Summary of the content on the page No. 1
User's Manual
GT-902
GT-902S
GT-905A
GT-906A15 / GT-906B15
GT-906A60 / GT-906B60
10/100/1000Base-T to 1000Base-SX / LX
Managed Media Converter
Summary of the content on the page No. 2
Trademarks Copyright © PLANET Technology Corp. 2008. Contents subject to which revision without prior notice. PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners. Disclaimer PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and makes no warranty and representation, either implied or expressed, with respect to the quality, performance, merchantability, or fitness fo
Summary of the content on the page No. 3
TABLE OF CONTENTS 1. INTRODUCTION ........................................................................................................................................... 1 1.1 PACKAGE CONTENTS .................................................................................................................................. 1 1.2 HOW TO USE THIS MANUAL......................................................................................................................... 1 1.3 ABOUT TH
Summary of the content on the page No. 4
4.5.3 Q-in-Q VLAN Setting........................................................................................................................ 40 4.6 QUALITY OF SERVICE ................................................................................................................................ 41 4.7 OAM SETUP............................................................................................................................................. 44 4.7.1 Local TS-1000 OAM Setup ...
Summary of the content on the page No. 5
1. INTRODUCTION 1.1 Package Contents Check the contents of your package for following parts: ● Managed Gigabit Ethernet Media Converter x1 ● CD-ROM user's manual x1 ● Quick installation guide x1 ● External DC 5V / 2A power adapter x 1 If any of these are missing or damaged, please contact your dealer immediately, if possible, retain the carton including the original packing material, and use them against to repack the product in case there is a need to return it to us for repair. GT-
Summary of the content on the page No. 6
1.3 About the Managed Media Converter The Managed Media Converter GT-90x provide conversion between 10/100/1000Base-T and 1000Base-SX /LX network. There are SC / LC / WDM connectors and single-mode / multi-mode media for your needs. Ethernet signal that allows two type segments connect easily, efficiently and inexpensively. This Managed Media Converter can be used as a stand-alone unit or as a slide-in module to the PLANET Media Converter Chassis (MC-700, MC-1000 and MC-1500). The Manag
Summary of the content on the page No. 7
1.4 Product Features Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX One-channel media conversion between 10/100/1000Base-T and 1000Base-SX / LX TP port supports 10/100/1000Base-T auto-negotiation and auto-MDI/MDI-X 1000Base-SX: 50/125 μm or 62.5/125 μm multi-mode fiber cable, up to 220/550m on GT-902 1000Base-LX: 9/125 μm single-mode cable provides long distance for 10km on GT-902S 1000Base-LX WDM
Summary of the content on the page No. 8
TS-1000 OAM / IEEE 802.3ah OAM / Loop Back Test 16 TCP / UDP Filter groups Password setting, IP setting and devices description setting through Planet Smart discovery utility Firmware upgrade via remote Web interface External DC5V 2A power supply Compact in size, easy installation LED indicators for easy network diagnosing Reset Button at the front panel for resetting the factory default Choice of fiber-connector from SC, LC, WDM, multi-mode / single-mode fiber /1000B
Summary of the content on the page No. 9
Power Consumption 3.8 Watts/ 13 BTU (maximum) Power Input DC 5V / 2A Dimensions 94 x 70 x 26mm (W x D x H) Operator Environment Operating temperature: 0 to 50 Degree C; Humidity: 5~90% non-condensing Storage Environment storage temperature: -40 to 70 Degree C; Humidity: 5~90% non-condensing Emissions FCC Class A, CE Class A -5-
Summary of the content on the page No. 10
2. HARDWARE DESCRIPTION This product provides three different running speeds – 10Mbps, 100Mbps and 1000Mbps in the same Managed Media Converter and automatically distinguishes the speed of incoming connection. This section describes the functionalities of GT-90X’s components and guides how to install it on the desktop or shelf. Basic knowledge of networking is assumed. Please read this chapter completely before continuing. 2.1 GT-90X Front Panel The Front Panel of the Managed Media Conve
Summary of the content on the page No. 11
2.1.1 LED Indicators LED Color Description PWR Green Lit: When +5VDC power detected. Lit: To indicate the link through that fiber port is successfully established. Fiber LNK/ACT Green Blink: Indicate that the Fiber port is actively sending or receiving data over that port. Lit: To indicate the link through that port is successfully established. TP LNK/ACT Green Blink: Indicate that the port is actively sending or receiving data over that port. Lit: When the port runs in 1000Mbps Ful
Summary of the content on the page No. 12
2.2 Install the Converter This section describes how to install your Managed Media Converter and make connections to the Managed Media Converter. Please read the following topics and perform the procedures in the order being presented. The hardware installation of Managed Media Converter do not need software configuration. To install your Managed Media Converter on a desktop or shelf, simply complete the following steps. 2.2.1 Stand-alone Installation To install a Managed Media Convert
Summary of the content on the page No. 13
Please refers to APPENDIX-A for detailed wiring information of the Managed Media Converter. Notice: To prevent from optic acceptor malfunction, check the both wires / transmitter before power on the converter. GT-905A Installation GT-905A is with high reliability and flexibility to extend the distance from 220m to 120Km. It depends on the Gigabit mini GBIC modules. The SFP transceivers are hot-plug and hot-swappable. You can plug-in and out the transceiver to/from any SFP port witho
Summary of the content on the page No. 14
2.2.2 Chassis Installation and Rack Mounting To install the Managed Media Converter in a 10-inch or 19-inch with standard rack, follow the instructions described below. Step 1: Place your Managed Media Converter on a hard flat surface, with the front panel positioned towards your front side. Step 2: Carefully slide in the module until it is fully and firmly fitted into the slot of the chassis. Figure 2-5: Insert a Managed Media Converter into an available slot Step 3: Attach a rack-
Summary of the content on the page No. 15
Figure 2-6 Mounting the Chassis in a Rack -11-
Summary of the content on the page No. 16
3. MEDIA CONVERTER MANAGEMENT This chapter describes how to manage the Managed Media Converter. Topics include: - Overview - Management methods - Assigning an IP address to the Managed Media Converter - Logging on to the Managed Media Converter 3.1 Overview This chapter gives an overview of Managed Media Converter management. The GT-90X provides a simply WEB browser interface. Using this interface, you can perform various Managed Media Converter configuration and management activit
Summary of the content on the page No. 17
3.2.1 Web Management The PLANET Managed Media Converter provides a built-in browser interface. You can manage the Managed Media Converter remotely by having a remote host with Web browser, such as Microsoft Internet Explorer, Netscape Navigator or Mozilla Firefox. The following shows how to startup the Web Management of the Managed Media Converter, please note the Managed Media Converter is configured through an Ethernet connection, make su
Summary of the content on the page No. 18
3.2.3 PLANET Smart Discovery Utility For easily list the Managed Media Converter in your Ethernet environment, the Planet Smart Discovery Utility from user’s manual CD-ROM is an ideal solution. The following install instructions guiding you for run the Planet Smart Discovery Utility. 1. Deposit the Planet Smart Discovery Utility in administrator PC. 2. Run this utility and the following screen appears. Figure 3-1 Planet Smart Discovery Utility Screen Notice: If there are two LAN
Summary of the content on the page No. 19
3. This utility show all necessary information from the devices, such as MAC Address, Device Name, firmware version, Device IP Subnet address, also can assign new password, IP Subnet address and description for the devices. 4. After setup completed, press “Update Device”, “Update Multi” or “Update All” button to take affect. The meaning of the 3 buttons above are shown as below: Update Device: use current setting on one single device. Update Multi: use current setting on choose mu
Summary of the content on the page No. 20
4. WEB MANAGEMENT The GT-90X Managed Media Converter provide Web interface for management function configuration and make the Managed Media Converter operate more effectively - They can be configured through the Web Browser. A network administrator can manage and monitor the Managed Media Converter from the local LAN. This section indicates how to configure the Managed Media Converter to enable its management function. 4.1 Main Menu After a successful login, the main screen appears, th
