Summary of the content on the page No. 1
Generic Pioneer Charter OCAP.fm Page 1 Friday, July 20, 2007 1:28 PM
C4000 and S4000
Universal Remote Controls
Users Guide
PREPROGRAMMED FOR YOUR SET-TOP BOX
Summary of the content on the page No. 2
Generic Pioneer Charter OCAP.fm Page 2 Friday, July 20, 2007 1:28 PM TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Key Charts: C4000 and S4000 Remote Controls . . . . . . . . . . . 6 Device Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Installing Batteries . . . . . . .
Summary of the content on the page No. 3
Generic Pioneer Charter OCAP.fm Page 3 Friday, July 20, 2007 1:28 PM INTRODUCTION The C4000 and S4000 Remote Controls by Universal Electronics are our latest generation universal remote controls. Their sophisticated technology allows you to consolidate up to five of your original home entertainment remote controls into one easy-to-use product. Moreover, they are packed with advanced features such as: • Preprogrammed control to operate the cable converter or sattelite receiver supplied
Summary of the content on the page No. 4
Generic Pioneer Charter OCAP.fm Page 4 Friday, July 20, 2007 1:28 PM FEATURES AND FUNCTIONS Use the illustrations below to locate features on the C4000 and S4000 Remote Controls and then study the Key Charts (on the next three pages) to learn how they function. To find out what type of devices can be controlled by each device key after programming, see “Device Table” on page 9 . C4000 Remote Control www.urcsupport.com 4
Summary of the content on the page No. 5
Generic Pioneer Charter OCAP.fm Page 5 Friday, July 20, 2007 1:28 PM S4000 Remote Control www.urcsupport.com 5
Summary of the content on the page No. 6
Generic Pioneer Charter OCAP.fm Page 6 Friday, July 20, 2007 1:28 PM Key Charts: C4000 and S4000 Remote Controls Key Function Use SYSTEM ON/OFF to control the Master Power macro. For MASTER POWER control, see “Using the System On/Off Key” on page 19. Use SET UP for all programming sequences. Press PWR once to turn on or off a home entertainment device. For MASTER POWER control, see “Using the System On/Off Key” on page 19. Press AUX, DVD, TV, CBL, or STB once to select a home ente
Summary of the content on the page No. 7
Generic Pioneer Charter OCAP.fm Page 7 Friday, July 20, 2007 1:28 PM Key Function Use A, B, C, or D to access additional cable features (see your set-top box’s manual). Use VOL+ (or VOL-) to raise (or lower) the audio volume. Use FAV to cycle through your favorite channels stored in your set-top box. Use CH+ (or CH-) to select the next higher (or lower) channel. For DVD players, use these keys to skip forward (or reverse) through chapters. For amplifiers/receivers, use these keys
Summary of the content on the page No. 8
Generic Pioneer Charter OCAP.fm Page 8 Friday, July 20, 2007 1:28 PM Key Function Press ASPECT once to change the aspect ratio of the show you are watching. (Not available on all set-top boxes). Use PIP ON-OFF to switch the Picture- In-Picture feature on or off (if available on your TV or cable service). Use PIP SWAP to switch images and sound between the main and window pictures (if available on your TV or cable service). Use PIP MOVE to move the window picture to different positio
Summary of the content on the page No. 9
Generic Pioneer Charter OCAP.fm Page 9 Friday, July 20, 2007 1:28 PM Device Table NOTE: Please refer to the table below when performing the instructions in “Programming Device Control” on page 10 or “Setting Up a Combo Unit” on page 11. After programming, the C4000 and S4000 Remote Controls will be able to control the following types of devices: Device Key Controls these types of devices Television, DVD, VCR, PVR, Audio Receiver, Audio Tuner, Audio Amplifier, Cable Box, Satellite Re
Summary of the content on the page No. 10
Generic Pioneer Charter OCAP.fm Page 10 Friday, July 20, 2007 1:28 PM 2. Locate the two (2) enclosed AA batteries. Match the + and - marks with those in the battery case, then insert them. 3. Align the cover’s keys with the case’s holes and press the cover back into place. The tab should click when the cover is locked. 4. Test the remote control by pressing any mode key (e.g., TV). If the batteries are inserted correctly, the LED (red light) blinks once. NOTE: When batteries need repla
Summary of the content on the page No. 11
Generic Pioneer Charter OCAP.fm Page 11 Friday, July 20, 2007 1:28 PM NOTE: If the selected mode key emits a long blink, the entry is invalid. Repeat steps 2 through 3 and try entering the same code again. 4. Aim the remote control at the device and press PWR once. The device should turn off. If it does not, repeat steps 2 through 3, trying each code for your brand until you find one that works. If it still does not respond, try searching for the code (see “Searching for Your Code”
Summary of the content on the page No. 12
Generic Pioneer Charter OCAP.fm Page 12 Friday, July 20, 2007 1:28 PM 1. For a TV/DVD Combo, turn on your TV/DVD Combo and insert a DVD. (For a TV/VCR Combo, insert a videocassette). 2. On the remote control, press DVD once; it blinks once. Then press and hold SET UP until the DVD key blinks twice. 3. Use the “Manufacturer’s Codes” starting on page 24 to locate the brand name and enter the first five-digit code for your combo device (for example, TV/VCR). If you perform this procedu
Summary of the content on the page No. 13
Generic Pioneer Charter OCAP.fm Page 13 Friday, July 20, 2007 1:28 PM NOTE: Use the following device code digits to control a specific device: 0 = Cable/STB 1 = TV 2 = DVD/VCR 3 = Audio For example, to search for a code for your TV: 1. Turn on your TV. 2. On the remote control, press TV once; it blinks once. Then press and hold SET UP until the TV key blinks twice. 3. Enter 9 9 1. The TV key blinks twice. 4. Press 1 (the device code digit for your TV). The TV key blinks twice. Aim th
Summary of the content on the page No. 14
Generic Pioneer Charter OCAP.fm Page 14 Friday, July 20, 2007 1:28 PM For example, to find out which code is operating your TV: 1. On the remote control, press TV once; it blinks once. Then press and hold SET UP until the TV key blinks twice. 2. Enter 9 9 0. The TV key blinks twice. 3. To view the code for the first digit, press 1 once. Count the number of times the TV key blinks (e.g., 3 blinks = 3) and write down the number in the leftmost TV Code box on page 11. NOTE: If a code dig
Summary of the content on the page No. 15
Generic Pioneer Charter OCAP.fm Page 15 Friday, July 20, 2007 1:28 PM PROGRAMMING CHANNEL CONTROL LOCK By default, the remote control’s channel-control capabilities are locked to the cable converter. The * affected keys are 1 through 0, CH+, CH-, and LAST. This guarantees that you do not inadvertently change a channel on your TV or VCR. However, you can de- activate this feature to allow full access to these keys in the TV and VCR modes. Unlocking Channel Control 1. On the remote contr
Summary of the content on the page No. 16
Generic Pioneer Charter OCAP.fm Page 16 Friday, July 20, 2007 1:28 PM DVD, TV or CBL mode. You can perform Individual Volume Unlock on a selected device to set its volume control for independent operation. Unlocking Volume Control for a Single Device (Individual Volume Unlock) 1. Assuming Global Volume Lock is active, select a mode on the remote control that you want to unlock (e.g., CBL) and press it once. Next, press and hold SET UP until the device key blinks twice. 2. Enter 9 9
Summary of the content on the page No. 17
Generic Pioneer Charter OCAP.fm Page 17 Friday, July 20, 2007 1:28 PM Locking Volume Control To One Mode (Global Volume Lock) 1. On the remote control, press and hold SET UP until the last-selected device key blinks twice. 2. Enter 9 9 3. The last-selected device key blinks twice. 3. Select a mode (e.g., TV or AUX) which you want to use to control the volume. The selected device key blinks twice. Now, when you press VOL+, VOL-,or MUTE, the volume of the selected device (e.g., TV) is co
Summary of the content on the page No. 18
Generic Pioneer Charter OCAP.fm Page 18 Friday, July 20, 2007 1:28 PM 6. Enter 9 8 2. The CBL (or STB) key blinks twice, indicating ID Lock is again locked. PROGRAMMING THE ON DEMAND MACRO KEY The C4000 and S4000 Remote Controls includes one macro key (the ON DEMAND key). The ON DEMAND key allows you to set up key macros to activate certain keys in a specific order. For example, you can set up a key macro to change the channels on your TV, raise or lower the volume, and start recordi
Summary of the content on the page No. 19
Generic Pioneer Charter OCAP.fm Page 19 Friday, July 20, 2007 1:28 PM Clearing the ON DEMAND Macro Key 1. On the remote control, press CBL (or STB) once; it blinks once. Then press and hold SET UP until the CBL (or STB) key blinks twice. 2. Enter 9 9 5. The CBL (or STB) key blinks twice. 3. Press and release the ON DEMAND key once. 4. Press and hold SET UP. The CBL (or STB) key blinks twice. The ON DEMAND key is now clear and ready for reprogramming (see “Programming the ON DEMAND
Summary of the content on the page No. 20
Generic Pioneer Charter OCAP.fm Page 20 Friday, July 20, 2007 1:28 PM USING KEYMOVER The C4000 and S4000 Remote Controls include a Keymover feature that allows you to map (or copy) keys from one mode (i.e., source mode) to another mode (i.e., destination mode). Programming Keymover For example, if your DVD player does not have volume control, you can map those keys (i.e., VOL+, VOL-, and MUTE) from the TV mode to DVD mode as follows: 1. On the remote control, press CBL (or STB) once; it
