summary of the content on the page No. 7

assembly (continued) Adjust Throttle Trigger Free Play Loosen the air cleaner cover knobs The throttle trigger free play should be approximately 3/16-1/4 inch (4-6 mm). Make sure that the throttle trigger operates smoothly without binding. If it becomes necessary to adjust the trig- ger free play, follow the procedures and illustrations that follow. Cable 1. Loosen the air cleaner cover knobs Adjuster and remove the air cleaner cover. Lock Nut 2. Loosen the lock nut on the cable adju

Summary of the content on the page No. 8

assembly (continued) 1. Push one of the drum axles onto 2. Use a clevis pin and hitch pin to either of the two gearcase output secure the drum axle to the shaft. shafts. If necessary, rotate the drum The PowerBroom tool should now be 3. Slide the recessed end of a axle until the clevis pin hole in the completely assembled. sweeper drum assembly over the axle aligns with the matching hole installed axle, and then push the in the gearcase output shaft. drum down the axle until the cotter

Summary of the content on the page No. 9

Handling Fuel DANGER Fuel is VERY flammable. Use extreme care when mixing, storing or handling or serious personal injury may result. • Use an approved fuel container. • DO NOT smoke near fuel. • DO NOT allow flames or sparks near fuel. • Fuel tanks/cans may be under pressure. Always loosen fuel caps slowly allowing pressure to equalize. • NEVER refuel a unit when the engine is HOT or RUNNING! • DO NOT fill fuel tanks indoors. ALWAYS fill fuel tanks outdoors over bare ground. • DO NOT

Summary of the content on the page No. 10

Starting the Engine iMPORTanT Engine ignition is controlled by a two position switch mounted on the throttle housing labeled, “I” for ON or START and “O” for OFF or STOP. WARNING! The attachment will operate immediately when the engine starts and could result in possible serious injury. Keep mov- able parts of the attachment away from objects that could become entangled or thrown, and surfaces that could cause loss of control. WARNING! Never start the engine from the operating positi

Summary of the content on the page No. 11

Starting the Engine (continued) When the Engine Starts... ■ After the engine starts, allow the ■ Advancing the throttle makes the If the engine does not start engine to warm up at idle 2 or 3 attachment move faster; releasing ■ Repeat the appropriate starting pro- minutes before operating the unit. the throttle permits the attachment cedure for a cold or warm engine. to stop moving. If the attachment ■ If the engine does not continue to continues to move when the engine ■ If the engine s

Summary of the content on the page No. 12

Operating Break-in and Operation Once broken in, a PowerBroom will The PowerBroom works best when its WARNING! effortlessly move an amazing variety of rubber fins can quickly slide or “skim” BURN DANGER! The gear- materials, ranging from snow or stand- over the surface being swept. New or case will become very hot during ing water to heavier objects such as replacement sweeper belts tend to grip normal operation. gravel or wood chips. or drag on hard surfaces, and should be thoroughly

Summary of the content on the page No. 13

Maintenance iMPORTanT! WARNING! Air Filter MAINTENANCE, REPLACEMENT OR The H4 engine that powers your Before performing any REPAIR OF EMISSION CONTROL Shindaiwa model is a hybrid 4-stroke maintenance, repair, or cleaning work DEVICES AND SYSTEMS MAY BE engine. As a hybrid, the engine is on the unit, make sure the engine and PERFORMED BY ANY REPAIR ESTAB- lubricated by oil mixed with the gaso- cutting attachment are completely LISHMENT OR INDIVIDUAL; HOW- line and air from the carbureto

Summary of the content on the page No. 14

Maintenance (continued) 10/15-Hour Maintenance Remove and clean or replace the spark plug. ■ Adjust the spark plug electrode gap to 0.024 inch (0.6 mm). If the spark 0.024 inch plug must be replaced, use only an (0.6 mm) NGK CMR5H or equivalent resistor type spark plug of the correct heat range. CaUTiOn! Before removing the spark plug, Clean the spark plug clean the area around the plug to and check the gap at prevent dirt and debris from getting the electrode. into the e

Summary of the content on the page No. 15

Maintenance (continued) 135 hour maintenance (cont.) Valve Adjustment 1. Remove cylinder cover, rocker arm cover, and spark plug. Rotate the crankshaft while observing the piston through the spark plug opening. When the piston is at the top of the compression stroke (TDC), the valves can be adjusted. CaUTiOn! ■ Performing a valve adjustment 2. Loosen adjuster locknut so that the 6. Turn engine over several times, incorrectly may cause hard 2.5 mm Allen socket head adjustment and return to

Summary of the content on the page No. 16

Maintenance (continued) Muffler Maintenance If the engine becomes sluggish and low on power, check and clean the spark arrester screen. Engine Cover WARNING! Engine Cover Never operate the unit Screws with a damaged or missing muffler or spark arrester! Operating with a missing or damaged spark arrester is a fire hazard and could also dam- age your hearing. 1. With a 3 mm hex wrench remove Muffler the 3 engine cover screws and the Muffler Gasket engine cover. 2. With a 4 mm hex wrench,

Summary of the content on the page No. 17

adjusting Engine idle The engine must return to idle speed Idle Speed Adjustment whenever the throttle trigger is 1. Place the unit on the ground, then released. Idle speed is adjustable, start the engine, and then allow it to and must be set low enough to per- idle 2-3 minutes until warm. mit the engine clutch to disengage the 2. If the attachment rotates when the attachment. engine is at idle, reduce the idle speed by turning the idle adjusting screw counter-clockwise. WARNING! 3. If

Summary of the content on the page No. 18

Troubleshooting Guide EnGinE dOES nOT STaRT OR haRd TO STaRT Remedy Possible Cause What To Check Let cool completely and restart. Engine hot/heat soaked. Vaporlock. Refi ll with fresh, clean unleaded gasoline with a pump octane Low fuel quality. of 89 or higher mixed with an air cooled engine oil that meets or exceeds ISO-L-EGD and/or JASO FD classifi ed oils at 50:1 gasoline/oil ratio. Valve adjustment. Consult with an authorized Shindaiwa Valve clearance too tight. servicing dealer. Adjust va

Summary of the content on the page No. 19

Troubleshooting Guide (continued) Troubleshooting Guide (continued) addiTiOnaL PROBLEMS LOw POwER OUTPUT Possible Cause Remedy Symptom Clogged air fi lter. Clean the air fi lter. What To Check Remedy Possible Cause Poor acceleration. Operator is overworking the unit. Use a lower throttle setting. Clogged fuel fi lter. Replace the fuel fi lter. Is the engine overheating? Carburetor mixture is too lean. Consult with an authorized Shindaiwa Lean fuel/air mixture. Consult with an authorized Shindaiwa se

Summary of the content on the page No. 20

Troubleshooting Guide (continued) Troubleshooting Guide (continued) addiTiOnaL PROBLEMS LOw POwER OUTPUT Possible Cause Remedy Symptom Clogged air fi lter. Clean the air fi lter. What To Check Possible Cause Remedy Poor acceleration. Operator is overworking the unit. Use a lower throttle setting. Clogged fuel fi lter. Replace the fuel fi lter. Is the engine overheating? Carburetor mixture is too lean. Consult with an authorized Shindaiwa Lean fuel/air mixture. Consult with an authorized Shindaiwa se


Alternative user manuals
# User manual Category Download
1 Shindaiwa PowerBroom PB2500 User manual Vacuum Cleaner 0
2 Shindaiwa 82052 User manual Vacuum Cleaner 0
3 Shindaiwa PowerBroom 80732 User manual Vacuum Cleaner 0
4 Shindaiwa PowerBroom PS344 User manual Vacuum Cleaner 5
5 Shindaiwa PowerBroom X7502891100 User manual Vacuum Cleaner 0
6 Shindaiwa PowerBroom X7502235300 User manual Vacuum Cleaner 0
7 Shindaiwa SV212 User manual Vacuum Cleaner 1
8 Shindaiwa PowerBroom PB270 User manual Vacuum Cleaner 7
9 Edelbrock 2263 User manual Vacuum Cleaner 0
10 ACS XFC-S User manual Vacuum Cleaner 9
11 Addtron Technology Standard And High Speed Floor Machine P201 User manual Vacuum Cleaner 2
12 AEG ELECTROLUX 460 User manual Vacuum Cleaner 72
13 AEG VAMPYR 825I User manual Vacuum Cleaner 162
14 AEG VAMPYR 731I User manual Vacuum Cleaner 102
15 AEG SMART 301 User manual Vacuum Cleaner 14