JL Audio Stealthbox SB-GM-SLVEXT/10W6v2 user manual

Summary of the content on the page No. 1

®
Stealthbox
INSTALLATION GUIDE START
HERE
for the
6.5”
6.5”
SB-GM-SLVEXT/10W6v2
(1999-2005 Chevrolet Silverado /
GMC Sierra Extended Cab Trucks X
X
with full rear bench seating.) 6.0”
6.0”
(These instructions show for both enclo-
sures. These enclosures are
sold separately )
Passenger’s Side Driver’s Side STEP 3: Thread in the supplied socket cup
set screw into the/each enclosure, leaving
STEP 1: Remove all contents from the rear STEP 1: Remove all contents from the rear
about 1/2” of the tre

Summary of the content on the page No. 2

Cont. From Previous THREADED INSERT Page STEALTHBOX WALL CONGRATULATIONS! INSTALL COMPLETE. ➔➔ VEHICLE SHEET METAL FENDER WASHER SOCKET CUP SET SCREW FLAT WASHER LOCK WASHER HEX NUT STEP 6: Run speaker wire to the/each enclosure STEP 7: Back out the/each socket cup set screw STEP 8: Lower the rear seat and replace all Included Hardware: and attach to the speaker terminal cup. Check the to expose about 1-1/2”. removed contents. 1) 3” x 3’ wax Square woofer(s) for proper operation at this time. 1)