Summary of the content on the page No. 1
If you need additional operating assistance
after reading this owner's manual or to order
replacement accessories, please call
TOLL FREE : 1-800-968-3429.
Or visit our WEB SITE at
http://www.SylvaniaConsumerElectronics.com
6620LDT (20 inch)
Summary of the content on the page No. 2
PRECAUTIONS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. THIS SYMBOL INDICATES THAT CAUTION DANGEROUS VOLTAGE RISK OF ELECTRIC SHOCK CONSTITUTING A RISK OF ELECTRIC DO NOT OPEN SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE CAUTION: TO REDUCE THE RISK OF ELECTRIC ARE IMPORTANT OPERATING AND SHOCK, DO NOT REMOVE COVER (OR BACK). NO MAINTENANCE INSTRUCTIONS IN THE USER SERVICEABLE PARTS INSIDE. REFER LITERATURE ACCOMP
Summary of the content on the page No. 3
14.Lightning-For added protection for this unit receiver during a b. If liquid has been spilled, or objects have fallen into the unit. lightning storm, or when it is left unattended and unused for c. If the unit has been exposed to rain or water. long periods of time, unplug it from the wall outlet and dis- d. If the unit does not operate normally by following the oper- connect the antenna or cable system. This will prevent damage ating instructions. Adjust only those controls that are cov- to t
Summary of the content on the page No. 4
SUPPLIED ACCESSORIES Remote Control Unit Batteries Owner’s Manual ( NE240UD ) 2 AA Batteries ( 1EMN21900 ) If you need to replace these accessories, please refer to the PART NO. under the illustrations and call our • help line mentioned on the front page. Depending on your antenna system, you may need different types of Combiners (Mixer) or Separators • (Splitter). Contact your local electronics store for these items. LOCATION MOISTURE WARNING For safe operation and satisfactory performance of M
Summary of the content on the page No. 5
TABLE OF CONTENTS PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 SEARCH FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . .21 TRACK SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . .2 TITLE / CHAPTER SEARCH . . . . . . . . . . . . . . . . . . .21 SUPPLIED ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . .4 TIME SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 6
FEATURES TV Mode MTS/SAP Tuner Auto power off system–If there is no air signal input • • from the antenna terminal and no operation for 15 Infrared remote control • minutes, the unit will turn itself off automatically. Trilingual on screen TV setup display available in • Sleep timer–Allows you to have the unit automati- English, Spanish or French • cally turn off at a desired time. 181 channel capability PLL frequency synthesizer • V-CHIP–Enables parents to prevent their children tuner with dire
Summary of the content on the page No. 7
OPERATING CONTROLS AND FUNCTIONS NOTE When you select DVD mode, press [PLAY O O] or [EJECT A] first or insert a disc into the disc slot. • Otherwise, the DVD features are not operated. - REMOTE CONTROL 9.SETUP button (P.12, P.28) Press to enter or exit the setup menu of TV/DVD. 10. TITLE button (P.19) POWER PICTURE SELECT EJECT Press to display the title menu. 1 15 11. CLEAR button (P.21) 2 16 123 Press to clear/cancel a setting currently entered. CH. 17 Press to clear “DISC INSIDE” display. 456
Summary of the content on the page No. 8
26. RETURN button (P.22) 29. REPEAT button (P.23) Press to return to the previous screen in the setup Repeats playback of the current disc, title, menu. chapter, group or track. 27. A-B button (P.23) 30. SUBTITLE button (P.25) Press to repeat the playback of a selected section. Press to select a desired subtitle language. 28. ANGLE button (P.26) Press to change the camera angle to see the sequence being played back from a different angle (if available). - CONTROL PANEL 31. MENU button 31 323334
Summary of the content on the page No. 9
PREPARATION FOR USE ANTENNA/CABLE CONNECTION NOTE Cables used here are commercially available. • For your safety and to avoid damages to the unit, unplug the antenna cable from the ANT jack • before moving the unit. - ANTENNA/CABLE CONNECTION IF YOU HAVE A JACK ON THE WALL Connect the TV to the wall-mounted antenna jack with an RF cable (commercially available). [Rear of this unit] IF YOU HAVE A WIRED CABLE Connect the TV to the wired antenna cable. NOTE Before plugging the antenna into the ANT
Summary of the content on the page No. 10
EXTERNAL CONNECTION You can connect this unit to your own Audio/Video equipment. Be sure to turn off the power to all components in • the system before connecting another component. Refer to the Owner’s Manuals for the equipment AUDIO • to be connected to the unit. VIDEO2 NOTE When you use the external input, select “VIDEO1” or VIDEO1 “VIDEO2” by pressing [SELECT]. (Refer to page 11.) To use the VIDEO1 input jacks, select “VIDEO1”. • To use the VIDEO2 input jacks, select “VIDEO2”. • - VIDEO1 INP
Summary of the content on the page No. 11
TV SECTION TV OPERATION AND SETTINGS INITIAL SET UP WATCHING A TV PROGRAM When you turn on the power for the first time, 1 Press[POWER] to turn on the unit. TV TV the SELECT LANGUAGE screen is displayed. POWER Select the language for screen display and perform auto programming of the channels. NOTE If the TV screen shows snow - HELPFUL HINTS - • 1. PLEASE CHECK TO SEE IF THE 1 After antenna or cable connection is ANTENNA/CABLE/SATELLITE IS noise and there is no operation PROPERLY CONNECTED.
Summary of the content on the page No. 12
ADDING/DELETING CHANNELS CHANNEL SET UP The channels you no longer receive or seldom watch AUTO CHANNEL PROGRAMMING can be deleted from the memory. (Of course, you can As the initial setting, this unit has memorized all add the deleted channel into the memory again.) channels, including the ones not available in your area. This feature automatically puts only available 1 Press [SETUP] then press [K] or [L] to point channels into the memory. to “CHANNEL SET UP”. - TV SET UP - 1 Press [SETUP] then
Summary of the content on the page No. 13
POWER PICTURE SELECT EJECT BACK LIGHT SETTING 1 Press [SETUP] then press [K] or [L] to point 3 789 VOL. SLEEP +100 to “BACK LIGHT”. 0 +10 - TV SET UP - SKIP ZOOM MUTE CHANNEL SET UP V-CHIP SET UP SETUP LANGUAGE [ENGLISH] CAPTION [OFF] B BACK LIGHT [BRIGHT] PLAY REV FWD STOP 2 Press [ENTER] then press [s] or [B] to DISC PAUSE SLOW MENU select to “BRIGHT”, “NORMAL” or “DARK”. DISPLAY ENTER ENTER SETUP TITLE RETURN CLEAR SEARCH MODE REPEAT A-B 3Press [SETUP]. AUDIO SUBTITLE ANGLE MODE SETUP Shaded
Summary of the content on the page No. 14
NOTE CLOSED CAPTION SYSTEM Even if there is a power failure of any • You can view specially labeled (cc) TV programs, kind, the unit will retain its memory for movies, news and pre-recorded tapes with either a this feature. dialogue caption or text display. CAPTION mode: You can watch dramas, movies and news while captioning the dialogues and the contents MTS (Multi-Channel Television of news. Sound) System TEXT mode: You can watch half screen text informa- tion if you want. TO SELECT TV SOUND M
Summary of the content on the page No. 15
A TV RATING SET UP 123 CH. 456 Follow steps to in the V-CHIP SET UP. 1 3 789 4 Press [K] or [L] to select the desired TV rat- VOL. SLEEP +100 ing to be blocked then press [ENTER] repeat- 0 +10 SKIP ZOOM MUTE edly to set “BLOCK” or “VIEW”. B TV–Y [VIEW] TV–Y7 ( ) [VIEW] PLAY TV–G [VIEW] ENTER TV–PG ( ) [VIEW] REV FWD TV–14 ( ) [VIEW] TV–MA ( ) [VIEW] STOP DISC PAUSE SLOW MENU Selection Rating Category Explanations DISPLAY ENTER TV-Y Appropriate for all children SETUP TITLE RETURN TV-Y7 Appropriat
Summary of the content on the page No. 16
Make sure you enter exactly the same new code 6 Press [SETUP] to exit the menu. • SETUP in the “CONFIRM CODE” space as one in the “NEW CODE” space. If they are different, the “NEW CODE” space is cleared for redoing. NOTE 5 Press [SETUP] to exit the menu. To change the rating, the TV must be turned • SETUP to an unprotected program. If “PROTECTED PROGRAM by ...” appears on the screen, please change the channel to a station that is NOTE not protected. Your personal access code will be erased and •
Summary of the content on the page No. 17
DVD SECTION ABOUT THE DISCS PLAYABLE DISCS Playable Recorded Disc size Disc type Mark (logo) Region code discs signals DVD-Video or * 1,2,4,6,10,11 DVD-RW Example DVD-R Title 1 Title 2 Digital video 5 inches * 1,3,4,5, Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2 (MPEG2) (12cm) 6,7,9,10 DVD+RW DVD+R * 1,3,4,5, 6,8,9,10 Audio CD Digital audio * 4,6,10 Audio CD Example 5 inches Track 1 Track 2T Track 3 Track 4 rack 5 Track 6 (12cm) Digital audio MP3 Example CD-RW or Group 1 Group 2
Summary of the content on the page No. 18
PLAYING A DISC POWER PICTURE SELECT EJECT NOTE When the DVD mode has been switched to the • TV mode, the DVD mode shuts down first and 3 then the TV picture and sound appears in about 4 seconds. Similarly, when [POWER] is SKIP ZOOM MUTE pressed to turn off in the DVD mode, this mode shuts down first and then the unit is turned off. “” may appear at the top-right on the TV • PLAY REV FWD screen during operation, warning that a pro- STOP hibited operation has been encountered by the DISC SLOW DVD
Summary of the content on the page No. 19
DISC MENU RESUME 1 Press [DISC MENU]. 1 During playback, press [STOP C]. DISC MENU Resume ON The DVD main menu will appear. • STOP Press ’PLAY’ to play from here. If the feature is not available, symbol may • To play the beginning, press ’STOP’ first and then ’PLAY’. appear on the TV screen. If disc menu is available on the disc, audio lan- • guage, subtitle options, chapters for the title and other options will appear for selection. Resume message will appear on the TV screen. • 2 Press [K], [
Summary of the content on the page No. 20
FAST FORWARD / ZOOM FAST REVERSE The Zoom function allows you to enlarge the video 1 During playback, press [FWD g] or image and to pan through the enlarged image. [REV h]. 1 Press [ZOOM] during playback. REV FWD ZOOM SLOW Playback will continue. • “ g 1” or “h 1” appears on the screen. • 2 Press [ZOOM] repeatedly to select the 2 To select another speed, repeat step 1 until required zoom factor: ZOOM1, ZOOM2, your required speed number appears on the ZOOM3 or OFF. screen. ZOOM For DVDs, fast fo
