JL Audio Stealthbox SB-GM-TRKEXT/10W1v2/RD user manual

Summary of the content on the page No. 1

SB-GM-TRKEXTP/10W1 Stealthbox™
Fits 1988 - 1998 Extended-Cab
Full-Size GM Pickup Trucks
Installation Guide:
This Stealthbox is a product which requires professional installation skills and tools. Please read this
installation guide thoroughly before beginning the project. It will guide you step by step through the
installation. Several of the steps in this process may require two people to accomplish.
It is absolutely vital that the enclosure be properly mounted to

Summary of the content on the page No. 2

STEP 6: Place the Stealthbox in its mounting location on the floor of the cab. Press down on the enclosure firmly to make an impression on the wax sheet with the head of the mounting bolt. STEP 7: Remove the enclosure. There should be a clear mark where the bolt pressed into the wax square. CAUTION: The mounting hole is near the exhaust system of the vehicle. Make sure that it has had time to cool before proceeding with the following steps. STEP 8: Check under the truck for any loose brak

Summary of the content on the page No. 3

Specifications: Enclosure Type: Acoustic Suspension (Sealed) Driver Type: JL AUDIO 10W1-4 Subwoofer Cont. Power Handling: 125 Watts Nominal Impedance: 4Ω Special Information on using this Stealthbox with its partner enclosure, the SB-GM-TRKEXTD/10W1: Both enclosures are shipped with 4 ohm 10W1 subwoofers. Should you wish to run both to a single ampli- fier, we recommend running them in stereo (one box to each amplifier channel). In some cases, your amplifier may be capable of driving a 2 ohm

Summary of the content on the page No. 4