Summary of the content on the page No. 1
2007
4213 Utility
Vehicle
Gasoline
Owner’s Manual
HUV 4213-G
HUV 4213-GXP
Summary of the content on the page No. 2
Summary of the content on the page No. 3
NOTICE The Husqvarna® Limited Two Year Warranty for 2007 Transportation and Utility Vehicles and California Emis- sion Control Warranty Statement appear on the last pages of this manual. No other warranties, express or implied, are contained herein. Please complete and return the warranty registration card included in this man- ual. Husqvarna is not liable for errors in this manual or for incidental or consequential damages that result from the use of the material in this manual. This manual con
Summary of the content on the page No. 4
FOREWORD Thank you for choosing Husqvarna, a world leader in outdoor products. You have chosen the finest utility vehicle on the market. Please protect your investment and ensure that your Husqvarna vehicle provides years of reliable, superior performance by reading and following the maintenance instructions in this manual. Your comfort and safety are important to us, so we urge you to read and follow the step-by-step operating instructions and safety precautions in this manual. These instructio
Summary of the content on the page No. 5
TABLE OF CONTENTS Vehicle Feature Identification .................................................................................................................... 4 Safety Details ............................................................................................................................................ 7 General Warnings ...................................................................................................................................... 8 Model Identification
Summary of the content on the page No. 6
Vehicle Feature Identification HUV4213-G DIFFERENTIAL LOCK CONTROL DECAL OPERATING DRIVER/PASSENGER WARNING INSTRUCTIONS DECAL DECAL KEY SWITCH BED LOAD WARNING DECAL UNDERAGE WARNING DECAL FUEL SHUT-OFF VALVE (ON TOP OF LAMP FUEL TANK) SWITCH FUEL GAUGE/ HOUR METER LOW OIL WARNING SERIAL LAMP NUMBER CRUSH AREA DECAL ROTATING PARTS BRAKE DECAL BED PEDAL (TOP OF PASSENGER SIDE FENDER) LATCH ACCELERATOR PEDAL (UNDER SEAT VEHICLE LOADING DECAL SUPPORT) Page 4 2007 HUV4213 Gasoline Vehicle Ow
Summary of the content on the page No. 7
Vehicle Feature Identification HUV4213-G BED LATCH GASOLINE WARNING DECAL WARNING DECAL CHOKE (ON PASSENGER SIDE SEAT SUPPORT) PARK BRAKE (DOTTED LINE) FORWARD/REVERSE HANDLE TRAILER HITCH DECAL (ON FRONT AND REAR RECEIVER HITCHES) ROTATING PARTS AND RECEIVER HOT MANIFOLD DECAL HITCH (SHOWN WITH OPTIONAL TUBE BUMPER) WINCH CABLE WARNING DECAL (FOR VEHICLES WITH WINCH ACCESSORY) (ON STARTER/GENERATOR AND ENGINE) DIODE (ON SEAT SUPPORT PANEL) WIRING DECAL (ON FRAME ABOVE DIODE) FRAME GROUND AN
Summary of the content on the page No. 8
HUV4213-GXP DIFFERENTIAL LOCK CONTROL DECAL OPERATING DRIVER/PASSENGER WARNING INSTRUCTIONS DECAL DECAL KEY SWITCH BED LOAD WARNING DECAL UNDERAGE WARNING DECAL FUEL SHUT-OFF VALVE (ON TOP OF LAMP FUEL TANK) SWITCH FUEL GAUGE/ HOUR METER LOW OIL WARNING SERIAL LAMP NUMBER CRUSH AREA DECAL ROTATING PARTS BRAKE DECAL BED PEDAL (TOP OF PASSENGER SIDE FENDER) LATCH ACCELERATOR PEDAL (UNDER SEAT VEHICLE LOADING DECAL SUPPORT) Page 6 2007 HUV4213 Gasoline Vehicle Owner’s Manual
Summary of the content on the page No. 9
HUV4213-GXP BED LATCH GASOLINE WARNING DECAL WARNING DECAL CHOKE (ON PASSENGER SIDE SEAT SUPPORT) PARK BRAKE (DOTTED LINE) FORWARD/REVERSE HANDLE TRAILER HITCH DECAL (ON FRONT AND REAR RECEIVER HITCHES) ROTATING PARTS AND HOT MANIFOLD DECAL RECEIVER HITCH WINCH CABLE WARNING DECAL (FOR VEHICLES WITH WINCH ACCESSORY) (ON STARTER/GENERATOR AND ENGINE) DIODE (ON SEAT SUPPORT PANEL) WIRING DECAL (ON FRAME ABOVE DIODE) FRAME GROUND AND GOVERNOR WARNING DECAL (ON FRAME) 2007 HUV4213 Gasoline Vehi
Summary of the content on the page No. 10
Practice Safety WARNING ! Rotating Parts Safety signs like you see above may at first seem shocking, but their impact is mild compared with the reality of severe personal injury. Your safety and satisfaction are of the utmost importance to Husqvarna. That is why before operating the vehicle, we urge you to review the information in this manual. Understand and become familiar with the DANGER, WARNING and CAUTION statements and procedures it contains, along with the safety decals that are affi
Summary of the content on the page No. 11
FRONT OF VEHICLE Safety Details SAFETY DETAILS ý WARNING • This owner’s manual should be read completely before attempting to drive or service the vehicle. Failure to follow the instructions in this manual could result in property damage, severe personal injury, or death. It is important to note that some vital statements throughout this manual and on the decals affixed to the vehi- cle are preceded by the words DANGER, WARNING, or CAUTION. For your protection, we recommend that you take special
Summary of the content on the page No. 12
General Warnings GENERAL WARNINGS The following safety statements must be heeded whenever the vehicle is being operated, repaired, or ser- viced. Vehicle feature identification information is also included beginning on page 4. Other specific safety statements appear throughout this manual and on the vehicle. ý DANGER • Battery – Explosive gases! Do not smoke. Keep sparks and flames away from the vehicle and service area. Ventilate when charging or operating vehicle in an enclosed area. Wear a fu
Summary of the content on the page No. 13
Model Identification ý WARNING • Frame ground – Do not allow tools or other metal objects to contact frame when disconnecting battery cables or other electrical wiring. Do not allow a positive wire to touch the vehicle frame, engine, or any other metal component. • Wear safety glasses or approved eye protection when servicing the vehicle. Wear a full face shield and rubber gloves when working on or near batteries. • Do not wear loose clothing or jewelry such as rings, watches, chains, etc., when
Summary of the content on the page No. 14
Controls and Indicators CONTROLS AND INDICATORS See General Warnings on page 10. ý WARNING • Before allowing anyone to drive the vehicle, make sure the driver is familiar with all controls and operating procedures. • Do not tamper with the governor. Doing so will void the warranty, as well as damage the engine and other components, and could result in property damage, personal injury, or death due to unsafe speeds. • Do not shift the Forward/Reverse handle while the vehicle is in motion. • Engin
Summary of the content on the page No. 15
Controls and Indicators CAUTION • Do not “rev” the engine for long periods of time while the Forward/Reverse handle is in the NEUTRAL position. Failure to heed this caution could result in damage to the unitized transaxle. • Do not shift the Forward/Reverse handle while the accelerator pedal is pressed. Shift the handle only when the vehicle is at a complete stop. Failure to heed this caution could result in damage to the unitized transaxle. NOTE: The key can be removed only when the key switch
Summary of the content on the page No. 16
Controls and Indicators BRAKE PEDAL The brake pedal is the large pedal on the left with the word STOP molded into it (Figure 5). To slow or stop the vehicle, press the brake pedal (Figure 6). Figure 5 Accelerator and Brake Pedal Figure 6 Brake Pedal PARK BRAKE The park brake handle is located between the driver and passenger seats. To engage the park brake, first apply pressure to the brake pedal, and then pull up on the park brake handle until handle latches into place. To disengage, pull
Summary of the content on the page No. 17
Controls and Indicators DIFFERENTIAL LOCK ý WARNING • With the differential lock engaged, vehicle turning functions are greatly reduced. To prevent loss of vehicle control when differential lock is engaged, do not operate vehicle at speeds greater than half throttle and use caution when attempting to turn the vehicle. • Disengage differential lock on paved surfaces. The differential lock is used to provide better traction at the rear wheels when necessary. Engaging the differ- ential lock will t
Summary of the content on the page No. 18
Seat Latch and Adjustment HEADLAMP CONTROL The headlamp control is located on the instrument panel between the fuel gauge/hour meter and steering col- umn. Pull the headlamp control knob out to turn the headlamps on and push the knob in to turn the headlamps off. NOTE: Using the headlamps for extended periods of time without the engine running, or with the engine idling, will discharge the battery. LAMP BAR CONTROL The lamp bar control is a toggle switch located on the instrument panel above an
Summary of the content on the page No. 19
Performance Inspection • Fuel: Check fuel level. See Fueling Instructions on page 33. Check fuel tank, lines, fuel cap, pump, fuel filters, and carburetor for fuel leakage on a daily basis. • Exhaust system: Check for leaks. • Hydraulic brakes: Check fluid level. See Master Cylinder on page 29. PERFORMANCE INSPECTION After you have familiarized yourself with the vehicle controls and have read and understood the driving instructions, take the vehicle for a test drive. Use the following checklist
Summary of the content on the page No. 20
Driving Instructions DRIVING INSTRUCTIONS ý WARNING • Only licensed drivers should be allowed to drive this vehicle. • Before allowing anyone to drive the vehicle, make sure the driver is familiar with all controls and operating procedures. • No one under the age of 16 years should be allowed to drive the vehicle. • No more than one person per bucket seat at one time, or two persons per bench seat. • Do not allow riders in the cargo bed. • For night use, the vehicle must be equipped with headlam
