QSC Audio K8 YOKE user manual

Summary of the content on the page No. 1

K8 YOKE
K Series Loudspeaker Accessory
User Manual
Yoke spacer — 2 components
M5 x 25 mm screw with thread locking patch — 4 components
Steel yoke bracket – side 1 — 1 component
Steel yoke bracket – side 2 — 1 component
M5 x 16 mm screw — 2 components
M5 split lock washer — 2 components
M5 flat washer — 2 components
M5 nut — 2 components
M8 x 25 mm screw — 2 components
M8 split lock washer — 2 components
M8 flat washer — 2 components
This yoke mount is specifically for mounting the QSC K8 loud

Summary of the content on the page No. 2

Attaching the Yoke to the Loudspeaker: Horizontal Mounting The yoke bracket is designed to attach to the rigging points on the loudspeaker for either horizontal or vertical suspension. 1. Attach the yoke spacers using the included M5 screws in the locations shown in (Figure 1). Ensure that the side of the spacer with the text “REAR” shown is oriented toward the rear (amplifier) side of the enclosure. 2. Join the two halves of the yoke mount together with the provided hardware (Figure 2). 3. Att