Summary of the content on the page No. 1
DP-640B
R
Elation Professional
4295 Charter Street
Los Angeles CA. 90058
No. 24-004-1952-00 Rev 1.0
All Rights Reserved!
www.elationlighting.com
Summary of the content on the page No. 2
Notes
Summary of the content on the page No. 3
Technical Specifications Table of Contents Technical Specifications Power Input ..............................................................2x20A, AC 120V~50/60Hz Features ...........................................................................................1 Line cord..................................................................2x12AGWx3C VW-1 105 C General Instruction..........................................................................2 Load.....................................
Summary of the content on the page No. 4
Features Troubleshooting Thank you for purchasing the DP-640B hybrid pack. This product includes the Troubleshooting following features: No Power to the pack: 6 channel hybrid pack with dual Edison sockets per channel. Disconnect the main power line cord. Reconnect the line cord to ensure proper connection. If the problem still persists, check the building service 3 & 5 pin XLR inputs and outputs. panel and make sure the circuit breakers are in the ON position. Each channel can be assigned to Di
Summary of the content on the page No. 5
Operation Guide General Instruction PANIC dip-switches 1~6: This is a 6 channel portable dimmer/pack. Each channel can individually be set to dim or switch as well as accept separate DMX Addresses. For The Panic feature allows you to select desired channels, via dip switches 1-6, to your convenience, each channel can manually be controlled via our be constantly on. simple to use, digital display and function buttons. The Panic function allows you to select desired channels to switch ON constantl
Summary of the content on the page No. 6
Control and Functions Operation Guide Overall Layout Function Mode 4: Dimmer/Switch 1 This menu option allows you to set the pack's channels to dim or switch. Each 8 channel can be individually set to do one or the other. When a channel is set to switch, then that channel will activate when the channel level exceeds 50%. 7 When a channel is set to dim, then that channels intensity can manually be adjusted from 0 to 100%. Press the MENU button until the "Dimmer/Switch" PANIC 1 2 3 4 5 6 ON MD LED
Summary of the content on the page No. 7
Operation Guide Control and Functions Function Mode 3: Local Control (Manual) Data & Power Connections 1 2 The Local Control option allows for manual control of the packs six channels via 1. DMX IN: the on-board buttons. 3 & 5 Pin (male) input socket. 2. DMX OUT: PANIC 1 2 3 4 5 6 ON MD 3 & 5 Pin (female) output socket. 1 2 3 4 5 6 Press the MENU button until the "Local Control' 3. Power 1: LED illuminates. The display will read . DMX Address DMX Signal OK Power cord 1- powers channels Patch Add
Summary of the content on the page No. 8
Operation Guide Operation Guide *Note: Abbreviations within the display represent the following: Function Mode 2: Patch Address (Individual) A=Address, C=Channel, d= Display, s=Switch. Press the MENU button to navigate through the menu options. Continually Press the MENU button until the Patch Address pressing the MENU button will loop through the four options as illustrated below. LED illuminates. The display will show you the When in each function mode, its LED will illuminate. PANIC 1 2 3 4 5
