Summary of the content on the page No. 1
URC-9990
UK
Universal Touch Screen Remote . . . . . . . . . . . . . P.2
D
F
Summary of the content on the page No. 2
User guide p.2 Bedienungsanleitung S.44 Mode d’emploi p.86 ONE FOR ALL MOSAIC URC-9990 DD-0201 701571
Summary of the content on the page No. 3
Table Of Contents INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 INSTALLING BATTERIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 LOW-BATTERY INDICATOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 USING THE TOUCH SCREEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 4
Introduction Your ONE FOR ALL MOSAIC is designed to let you use one remote to operate your Video and Audio equipment; any device designed to be operated by an infrared signal. This also includes those devices which operate over 100 kHz.You can choose any combination of 15 devices you would like to operate. The ONE FOR ALL MOSAIC comes available with the world’s largest and most efficient database of infrared codes for device compatibility. It is further enhanced by ONE FOR ALL’s patented upgrade
Summary of the content on the page No. 5
Using the touch screen MOSAIC features a Touch Screen that responds to touch Setup THEATER commands, whether you use the supplied Stylus or your TV CBL VCR finger tip. Each time you tap on the screen, you’ll see the AV PWR LED blink and hear a beep tone, which serve as visual 1 2 3 and audio confirmation of your command. 4 5 6 7 8 9 -/-- 0 After 20 seconds of inactivity, MOSAIC will turn off the LCD screen to conserve battery life. R URC - 9990 Tap on Current Setup THEATER Setup THEATER next ac
Summary of the content on the page No. 6
Device Setup BY BRAND The easiest way to add devices to MOSAIC is to perform a setup by manufacturer brand. With this method you select a device to add, select the brand you own, and MOSAIC automatically finds the correct manufacturer’s code to correctly control the device. Example: to Set-Up your Video Recorder (brand: Nokia): NOTE: To return to a previous menu, tap on the ESC key. To return to last-displayed Device Screen, press down on ESC or MUTE for at least 2 seconds. For help, tap the ?
Summary of the content on the page No. 7
Tap on BRAND SET Esc OK Esc BRAND SET ? BRAND SET Esc OK Your brand has multiple Would you like to types; use the scroll bars ADD the device or REPLACE Press OK to confirm. to try each one in turn. it with an existing one? CBL VCR VCR Tap on Nokia if 2nd VCR Test VCR 1 PWR VCR 2 ADD VCR 3 VCR 4 1 REPLACE VCR 5 VCR 6 Tap on if 1st VCR BRAND SET Relabel the device? CBL VCR VCR YES NO • To relabel the device key, tap on the YES key and you will see the LABEL Menu (see explanation on page 25 st
Summary of the content on the page No. 8
SETUP BY SEARCH As an alternative method, you can use MOSAIC’s search program to find the correct manufacturer’s codes to set up your entertainment devices. With this method you first select a device you want to add, then you perform a code test, advancing through one or more types, to find the one that works. Example: to use the search method for your television: SEARCH Esc DEVICE SETUP Esc ? Welcome to Device Setup! Select the device. What method would you like to use? Tap on TV CBL SAT BY B
Summary of the content on the page No. 9
SETUP BY CODE Find the code for your device in the Set-Up Code section (starting on page 128). Codes are listed by device type and brand name. The most popular code is listed first. Make sure your device is switched on (not in standby). Newly captured Manufacturer’s codes are available for customer access on our web site www.oneforall.com. 1. Tap on Setup key (upper left corner). 2. Tap on DEVICE SETUP. NOTE: To return to a previous menu, tap on the ESC key. To return to last-displayed Device Sc
Summary of the content on the page No. 10
DELETING A DEVICE If you no longer use a certain device or it has been incorrectly added to the Device Selection Strip, use the following procedure to delete it from MOSAIC’s memory. 1. Tap on Setup key (upper left corner). 2. Tap on DEVICE SETUP. NOTE: To return to a previous menu, tap on the ESC key. To return to last-displayed Device Screen, press and hold down ESC for at least 2 seconds. For help, tap the ? key. 3. Tap on the DELETE key.You will see the DELETE DEVICE Menu which shows the cur
Summary of the content on the page No. 11
NEW CODES NOTE: This section only applies after you have performed a download of new device codes (see SYSTEM – UPGRADE on page 36). NOTE: Make sure the device you want to add is turned on (not in standby). After downloading, MOSAIC will store the new device codes in memory. An additional soft key, labelled NEW CODES, will appear on the DEVICE SETUP Menu which you will use to find a working code for a selected device. 1. Tap on Setup key (upper left corner). 2. Tap on DEVICE SETUP. 3. Tap on the
Summary of the content on the page No. 12
Tap on UPGRADE Esc UPGRADE ? Esc OK Use the scroll bar to try Would you like to each one in turn. ADD the device or REPLACE it with an existing one? Test TV1VCR 2 PWR TV2 ADD TV3 TV4 1 REPLACE TV5 VCR1 VCR2 VCR3 VCR4 VCR5 • Use the ADD key when setting up a new device (e.g., a DVD player) that is not currently on the Device Selection Strip (if needed, refer to USING THE TOUCH SCREEN – on page 4). The remaining instructions assume you will be adding a new device. • Use the REPLACE key when repla
Summary of the content on the page No. 13
Personalization MACROS MOSAIC includes a powerful Macro feature that memorizes and plays back a series of key strokes at any time with the tap of one key. Up to 21 macros can be defined, each containing a maximum of 32 keystrokes. Once defined, a macro must be placed on a Device Screen to be used. MOSAIC allows placement of up to four “global” macro keys across the top of every Device Screen. Also, you may place additional macros in specific Device Screens using empty locations or by overriding
Summary of the content on the page No. 14
1. Tap on Setup key (upper left corner). 2. Tap on PERSONALIZATION. NOTE: To return to a previous menu, tap on the ESC key. To return to last-displayed Device Screen, press down on ESC or MUTE for at least 2 seconds. For help, tap the ? key. 3. Tap on the MACROS key.You will see the MACROS Menu. 4. Tap on the ADD key.You will see the ADD MACROS Menu. 5. Tap on an open Macro key (i.e., a macro key that is not labelled).You will see the ADD MACROS Screen (as shown below) which looks similar to a D
Summary of the content on the page No. 15
7. To save the macro, tap on the OK key.You will see the ADD MACROS Screen (as shown below). Esc ADD MACROS T ADD MACROS Press TEST to check OK the macro, OK to save Relabel the key? or CLEAR to start over. TV CBL VCR DELAY TEST CLEAR YES NO AV PWR 1 2 3 4 5 6 7 8 9 -/-- 0 8. To label the saved macro, tap on the YES key.You will see the ADD MACROS Label Screen. Follow the procedure that is similar to the one starting with step 3 on page 25 to label the macro as TV On and tap the OK key when yo
Summary of the content on the page No. 16
VIEWING MACROS To see what commands are stored in a macro, perform the following steps: 1. On the Device Screen in the upper left corner, tap on Setup.You will see the main SETUP Menu that greets you and asks,“What would you like to configure? ” 2. Tap on the PERSONALIZATION key.You will see the PERSONALIZATION Menu. NOTE: To return to a previous menu, tap on the ESC key. To return to last-displayed Device Screen, press down on ESC or MUTE for at least 2 seconds. For help, tap the ? key. 3. Tap
Summary of the content on the page No. 17
COPYING MACROS To copy a macro, perform the following steps: 1. On the Device Screen in the upper left corner, tap on Setup.You will see the main SETUP Menu that greets you and asks,“What would you like to configure? ” 2. Tap on the PERSONALIZATION key.You will see the PERSONALIZATION Menu. NOTE: To return to a previous menu, tap on the ESC key. To return to last-displayed Device Screen, press down on ESC or MUTE for at least 2 seconds. For help, tap the ? key. 3. Tap on the MACROS key.You will
Summary of the content on the page No. 18
DELETING A MACRO To delete a single macro, perform the following steps: 1. On the Device Screen in the upper left corner, tap on Setup.You will see the main SETUP Menu that greets you and asks,“What would you like to configure? ” 2. Tap on the PERSONALIZATION key.You will see the PERSONALIZATION Menu. NOTE: To return to a previous menu, tap on the ESC key. To return to last-displayed Device Screen, press down on ESC or MUTE for at least 2 seconds. For help, tap the ? key. 3. Tap on the MACROS ke
Summary of the content on the page No. 19
DELETING ALL MACROS To delete all macros, perform the following steps: 1. On the Device Screen in the upper left corner, tap on Setup.You will see the main SETUP Menu that greets you and asks,“What would you like to configure? ” 2. Tap on the PERSONALIZATION key.You will see the PERSONALIZATION Menu. NOTE: To return to a previous menu, tap on the ESC key. To return to last-displayed Device Screen, press down on ESC or MUTE for at least 2 seconds. For help, tap the ? key. 3. Tap on the MACROS key
Summary of the content on the page No. 20
MOVE KEY MOSAIC also includes our patented Key Mover feature that allows keys to be copied from one device to another, or to a different position in the same device mode. However, there are some considerations: • A moved key is actually a copy of the original key. The original key cannot be deleted. • A moved key will always be rectangular, even though the original version may be a different shape. • A moved key retains the original label, but it can be relabelled. • The Key Mover feature only
