Summary of the content on the page No. 1
TFT-LCD TV/DVD Combo
OWNER'S MANUAL
Please READ this manual carefully before
operating your TV, and retain it for future
reference.
MODELS :
A
HLC26
A
HLC32
Summary of the content on the page No. 2
Warning WARNING RISK ELECTRIC SHOCK DO NOT OPEN WARNING : To reduce the risk of electric shock do not remove cover or back. No user-serviceable parts inside refer service to qualified service personnel. Operator Safety has been taken into consideration at the design and manufacture phase, but inappropriate operation may cause electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenanceof th produ
Summary of the content on the page No. 3
Safety Instructions IMPORTANT SAFETY INSTRUCTIONS Read all of the instructions before using this appliance. When using this appliance, always exercise basic safety precautions, including the following: 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer`s instruc
Summary of the content on the page No. 4
Safety Instructions SAVE THESE INSTRUCTIONS Thank you for purchasing the Haier product. This easy-to-use manual will guide you in getting the best use of your product. Remember to record the model and serial number. They are on label in back of the unit. Model number serial number Date of purchase Staple your receipt to your manual. You will need it to obtain warranty service. 4 TV LCD-TFT
Summary of the content on the page No. 5
Introduction Contents Warning . . . . . . . .............. . . . . . . . . . . . . . . . . . . . . . Time Menu 2 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . Date /Time setting................................................ 24 3 Introduction Time zone setting................................................. 25 Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .......... Sleep Timer setting.............................................. 25 6 Connect
Summary of the content on the page No. 6
Label Towards Back Introduction Controls This is a simplified representation of front panel. Here shown may be somewhat different from your TV. Front panel controls A A HLC26 HLC32 AV3 AUDIO Input connect to hear R stereo sound from an AUDIO external device. L AV3 VIDEO Input INPUT 1 VIDEO Connects the video signal CH+ from a video device. 2 CH- Headphone jack VOL+ 3 Headphone audio VOL- output terminal. MENU 4 POWER 5 1.INPUT: Press to show the input source mode.
Summary of the content on the page No. 7
Introduction Connection Options Back panel controls A A HLC26 HLC32 Antenna Input Power Cord Socket Connect cable or This TV operates on AC power. Digital Audio Output S-Video Input antenna signals to The voltage is indicated on the Connect digital audio from Connect S-Video the TV, either directly Specifications page. Never attempt various types of equipment. out from an S-VIDEO or through your to operate the TV on DC power. Note: In standby mode, device to the cable box. these
Summary of the content on the page No. 8
D.CALL EXIT INFO ARC S.MODE Introduction Universal Remote Control The remote control cannot be operated unless the batteries are properly loaded. When using the remote control, aim it at the remote control sensor on the TV. Function introduction TV DVD VCR SETBOX CABLE AUDIO Press the SELECT button repeatedly to select POWER one of the system modes in which the remote Press to turn on and off the TV. control can be used. When the desired device is selected, the corresponding LED lights on 5
Summary of the content on the page No. 9
D. CA LL EXIT INFO ARC S . MO DE Installation External Equipment Connections Accessories SELECT TV/DVD A-B ZOO M TITLE/PBC PROGRAM SLO W R E P E A T S S U U B B T T I T I L T E L E TIME INPUT D . M E N U TFT-LCD TV/DVD Combo CC F R E E Z E OWNER'S MANUAL Please READ this manual carefully before operating your TV, and retain it for future OK reference. CH.LIST SETUP VOL+ CH+ ANGLE SEARCH VOL- CH- M O D E LS : HLC26 A HLC32 A 10+ Q.VIEW Power cable Alkaline b
Summary of the content on the page No. 10
Installation External Equipment Connections NOTE: All cables shown are not included with the TV. Choose Your Connection There are several ways to connect your television, depending on the components you want to connect and the quality of the signal you want to achieve. The following are examples of some different ways to connect your TV with different input sources. VCR connection To avoid picture noise (interference), leave an adequate distance between the VCR and TV Connection Option 1 Set
Summary of the content on the page No. 11
Installation External Equipment Connections External A/V Source Setup How to connect Connect the audio and video cables from the external equipment's output jacks to the TV input jacks, as shown AV IN AUDIO in the figure. When connecting the TV to external equipment, L R Video L R match the jack colors (Video = yellow, Audio Left = white, S-VIDEO ANT IN L R Video L R and Audio Right = red). How to use 1. Select the input sour
Summary of the content on the page No. 12
Installation External Equipment Connections DTV connection This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents (480p,720p, 1080i). How to connect Use the TV`s COMPONENT , PC or HDMI/DVI jack for video connections, de
Summary of the content on the page No. 13
Installation External Equipment Connections PC connection How to connect 1. To get the best picture quality, adjust the PC graphics card to 1024 x768 . 2. Use the TV`s PC or DVI (Digital Visual Interface)Audio IN port for video connections, depending on your PC connector. If the graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of either PC IN or HDMI/DVI IN to display the PC on the TV. If the graphic card on the PC does output analog and
Summary of the content on the page No. 14
Installation HDMI When the source device(DVD player or Set Top Box) supports HDMI How To Connect 1. Connect the source device to HDMI port of this TV with an HDMI cable(not supplied with this product). 2. No separated audio connection is necessary. How To Use If the source device supports Auto HDMI function, the output resolution of the source device will be automatically set to 1280x720p. If the source device does not support Auto HDMI, you need to set the output resolution appropriately. To g
Summary of the content on the page No. 15
Installation Cable sample HDMI Cable (not supplied with the product) HDMI to DVI Cable (not supplied with the product) Analog Audio Cable (Stereo to RCA type) (not supplied with the product) Owner s Manual 15
Summary of the content on the page No. 16
Installation External Equipment Connections Connecting Headphones You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room. AUDIO-R Plug a set of headphones into the 3.5mm mini-jack socket on the side panel of the set. AUDIO-L VIDEO Note Prolonged use of headphones at a high volume may damage your hearing. You will not receive sound from the speakers when you connect headphones to the system. Power sour
Summary of the content on the page No. 17
Installation Take the table stand off You can take off the table stand if you don`t want to use the table stand. A A HLC26 HLC32 Please release the screws 6XM4, see the picture. You can install the TV on the wall. Please release the screws 4XM4, see the picture. Owner s Manual 17
Summary of the content on the page No. 18
Operation Operation In the manual, the OSD (on screen display) may be different from your TV`s, because it is just an example to help you with the TV operation. There are several options you might need to set up in order for your TV to work properly. Read the instructions that follow. Switching On/Off the TV set 1. First, connect power cord correctly. 2. Select the viewing source by using INPUT button on the remote control. 3. When finished using the TV, press the POWER button on the remot
Summary of the content on the page No. 19
Operation Channel menu This TV set has two methods to set channels, which are respectively Auto Scan, Add Channel Scan. In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV set to set channel. Automatic Scan Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the All Channel List. Note The Channel menu will be only operated in normal TV mode. Channel Tuner Antenna Aut
Summary of the content on the page No. 20
Operation Channel menu Add Channel Scan Only search the new channel ,so the old channel will not be cleared. Channel Tuner Antenna Auto Scan 1 Press the MENU button and then select the Channel menu. Video Add Channel Scan 2 Press the or OK button and then use / button to select Rename Audio Tuner. 3 Press the or OK button Select Cable or Antenna mode. Time 4 Press the / button to select Add Channel Scan. Function 5 Press the or OK button to start searching
