Summary of the content on the page No. 1
Extender for 1.3 over CAT6
GTV-HDMI1.3-CAT6
User Manual
www.gefentv.com
Summary of the content on the page No. 2
Summary of the content on the page No. 3
ASKING FOR ASSISTANCE Technical Support: Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday. Write To: Gefen Inc. c/o Customer Service 20600 Nordhoff St Chatsworth, CA 91311 www.gefentv.com support@gefentv.com Notice Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. Extender for HDMI 1.3 Over CAT-6 is a trademark of Gefen In
Summary of the content on the page No. 4
CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Sender Unit Panel Layout 5 Sender Unit Panel Descriptions 6 Receiver Unit Panel Layout 7 Receiver Unit Panel Descriptions 8 Connecting And Operating The 8 Extender For HDMI 1.3 Over CAT-6 9 Network Cable Wiring Diagram 10 Specifi cations 11 Warranty
Summary of the content on the page No. 5
INTRODUCTION Congratulations on your purchase of the Extender for HDMI 1.3 Over CAT-6. Your complete satisfaction is very important to us. Gefen TV Gefen TV is a unique product line catering to the growing needs for innovative home theater solutions. We specialize in total integration for your home theater, while also focusing on going above and beyond customer expectations to ensure you get the most from your hardware. We invite you to explore our distinct product line and hope you fi nd yo
Summary of the content on the page No. 6
OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE EXTENDER FOR HDMI 1.3 OVER CAT-6 • The distance at which the Extender for HDMI 1.3 Over CAT-6 will carry a signal will vary depending on the source’s resolution and features. - 20m (66 feet) -- HDMI 1.3 w/Deep Color/1080p, Dolby TrueHD or DTS- HD losless multi-channel audio - 30m (99 feet) -- HDMI 1.2 at 1080p with Multichannel Audio - 45m (148 feet) -- HDMI 1.2 at 720p or 1080i with Multichannel Audio • All stated distances ar
Summary of the content on the page No. 7
FEATURES Features • Flexible extension of high-bandwidth HDMI 1.3 thanks to the performance and reliability of CAT-6a cable. • Audio and video are transmitted digitally over the CAT-6a cable for zero signal loss. • Single Link Range: 1080p/60, 12 bit color depth, 1920x1200. • Compliant with HDMI 1.3, HDCP 1.1 and DVI1.1 standards • Supports digital video formats in Deep Color Mode at up to 12bits/color • Supports lossless compressed digital audio (Dolby TrueHD, Dolby Digital Plus and DTS-HD M
Summary of the content on the page No. 8
SENDER UNIT PANEL LAYOUT Front Panel 1 2 3 Back Panel 4 5 4
Summary of the content on the page No. 9
SENDER UNIT PANEL DESCRIPTIONS 1 HDMI Input Port Connect the HDMI source to this input port. 2 Power Indicator LED This LED indicator will become active once the included 5V DC power adapter has bee properly connected between the sender unit and an open wall power socket. 3 5V DC Power Input Port Connect the included 5V DC power supply to this input port. 4 CAT-6a Port (DDC) Connect a ANSI/TIA/EIA-568-B terminated CAT-6a cable between this DDC port and the DDC port on the receiving unit. 5 CA
Summary of the content on the page No. 10
RECEIVER UNIT PANEL LAYOUT Front Panel 1 2 3 Back Panel 4 5 6
Summary of the content on the page No. 11
RECEIVER UNIT PANEL DESCRIPTIONS 1 5V DC Power Input Port Connect the included 5V DC power supply to this input port. 2 Power Indicator LED This LED indicator will become active once the included 5V DC power adapter has bee properly connected between the sender unit and an open wall power socket. 3 HDMI Output Port Connect the HDMI capable output device to this port. 4 CAT-6a Port (VIDEO) Connect a ANSI/TIA/EIA-568-B terminated CAT-6a cable between this VIDEO port and the VIDEO port on the se
Summary of the content on the page No. 12
CONNECTING AND OPERATING THE EXTENDER FOR HDMI 1.3 OVER CAT-6 How to Connect the Extender for HDMI 1.3 Over CAT-6 1. Connect the HDMI source device to the Extender for HDMI 1.3 Over CAT-6 sender unit using the supplied HDMI cable. 2. Connect one pair of CAT-6a* cables between the VIDEO and DDC ports on the sender and receiver. *NOTE: This product was designed for use with CAT-6a (Augmented CAT-6) cabling that is terminated according to the ANSI/TIA/EIA-568B specifi cation. CAT- 5e and CAT-6 ca
Summary of the content on the page No. 13
NETWORK CABLE WIRING DIAGRAM Gefen has specifi cally engineered their products to work with the TIA/EIA-568-B specifi cation. Please adhere to the table below when fi eld terminating cable for use with Gefen products. Failure to do so may produce unexpected results and reduced performance. Pin Color 1 Orange / White 2 Orange 3 Green / White 4 Blue 5 Blue / White 6 Green 7 Brown / White 8 Brown 12345678 CAT-5, CAT-5e, and CAT-6 cabling comes in stranded and solid core types. Gefen recommends u
Summary of the content on the page No. 14
SPECIFICATIONS Video Amplifi er Bandwidth ....................................................................... 225 MHz Video Output ............... 1080p/60, 12 bit color depth, 2k and 1920x1200 max. res Input DDC Signal ................... 5 Volts p-p (TTL); Input Video Signal: 1.2 Volts p-p HDMI Connector ................................................................ Type A, 19 Pin Female Link Connector .............................................................................. RJ-45 Sh
