Summary of the content on the page No. 1
MANUEL D’UTILISATION - BEDIENUNGSANLEITUNG - MANUALE DI UTILIZZAZIONE - USER MANUAL
MANUAL DE UTILIZACIÓN - GEBRUIKSAANWIJZING - BRUKSANVISNING
BETJENINGSVEJLEDNING - FOLHETO DE UTILIZAÇÃO
M 3615FT
Summary of the content on the page No. 2
Recommendations and Precautions 1.Operation Please read the following instructions carefully and follow them closely, they concern your personal safety and can affect the operation of your equipment. Television sets require ventilation to avoid overheating which can damage components. Make sure that the rear ventilation openings are not covered up by curtains, cloths, newspapers, etc. There must be enough room inside built–in units to allow cooling air to circulate freely. Do not install the set
Summary of the content on the page No. 3
Connections 220 - 240V ~ 50Hz GB 2
Summary of the content on the page No. 4
1. Aerial Socket Enables connection of the aerial and, if required, a video recorder (see manual for latter). To tune the channel reserved for your video recorder, start up the recorder then carry out MANUAL CHANNEL SETTING operations. Store at programme 99 if you have a SECAM video recorder or at any programme ending with a 9 (9,19,29, etc.) if you have a PAL recorder. Each time you use the video recorder, switch to the channel assigned to it. 2. SCART Socket GB This is used to connect: – a VHS
Summary of the content on the page No. 5
Remote Control Stand-by Display programme No. and sleep timer (Yellow button) Inactive Display Timer Menu (Green button) Call upTeletext/Fastext (pur- GB Call up personal ple key) adjustments (Red button) Adjustment: move to Right/Left in menus and select one of the proposed options Confirm anactionor validate a menu option To go to Picture and Channel Adjustment menus To leaveamenu Move Up and Down in the menus Volume level To change programme Sound mute 8 To switch to connected Direct access t
Summary of the content on the page No. 6
Automatic Channel Setting This set is equipped with an automatic search system which will search for and store all channels available in your region. To help identify the programmes, we suggest that you have to hand a TV guide or daily newspaper. Ensure that the aerial lead is connected to the TV set. Check that any equipment connected only via the aerial (video recorder or satellite equipment) is operating. GB Switch off any equipment connected via the SCART socket. Searching for stations depen
Summary of the content on the page No. 7
Changing a Programme Number Select the channel number to be changed using the button. AUTO INSTALL. Using the numerical keypad on the remote control, enter the EURO VL new programme number. PR01 You can also use the buttons on the remote control. GB Press the button to confirm the change. The programmes stored under the old and new numbers are then swapped. Repeat this operation to change other programme numbers. Erasing a Programme Select the programme to be erased using the button. Enter 0 or
Summary of the content on the page No. 8
Manual Channel Setting Press the button twice to call up the channel setting menu. 1. Selecting the Broadcasting Standard Select the broadcasting standard using the buttons. EURO FR UK VL PR GB EURO Western Europe, Tunisia, Morocco (B,G standards) FR France, Luxembourg (L,L’ standards) UK United Kingdom, Ireland (I standard) 2. Channel Search Select the 2nd line of the menu using the button. Start the search by pressing: – the button for a forward search, – the button for a backward search. EURO
Summary of the content on the page No. 9
. 4. Fine Tuning Only necessary in the event of interference If fine tuning is necessary, select the 3rd line of the menu using the button. EURO VL If necessary, adjust the picture using the buttons. PR GB Select the 4th line (PR)using the button to allocate a programme number to the channel and store it in memory (see Programme Number and Storing in Memory) If a channel has required fine tuning, it will be stored in memory with the AFC (Automatic Frequency Control) deactivated. Press the button
Summary of the content on the page No. 10
Picture Adjustments Press the button to call up the Picture Menu. = = = = = BRIGHTNESS COLOUR CONTRAST SHARPNESS TINT GB Select the function to be adjusted using the buttons. The tint function is only active in NTSC mode. Adjust as required using the buttons. Storing Personal Adjustments You can store the adjustments you have just made and call them up at a later stage. Caution: these personal adjustments will replace and delete the standard settings made at the factory. With the Picture Menu di
Summary of the content on the page No. 11
Day to Day Operation Switching On - Selecting Programmes Switch on the television set using the main ON/OFF switch if the indicator is off. If it is on, enter the desired programme number. For programmes 1 to 9: Press the corresponding number on the remote control. GB For programmes 10 to 99 (e.g. 24) : Press and hold the decimal (tens) number (2):2- then press the units (4) number briefly:24 Volume Adjustment - Sound Mute Press the buttons to turn the sound up or down. Press the button to turn
Summary of the content on the page No. 12
Teletext Press the purple button to call up the Index page (page 100). Page Selection Enter the number of the desired page (this must have 3 digits) using the numerical keys on the remote control – E.g. for page 170, enter 1, 7, 0. As soon as the page has been found, it is displayed on the screen. GB Press the button to call the next page. Press the button to call the last page. When a teletext page is displayed, you can switch off the sound using the button or adjust the volume using the button
Summary of the content on the page No. 13
THOMSON multimedia 46/47 Quai A. Le Gallo 92648 Boulogne Cedex France RCS Nanterre B 322019464 209 196 70
