Summary of the content on the page No. 1
ATLAS DVR/PVR 5-DEVICE
Universal Remote Control with Learning
Control Remoto Universal con Aprendizaje
Users Guide
Guía del Usuario
Summary of the content on the page No. 2
TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Key Charts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Device Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 3
INTRODUCTION The Atlas DVR/PVR 5-Device Universal Remote Control with Learning by Universal Electronics is our latest generation universal remote control. Its sophisticated technology allows you to consolidate up to five of your original home entertainment remote controls into one easy-to-use product. Moreover, its packed with advanced features such as: • Preprogrammed control to operate the cable converter supplied by your cable service provider • Dedicated keys to control popular func
Summary of the content on the page No. 4
FEATURES AND FUNCTIONS Use the illustration below to locate features on the Atlas DVR/PVR 5-Device Universal Remote Control with Learning and then study the Key Charts (on the next three pages) to learn how they function. To find out what type of devices can be controlled by each device key after programming, see “Device Table” on page 7 . www.urcsupport.com 4
Summary of the content on the page No. 5
Key Charts Key Function Use SETUP for all programming sequences. Press PWR once to turn on or off a home entertainment device. For MASTER POWER control, see “Using the Master Power Key” on page 20. Press AUX, DVD, AUD, TV, or CBL once to select a home entertainment device to control. Also see “Device Table” on page 7. Each device key has an embedded LED (red light) that blinks upon selection and indicates the remote control is working and (after programming) is sending signals.
Summary of the content on the page No. 6
Key Function Use FAV to cycle through your favorite channels stored in your cable converter. Use CH+ (or CH-) to select the next higher (or lower) channel. For DVD players, use these keys to skip forward (or reverse) through chapters. For amplifiers/receivers, use these keys to select the next higher (or lower) preset station. Press MUTE once to turn the sound off or on. Press LAST once to recall the last channel. Reserved for use as Tune-In keys (see “Programming Tune-In Keys for
Summary of the content on the page No. 7
Key Function Use PIP MOVE to move the window picture to different positions in the main picture. Use PIP CH+ (or CH-) to select the next higher (or lower) PIP channel. In the CBL mode, use VIDEO SOURCE to view other video sources (A or B) instead of cable. In all other modes, use VIDEO SOURCE to watch TV or video programs on a desired device. For amplifiers/receivers, use VIDEO SOURCE to select an input source. Device Table NOTE: Please refer to the table below when performing the in
Summary of the content on the page No. 8
INSTALLING BATTERIES ❶ ❷ ❸ 1. On the back of the remote control, push the tab and lift off the battery cover. 2. Locate the two (2) enclosed AA batteries. Match the + and - marks with those in the battery case, then insert them. 3. Align the covers keys with the cases holes and press the cover back into place. The tab should click when the cover is locked. 4. Test the remote control by pressing any mode key (e.g., TV). If the batteries are inserted correctly, the LED (red light) will bli
Summary of the content on the page No. 9
NOTES: For TV/VCR Combo control, skip this section and perform the instructions on “Program- ming TV/VCR Combo Control” on page 10. Also refer to “Device Table” on page 7 to find out which devices can be programmed onto each device key. If you have another brand of cable converter or a satellite receiver you would like to control, you’ll need to unlock the cable ID Lock before changing the converter code (see “Program- ming ID Lock” on page 18). 1. Turn on a device and, if applicable,
Summary of the content on the page No. 10
DVD Code Device Type:___________________ AUD Code Device Type:___________________ CBL Code Device Type:___________________ TV Code Device Type:___________________ PROGRAMMING TV/VCR COMBO CONTROL If you own a TV/VCR Combo, perform the following instructions to control this device: 1. Turn on your TV/VCR Combo and insert a video cassette. 2. On the remote control, press AUX once; it will blink once. Then press and hold SETUP until the AUX key blinks twice. 3. Use the “Manufacturer’
Summary of the content on the page No. 11
ume control (see “Programming Device Con- trol” starting on page 8). 4. Aim the remote control at your TV/VCR Combo and press PWR once. The device should turn off. If it does not respond, repeat steps 2 through 3, trying each code listed for your brand until you find one that works. If it still does not respond, try searching for the code (“Searching for Your Code” starting on page 11). 5. For future reference, write down each working device code in the boxes below: TV/VCR Code TV Cod
Summary of the content on the page No. 12
6. Press SETUP once to lock in the code. The TV key will blink twice. 7. To search for the codes of your other devices, repeat steps 1 through 5, but substitute the appropriate key (e.g., AUX, DVD, AUD, or CBL) for the device you are searching for. CHECKING THE CODES If you have set up the Atlas DVR/PVR 5-Device Universal Remote Control with Learning by searching for your device code (on the previous page), you may need to find out which four-digit code is operating your equipment. F
Summary of the content on the page No. 13
Learning Precautions • Your original remote controls must be in working order for learning to work properly. • Learned keys are mode-specific, so each one can store a unique function for each mode. • Do not use the following keys for learning: Device Keys, SETUP, Record (•), Tune-In Keys. • Learning capacity is approximately 16 to 25 keys, depending on the code being learned. • Certain device functions are not learnable including multi-frequency types, some high frequency ones, and other
Summary of the content on the page No. 14
4. On the original remote, press and hold the key to be learned. The Atlas DVR/PVR 5-Device Universal Remote Control with Learning’s LED will blink rapidly, then turn off. Continue holding the key on the original remote until the Atlas DVR/PVR 5-Device Universal Remote Control with Learning’s LED blinks twice. NOTE: If the LED displays one long blink, a learning error has occurred. Try repeating this step again until a successful capture occurs. If the function is still not captured,
Summary of the content on the page No. 15
Deleting All Learned Keys in a Specific Mode NOTE: If more than 15 seconds pass between key presses, the remote exits programming. 1. Press and hold SETUP until the last-selected mode key blinks twice, then press 9 7 5. 2. Press a mode key twice (i.e., AUX, DVD, AUD, TV, or CBL) to clear all the learned keys for that mode. The LED blinks twice. 3. Repeat step 2 for another mode or press and hold SETUP to exit programming. PROGRAMMING CHANNEL CONTROL LOCK By default, the remote control’s ch
Summary of the content on the page No. 16
Locking Channel Control to CBL 1. On the remote control, press CBL once; it will blink once. Press and hold SETUP until the CBL key blinks twice. 2. Enter 9 7 3.The CBL key will blink twice. 3. Press CH+ once. The CBL key will blink twice. Now, regardless of what mode you select (except AUD), the channel keys will only change channels on your cable converter. CHANGING VOLUME LOCK Volume Lock allows you to control the volume through the device identified as having your primary speaker(
Summary of the content on the page No. 17
3. Press VOL- once. The last-selected device key will blink four times. 4. Repeat steps 1 through 3 for each device you want volume to be unlocked. Now, after you select a device that has volume unlocked (e.g., CBL), pressing VOL+, VOL-,or MUTE, will control only that device’s volume. Unlocking All Volume Control (Global Volume Unlock) NOTE: Performing these instructions will set inde- pendent volume control for all programmed devices. 1. On the remote control, press and hold SETUP unt
Summary of the content on the page No. 18
PROGRAMMING ID LOCK The Atlas DVR/PVR 5-Device Universal Remote Control with Learning is locked at the factory to operate a Scientific Atlanta cable converter. However, if you have another brand or model of cable converter or satellite service that you would like to control, then you’ll need to perform the following steps to unlock the ID Lock, enter a new manufacturer’s code, and lock the ID Lock again. 1. Turn on the cable converter. 2. On the remote control, press CBL once; it will
Summary of the content on the page No. 19
Programming a Tune-In Key 1. On the remote control, press CBL once; it will blink once. Then press and hold SETUP until the CBL key blinks twice. 2. Enter 9 9 5. The CBL key will blink twice. 3. Select a Tune-In key and press it once. 4. Press CBL once, followed by the channel number to be programmed (e.g., 3 9 for channel 39). NOTE: If you are programming a channel for a Digital Cable Converter, you need to enter all channels in a 3-digit channel format. For example, to program cha
Summary of the content on the page No. 20
USING THE MASTER POWER KEY The Atlas DVR/PVR 5-Device Universal Remote Control with Learning has a unique feature that allows you to sequentially turn up to five of your home entertainment devices on or off with a single key press. NOTE: MASTER POWER (PWR) only works in the CBL mode. If it is not programmed, only the cable converter will turn on or off. In any other mode, pressing MASTER POWER (PWR) once will turn the selected device on or off. Programming the Master Power Key 1. On t
