Summary of the content on the page No. 1
KD Owner’s Manual
BILLY GOAT KD VACUUM
Owner's Manual
KD612, KD512HC, KD512HCS
Accessories Optional Debris bags
ZIPPERLESS
SHREDDER ON BOARD NOZZLE WEAR CASTER KIT STANDARD DEBRIS BAG
QUICK BAG
KIT VACUUM PLATES TURF PRO COVER
HOSE KIT DEBRIS BAG
For non-dusty
Shreds 4"(102mm) x (STD. ON For use on For use in Directs dust
conditions th
Summary of the content on the page No. 2
KD Owner’s Manual ABOUT THIS MANUAL ® THANK YOU for purchasing a BILLY GOAT KD Vacuum. Your new machine has been carefully designed and manufactured to provide years of reliable and productive service. This manual provides complete operating and maintenance instructions that will help to maintain your machine in top running order. Read this manual carefully before assembling, operating, or servicing your equipment. CONTENTS SERIAL PLATE DATA AND SPECIFICATIONS
Summary of the content on the page No. 3
KD Owner’s Manual SERIAL PLATE DATA Record the model number, serial number, date of purchase, and where purchased. Purchase Date: Purchased From: Specifications KD612 KD512HC KD512HCS Engine: HP 6.0 (4.47 kW) 5.5 (4.11 kW) 5.5 (4.11 kW) Engine: Type B & S QUANTUM HONDA OHC HONDA OHC Engine: Model 112K020124E1 GCV160AN1A GCV160AN1A Engine: Fuel Capacity 1.5 qt. (1.4 L) 1.16 qt. (1.1 L) 1.16 qt.
Summary of the content on the page No. 4
KD Owner’s Manual GENERAL SAFETY INSTRUCTIONS and SYMBOLS The safety symbols shown below are used throughout this manual. You should become familiar with them before assembling, operating, or servicing this equipment. This symbol indicates important information that will prevent injury to yourself or others. This symbol indicates ear protection is recommended when operating this equipment. This symbol indicates eye protection is recommended when operating this equipment.
Summary of the content on the page No. 5
KD Owner’s Manual DO NOT run this equipment indoors or in any poorly ventilated area. Refueling outdoors is recommended. DO NOT refuel this equipment while the engine is running. Allow engine to cool for at least two minutes before refueling. DO NOT store gasoline near an open flame. DO NOT remove gas cap while engine is running. DO NOT start or operate engine if strong odor of gasoline is present. DO NOT start or operate engine if gasoline is spilled. Move equipment away from spil
Summary of the content on the page No. 6
KD Owner’s Manual SOUND SOUND LEVEL 97 dB(a) at Operator Position Sound tests were conducted in accordance with 2000/14/EEC, and were performed on 2-21-2002 under the conditions listed below. Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on the unit for the sound power level for your model. General Conditions:
Summary of the content on the page No. 7
KD Owner’s Manual INSTRUCTION LABELS ® The labels shown below were installed on your BILLY GOAT KD Vacuum. If any labels are damaged or missing, replace them before operating this equipment. Item numbers from the Illustrated Parts List and part numbers are provided for convenience in ordering replacement labels. The correct position for each label may be determined by referring to the Figure and Item numbers shown. LABEL DANGER KEEP HANDS LABEL EA
Summary of the content on the page No. 8
KD Owner’s Manual PACKING CHECKLIST Your Billy Goat KD Vacuum is shipped from the factory in one carton, completely assembled except for the upper handle, debris bag, and bag quick disconnect. READ all safety instructions before assembling unit. TAKE CAUTION when removing the unit from the box the Handle Assembly is attached by cables and folded over PUT OIL IN ENGINE BEFORE STARTING PARTS BAG & LITERATURE ASSY Warranty card P/N- 400972, Owner’s Manual P/N-
Summary of the content on the page No. 9
KD Owner’s Manual OPERATION Like all mechanical tools, reasonable care must be used when operating machine. Inspect machine work area and machine before operating. Make sure that all operators of this equipment are trained in general machine use and safety. PUT OIL IN ENGINE BEFORE STARTING STARTING ENGINE: See engine manufacturer’s instructions for type and amount of oil and gasoline used. Engine must be level when checking and filling oil and gasoline.
Summary of the content on the page No. 10
KD Owner’s Manual OPERATION VACUUMING OPERATION VACUUM NOZZLE HEIGHT ADJUSTMENT: is raised and lowered by pulling slightly upward on handle and pulling height adjust knob on the handle (item 23) up at left rear of machine. FOR MAXIMUM PICKUP: Adjust nozzle close to debris, but without blocking airflow into the nozzle. NOTE: Never bury nozzle into debris. CLEARING A CLOGGED NOZZLE & EXHAUST: Turn engine off and wait for impeller to stop completely and disconnect spark
Summary of the content on the page No. 11
KD Owner’s Manual MAINTENANCE PERIODIC MAINTENANCE Periodic maintenance should be performed at the following intervals: Maintenance Operation Every Use (daily) Every 5 hrs (daily) Every 25 Hours Inspect for loose, worn or damaged parts. Clean Debris bag Check bag strap tightness Engine (See Engine Manual) Check for excessive vibration Lubricate wheels IMPELLER REMOVAL 1.Wait for engine to cool and disconnect spark plug. 2.Drain fuel and
Summary of the content on the page No. 12
KD Owner’s Manual Troubleshooting P roblem P ossible C ause S olution A bnorm al vibration. · Loose or out of balance im peller or · C heck im peller and replace if required. loose engine C heck engine W ill not vacuum or has poor · dirty debris bag. N ozzle height set too · C lean debris bag. S hake bag clean or vacuum perform ance high or low . H ose kit cap m issing. w ash. A djust nozzle height. C heck for C logged nozzle or exhaust. E xcessive hose kit cap. U nclog nozzle o
Summary of the content on the page No. 13
KD Owner’s Manual MAINTENANCE RECORD Date Service Performed Part No 890033 Form No F062306A 13
Summary of the content on the page No. 14
KD Owner’s Manual PARTS DRAWING KD Part No 890033 Form No F062306A 14
Summary of the content on the page No. 15
KD Owner’s Manual PARTS LIST IT E M K D 612 K D 512H C K D 512H C S D E S C R IP T IO N Q T Y Q T Y Q T Y N O . P art N o . P art N o . P art N o . 1 P R O D E B R IS B A G (service) 890305 1 890023 1 890023 1 * Denotes 2 standard 3 hardware item that 4 N U T LO C K (1/4 - 20 ) *8160001 7 *8160001 7 *8160001 7 may be 5 S C R E W C A P ( 1/4 - 20 x 1-1/2 H E X ) *8041008 8 *8041008 8 *8041008 8 purchase 6 H A N D LE A S S ’Y (incl. item s 4(5),5(5),11(2),75(2),76) 900054 1 90
Summary of the content on the page No. 16
KD Owner’s Manual BRUSH CUTTER FORCE BLOWER AERATOR If you liked this product please feel free to view our full line of quality lawn care, renovation, and debris removal products at www.billygoat.com QL VACUUM MULTI VACUUM POWER RAKE Part No 890033 Form No F062306A 16
