Summary of the content on the page No. 1
USB TO IDE 2.5”+3.5”+SATA Cable RCW605
User Manual
Summary of the content on the page No. 2
USB TO IDE 2.5”+3.5”+SATA Cable RCW605 User Manual USB TO IDE 2.5”+3.5”+SATA Cable Compliance • Compliance with Geni, and Genm of Serial ATA II Electrical Specification .0 • Compliance with USB 2.0 (Hi-Speed) electrical specification • Compliance with USB Mass Storage Class Bulk-Only Transport Specification Specifications • Compliance with Geni of Serial ATA II Electrical Specification .0 • Support SATA Spread-Spectrum Clock • Support SATA II Asynchronous Signal Recovery (Hot Plug) feat
Summary of the content on the page No. 3
USB TO IDE 2.5”+3.5”+SATA Cable RCW605 User Manual Package Contents RCW-605 X User manual X Power adapter X SATA cable X SATA to 4 pin power cable X Drive disc X Installation . Plug the 2.5” or 3.5” ATA/ ATAPI / SATA device to RCW-605 by IDE or SATA interface. (Please notice the direction of IDE or SATA port) Please check a to d as below. (only available in RCW605) SATA 3.5" 2.5" 5.25" a. 3.5" ATA hard drive b. 2.5" ATA hard drive 2.5" HD 2
Summary of the content on the page No. 4
USB TO IDE 2.5”+3.5”+SATA Cable RCW605 User Manual c. 3.5" SATA hard drive SATA cable d. 5.25" ATAPI device ATAPI device 2. Connect the power adapter set. 3
Summary of the content on the page No. 5
USB TO IDE 2.5”+3.5”+SATA Cable RCW605 User Manual 3. Plug the power adapter to your ATA/ATAPI/SATA device. Please check a to d as below. a. 3.5" ATA b. 2.5" ATA There is no additional power needed for 2.5” HD. c. 3.5" SATA 4
Summary of the content on the page No. 6
USB TO IDE 2.5”+3.5”+SATA Cable RCW605 User Manual d. 5.25" ATAPI 4. Plug the power adapter to power source and turn on the power (Please make sure the voltage is between 00~240V) 5. Plug the USB2.0 cable to PC and wait for PC auto-detection. Driver is needed only in old system such as Windows 98. Please inset the driver disk when your system can’t complete the installation process. Windows will auto-install after it detects the driver disk and choose the most s
Summary of the content on the page No. 7
USB TO IDE 2.5”+3.5”+SATA Cable RCW605 User Manual 6. LED indicator meaning a. When LED is off, RCW605 is not working now. b. When LED is dim, RCW605 is stand by now. c. When LED is illuminated, the hard dirve is transferring or reading its data now. ( The LED will not be illuminated when RCW605 is working with ATAPI device.) 6
Summary of the content on the page No. 8
USB TO IDE 2.5”+3.5”+SATA Cable RCW605 User Manual Notification . RCW-605 can support totally two ATA / ATAPI / SATA devices working together in one time. You can connect one 2.5" or one 3.5" ATA/ATAPI and one SATA devices together to your PC. (Only one 2.5" or 3.5" ATA device can work in one time) 2. Please take off your ATA / ATAPI / SATA device from RCW-605 only after you turn off the power to avoid any damage. 3. If you plug RCW-605 and HD to PC, PC might freeze during the beg
Summary of the content on the page No. 9
USB TO IDE 2.5”+3.5”+SATA Cable RCW605 User Manual ii. Q: After I installed RCW-605 to the hard drive, my hard drive will not run. A: Four pin power connector is directional. If you plug in the four pin power connector in reverse, your hard drive might be damaged. *Solution: Please make sure the direction of 4 pin power connector is correct before you plug it to your hard drive. The shape of the male 4 pin connector must fit the female connector of you
Summary of the content on the page No. 10
www.rosewill.com
