Summary of the content on the page No. 1
Crestron SMK-6X
Swivel Mount Kit for TPS-6X
Installation Guide
Summary of the content on the page No. 2
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2008 Crestron Electronics, Inc.
Summary of the content on the page No. 3
Crestron SMK-6X Swivel Mount Kit for TPS-6X Contents Swivel Mount Kit for TPS-6X: SMK-6X 1 Introduction ...............................................................................................................................1 Features and Functions................................................................................................1 Specifications ..............................................................................................................1 Physical Desc
Summary of the content on the page No. 4
Summary of the content on the page No. 5
Crestron SMK-6X Swivel Mount Kit for TPS-6X Swivel Mount Kit for TPS-6X: SMK-6X Introduction Features and Functions • Designed for attachment to the TPS-6X-DS desktop docking station • Swivel mount increases security by reducing chance of theft while improving viewing convenience • Base rotates 330 degrees • Mounts on the desktop, in a lectern or on a conference table • Accommodates surface thickness from 3/4 inch (1.91 cm) minimum to 1 3/8 inches (3.50 cm) maximum, using the
Summary of the content on the page No. 6
Swivel Mount Kit for TPS-6X Crestron SMK-6X Physical Description SMK-6X Overall Dimensions 5.80 in (14.74 cm) 6.09 in (15.45 cm) 0.39 in 0.44 in (0.99 cm) (1.11 cm) 2.64 in (6.69 cm) 2 • Swivel Mount Kit for TPS-6X: SMK-6X Installation Guide – DOC. 6577A
Summary of the content on the page No. 7
Crestron SMK-6X Swivel Mount Kit for TPS-6X Setup Supplied Hardware The hardware supplied with the SMK-6X is listed in the following table. Supplied Hardware for the SMK-6X DESCRIPTION PART NUMBER QUANTITY Assembly, Swivel Stop Plate And Screw 4504353 1 Metal, Washer, Keyed, Swivel Stop 4506321 1 Cork/Rubber, Washer, Custom, Swivel 2017614 1 Rubber, Washer, Custom, Swivel 2017615 1 Screw, #08-32 x 3/8”, Steel 2007269 3 Screw, #08-32 x 1/8”, Steel 2017634 2 Washer, Flat, Steel, 7/8-A
Summary of the content on the page No. 8
Swivel Mount Kit for TPS-6X Crestron SMK-6X CAUTION: Use caution when cutting the grommet to prevent damage to the connecting cable. Damage to this cable can result in loss of functionality in the TPS-6X. Preparing the TPS-6X-DS (1 of 2) Rear Cover Remove These Screws Using a 1/16" Allen Wrench Grommet Cable Remove These Phillips Head Screws Using a No.1 Phillips Screwdriver Preparing the TPS-6X-DS (2 of 2) Do Not Remove Rear Cover Cable Blank Grommet Bottom Cutout Boot In Base
Summary of the content on the page No. 9
Crestron SMK-6X Swivel Mount Kit for TPS-6X SMK-6X/TPS-6X-DS Assembly 1. Feed the Connector/Boot and the full length of the cable through the swivel mechanism tube with the cable positioned between one of the guide pins and the rearmost screw hole as shown in the illustration below. 2. Attach and secure the swivel mechanism plate to the TPS-6X-DS using the provided screws. 3. Pull the remaining cable slack down through the swivel mechanism tube. CAUTION: Ensure that the cable is not pi
Summary of the content on the page No. 10
Swivel Mount Kit for TPS-6X Crestron SMK-6X SMK-6X Swivel Mount Kit Installation NOTE: The swivel stop plate has a permanently installed limiting screw to prevent the swivel mechanism plate from spinning continuously in one direction and tangling the cable attached to the TPS-6X-DS. This permanently installed limiting screw must be oriented so it is aligned with the rear of the TPS-6X-DS as shown in the illustration on the following page. 1. Prepare the mounting surface using the templa
Summary of the content on the page No. 11
Crestron SMK-6X Swivel Mount Kit for TPS-6X SMK-6X Swivel Mount Kit Installation Diagram TPS-6X-DS Attached To Swivel Mechanism Plate Front Of TPS-6X-DS Swivel Mechanism Tube Rear Of Slot In Tube TPS-6X-DS Table Or Mounting Surface (Front Edge) Mounting Hole Bottom Side of Table or Mounting Surface Screws (6) #08-8B Mounting Holes (6) In (2017784) Swivel Stop Plate Cork/Rubber Washer Swivel Stop Plate (2017614) (4504353) Keyed Metal Washer Permanently Installed (4506321) Limiting Screw Screws
Summary of the content on the page No. 12
Swivel Mount Kit for TPS-6X Crestron SMK-6X Customize Range Aside from the permanently installed limiting screw attached to the swivel stop plate, two additional limiting screws are provided with your SMK-6X kit. These screws are provided to set a custom range of swivel movement. Refer to the illustrations below for their application. Swivel Stop Plate with Permanent Limiting Screw TAB OF KEYED METAL WASHER STARTS SWIVEL MOTION FROM 90° FRONT OF THE MOUNTING SURFACE 30° 135° SIX LOCATI
Summary of the content on the page No. 13
Crestron SMK-6X Swivel Mount Kit for TPS-6X Resources Industry Compliance As of the date of manufacture, the SMK-6X has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling. Further Inquiries If you cannot locate specific information or have questions after reviewing this guide, please take advantage of Crestron's award winning customer service team by calling Crestron at 1-888-CRESTRON [1-888-273-
Summary of the content on the page No. 14
Swivel Mount Kit for TPS-6X Crestron SMK-6X Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact an authorized CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and pho
Summary of the content on the page No. 15
Crestron SMK-6X Swivel Mount Kit for TPS-6X This page is intentionally left blank. Installation Guide – DOC. 6577A Swivel Mount Kit for TPS-6X: SMK-6X • 11
Summary of the content on the page No. 16
Crestron Electronics, Inc. Installation Guide – DOC. 6577A 15 Volvo Drive Rockleigh, NJ 07647 (2018617) Tel: 888.CRESTRON 07.08 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.
