Summary of the content on the page No. 1
Free Combination Multi-split Type
Room Air Conditioner
AE122BCAAA
Contents
(H2EM-18H03)
Before Use
Operation Points--------------------------1
Name of Parts ----------------------2-3
Safety Precautions---------------------4-5
Operation Instruction
Fan Operation-----------------------------6
Auto, Cooling, Dehumidifying,
Heating Operation---------------------7
Timer On/Off Function---------------8
Timer On-Off Function --------------9
Sleep Function-----------------------10
User's Attentions-----
Summary of the content on the page No. 2
Operation points Operation of air conditioner Anti-cold air blowing out During Heating operation, after starting When the ambient humidity is too high, in the unit, the indoor fan motor will not COOLING or DEHUMIDIFYING mode, rotate immediately to prevent cold air from there may be water dropped in the air outlet. blowing out. Please wait ? Defrosting function 3-minute protection function During Heating operation, when frost formed If start the unit immediately only after it is on the heat excha
Summary of the content on the page No. 3
Name of Parts Indoor unit Fan Motor Electric box Air outlet grille Evaporator Drain pan Wire controller Mode Fan Speed Swing AUTO Temperature Clock Set Timer Sleep ** ** Aux. Heat Fileter Reset Reset ON/OFF 2
Summary of the content on the page No. 4
Summary of the content on the page No. 5
Safety Precautions Before starting the unit, please read the following ìSafety Precautionsî carefully to guarantee the normal operation of the system. The following lists two kinds of safety precautions ìWarningî and ìNoticeî. For the items that the improper use may cause death or serious injury are listed in ìWarningî volume. However, sometimes the items listed in ìNoticeî volume may also cause serious accidents. So, these two volumes are the important contents related to safety, they must be o
Summary of the content on the page No. 6
Safety Precautions Notice The system should never be used for Do not put or use any spray Do not put the fire devices in any other purposes than intended such near the air conditioner, and the places, which the air from as for preservation of food, flora and do not directly spray to the the air conditioner can directly fauna, precision devices or work of air conditioner. blow. art. Otherwise it may cause It may cause the fire devices It may cause deterioration of the articles. fire. cannot burn
Summary of the content on the page No. 7
Operation instruction Fan operation Turn on the unit 1 Press the ON/OFF button to turn on the unit The LCD display of the wire Fan Speed Swing Mode 2 controller will show the previous Temperature 3 working state (except for Timer, Sleep, Swing mode), the operation indicator Clock Set light on the wire controller will light up. Sleep Timer 2 Choose of working mode Aux.HeatFileter Reset Press MODE button, each press the working Reset mode will change as the following sequence: 4 AUTO COOLING
Summary of the content on the page No. 8
then choose AUTO, COOLING, DEHUMID IFYING, HEATING operation.
Summary of the content on the page No. 9
Operation instruction Timer On/Off function Before using TIMER function, calibrate the clock first (referring to page 3). When you wake up in the morning, before going back to home after work or after going to bed, you can let your air conditioner automatically turn on or turn off. 1. Turn on the unit After turning on the unit, set the desired working mode. The LCD of the wire controller will show working mode. (except for Timer, Sleep, Swing) Mode Fan Speed Swing Temperature 2. Set of TIMER mo
Summary of the content on the page No. 10
Operation instruction Timer On-Off function 1.After turning on the unit, set the proper working mode The LCD of the wire controller ** ** ** will show working mode. (except for Timer, Sleep, Swing) ** 2. Set of TIMER mode ** ** Press the TIMER button to change the TIMER ** ** ** 6 mode, each press the TIMER mode will change as the following sequence: 5 ** **** ** ON OFF ON OFF AM AM PM PM **/** Then choose the TIMER ON-OFF mode. At this time the ON will flash. 3. Set the TIMER ON time Press th
Summary of the content on the page No. 11
Sleep operation Operation instruction Before going to bed, you can press the SLEEP button, the air conditioner will operate in comfort sleep mode to make you have a sound sleep. Before using this function, you should calibrate the clock first, otherwise, the SLEEP function will be out of order. Use of SLEEP function After turning on the unit, setting the working mode, then press SLEEP button to make the air conditioner have the previous Sleep time (powered on for the first time or after performi
Summary of the content on the page No. 12
Usersí Attention If do not use the air conditioner for a Do not press tightly with the LCD part of long time, it is necessary to cut off the wire controller to avoid damage of it. power.If do not cut off power, the unit Set proper room temperature may consume power. In order to protect Not too low or high and make every the unit, before using people in the room feel comfortable. the air conditioner Cut off again, turning on Heating power the power at least Cooling 18-23* 26-28* 12 hours in adva
Summary of the content on the page No. 13
Maintenance When maintaining, do turn off the manual power switch. Daily cleaning Clean air conditioner and wire controller Use soft cloth to dry clean If there is too much dirt on the air conditioner panel, please soak the cloth with water, and then clean it. (The wire controller cannot use water to clean, it should use dry cloth to clean.) It is forbidden to use gasoline, diluent, eradicator powder and chemical dishcloth etc. to clean, otherwise it may cause deformation and crack. Maintenanc
Summary of the content on the page No. 14
Troubleshooting Before as the special repair center for help, please check the following items of the air conditioner Symptom Cause The water flow sound when operation starts; during operation and shortly Hear the sound of after operation stops, in 2-3 minutes shortly after the operation starts, water flow sometimes the sound becomes louder. This is the sound of refrigerant flow and the draining sound of condensate water. In DEHUMIDIFYING, In DEHUMIDIFYING operation, when the room temperature is
Summary of the content on the page No. 15
When Troubles Occur Before installing, do read this ìSafety precautionsî carefully to guarantee theproper installation. The below attentive matters are divided into ì Warningî and ì Noteî two parts. When the wrong installation occur, it is very possible death and severe injury and other serious accidents will happen. For those items are listed in ì Warningî part. But even the items listed in ì Noteî part can also cause serious accidents. Above all,both the two parts are very impo
Summary of the content on the page No. 16
Installation instruction Notice This manual can not include all kinds of conditions, if you have new requirements and questions, please contact with local Haier Sales Center. Warning Before installing the unit, please read this manual carefully. Improper installati on may cause accidents and make unit damage or death. Installation tools 1. Screwdriver 2. Steel saw 3. 60mm 70mm diameter drill 4. Spanner (diameter 17,27mm) 5. Spanner (14, 17, 19, 27mm)
Summary of the content on the page No. 17
Installation instruction 1. Installation of Duct 1)Duct material Type Material Structural characteristic Main use Normal thin steel Good processing performance and structural hardness Good anticorrosive performance Generally used in ventilation duct system Galvanize steel Storm protection system in Good processing performance, corrosion resistant, Aluminum orits alloy ventilation engineering uneasily sparkle Stainless steel Anti-corrosive ventilation Anticorrosive, acid-resistant engineering in
Summary of the content on the page No. 18
Installation procedure Install indoor unit Notice ! Do not install the air conditioner at the place where the combustible gas maybe leak. In case of the leaked gas gather around the unit, it may cause fire accident. The indoor unit should be installed in the place where the cool air and warm air may evenly circulate. Avoid the following places: Place with too much salinity (coastal area). Place with too much sulfuration gas (mainly is the hotspring area, the copper pipe and brazed part are easil
Summary of the content on the page No. 19
Summary of the content on the page No. 20
Installation procedure Install indoor unit When install the duct hidden type indoor unit, the return air box must be designed and installed, as Figure 1, Figure 2. The distance between the air outlet of duct and the air outlet of air conditioner should be no more than 1m (when the out unit static pressure is 0Pa). Low static pressure duct type: max static pressure is 30Pa. Building roof of installation *1m A Ceiling (Figure 1) Unit Return air box Air out duct Return air Air supply Air ourlet gir
