Summary of the content on the page No. 1
OWNER’S MANUAL
For Household Use Only
10
Summary of the content on the page No. 2
TABLE OF CONTENTS Technical Details 2 Important Safety Instructions 3 Special SEBO Product Features 4 S-Class Filtration 4 Bag Full or Clog Warning – Auto Shut-Off 4 AIRBELT Shock Absorber 4 Identification of Parts 5 Assembly 5 Optional Attachments 5 Standard Attachments 5 Operating Instructions 6 Starting the Machine 6 Suction Control 6 Operating the Machine 6 Additional Operating Instructions for K3 with Power Head 7 Starting the Machine and Suction Control 7 Operating the Machine 7 Using the
Summary of the content on the page No. 3
IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE ! When using an electrical appliance, basic precautions must always be followed. To reduce the risk of electric shock, this vacuum cleaner has a polarized plug; one blade is wider than the other. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the p
Summary of the content on the page No. 4
S u p e r q u i e t a i r e x SPECIAL SEBO PRODUCT FEATURES Your SEBO AIRBELT K canister vacuum is among the most technically advanced vacuum cleaners in the world. Some of its unique features are: • S-Class Filtration. Certified by leading Allergy foundations in Europe, the AIRBELT K vacuum provides the user with S-Class filtration of 99.9% of particles to 0.3 microns. This is accomplished by the SEBO three-step filtration system. First, the three-layer full-size filter bag (a) collects the v
Summary of the content on the page No. 5
IDENTIFICATION OF PARTS 1. Handle grip 14. Exhaust filter cover 1 2. Power control slider (K3 only) 15. AIRBELT shock absorber 2 3. Handle release button 16. Carrying handle 12 4. Telescopic tube 17. Suction opening 5. Slide button 18. Hose release button (K3 only) 3 6. Power cable 19. Hose neck 13 7. Tool release button 20. Crevice nozzle 8. Kombi nozzle 21. Parking attachment holder 4 9. On/Off power control knob 22. Power cable shroud 10. Warning light 23. AIRBELT clip 11. Upholstery Nozzle 2
Summary of the content on the page No. 6
OPERATING INSTRUCTIONS ALL K VACUUMS Starting The Machine - Figures 1, 2 & 3 22 Before turning on your canister, make sure that you have a firm hold on the handle grip to keep the machine from moving forward. 1. With the canister main power control knob (9) in the OFF position, grasp the plug and pull the power cord (6) out from the power cable recess (22). The power cord (6) should be unwound from the cable reel at least two thirds of its length. Note: do not over-extend the cord. 6 2. Plug
Summary of the content on the page No. 7
0 max. ADDITIONAL OPERATING INSTRUCTIONS FOR K3 WITH POWER HEAD Please refer to your power head owner’s manual for more information Starting The Machine and Suction Control - Figures 1, 2, 8, 9, 10a & 10b Before turning on your canister, make sure that the vacuum handle is in its upright locked position (figure 8). 1. With the canister main power control knob (9) in the OFF position, and the power control slider on the handle (#2, figure 9) in the OFF position, pull the power cord 40 out from
Summary of the content on the page No. 8
Using the Telescopic Tube, Hose & Attachments - Figures 11 & 12 The telescopic tube (4) is useful for vacuuming corners and hard-to-reach areas. You may 4 use the telescopic tube without a brush, power head or attachment. To remove a brush or power head, switch off the power control knob (9) and unplug the vacuum. Then, press the 7 tool release button (7) and pull the tube out. The crevice nozzle (20) and dusting brush (28) may be inserted onto the end of the tube. To use the upholstery nozzle (
Summary of the content on the page No. 9
VACUUM MAINTENANCE Always unplug vacuum from outlet 25 ! before dismantling any part of machine! Changing the Filter Bag - Figure 16 45 To change the filter bag (45), set the canister upright (as shown in figure 13), press the cover release catch (25) and lower the filter bag cover (26). Grasp the green filter bag sealing plate (46), slide the plate from the holder (48) and push the filter bag cap (47) on to seal the bag. Slide the sealing plate (46) of 26 a new bag into the bag holder slots (48
Summary of the content on the page No. 10
CLOG REMOVAL Always unplug vacuum from outlet before removing ! any clogs! NOTE! K3 users with ET-H or ET-1 power heads, please refer to your power head 3 user’s manual for more detailed instructions for removing clogs in your power head. If the “bag full or clog” warning light (10) remains illuminated after the filter bag 4 has been changed and the filters are in good condition, there is likely a clog in the system. Clogs in the Head or Brush - Figure 20 Clogs in the swivel neck (57) of a head
Summary of the content on the page No. 11
TROUBLE-SHOOTING GUIDE Always unplug vacuum from outlet before dismantling any part of the machine! ! PROBLEM REASON SOLUTION Does not turn on 1. Telescopic tube not inserted properly. 1. See page 5. 2. Not plugged into working outlet. 2. Use another outlet. 3. Cable worn. 3. Replace cable. 4. K3: The power control slider 4. K3: Set slider switch to “on” switch is set to “0” (“off” position). position. See page 7. Bag full or clog light on 1. Bag full. 1. Replace filter bag. See page 9. Bag ful
Summary of the content on the page No. 12
AIRBELT K2 SCHEMATIC AND PARTS LIST Canister with Handle/Hose # 9678 AM K2 (Volcano) # 9674 AM K2 (Denim Blue) # 9679 AM K2 (Midnight Blue) # 9696 AM K2 (Hunter Green) Volcano Machine Pos. Part # Description 1 6600 DG Bottom casing (Old style -Use castor 6682 DG) 6754 DG Bottom casing (New style -Includes castors 6751 DG) 2 6675 DG Suction neck-New (6676 DG Old) 3 6014 Seal 4 6042 WS Spring lock 5 6681 HG Bag holder, cpl. 6 6696 AM K Micro-Filter & Exhaust Set 7 6678 DG Bag cover
Summary of the content on the page No. 13
AIRBELT K3 SCHEMATIC AND PARTS LIST Canister with Handle/Hose # 9681 AM K3 (Red) # 9684 AM K3 (Volcano) Red Machine Pos. Part # Description 1 6600 DG Bottom casing (Old style -Use castor 6682 DG) 6754 DG Bottom casing (New style -Includes castors 6751 DG) 2 6677 DG Suction neck 3 6014 Seal 4 6042 WS Spring lock 5 6681 HG Bag holder, cpl. 6 6696 AM K Micro-Filter & Exhaust Set 7 6678 DG Bag cover, cpl. (Old style - Use castor 6682 DG) 6756 DG Bag cover, cpl. (New style -Includes castor 67
Summary of the content on the page No. 14
SEBO VACUUM CLEANER WARRANTY Five Years Non-Wear Parts - Five Years Motor - One Year Labor 1. Your authorized SEBO dealer or SEBO will provide the filters, the cable (external cord), the attachment hose, original product purchaser with replacement of Non- the brush rollers, the front bottom plate, the rear Wear Parts which fail due to a material or workman- bottom plate, the telescopic tube, the crevice nozzle, ship defect for a period of five (5) years from the orig- the upholstery nozzle, t
