Summary of the content on the page No. 1
Summary of the content on the page No. 2
CONTENTS CONTENTS 2 VOLUME AND TONE 21 Sending Level Adjustment 21 Receiving Level Adjustment 21 INTRODUCTION Handset Amplifier 21 Unpacking the Ampli500™ 3 DESCRIPTION 4-8 PHONEBOOK 22 Create a Phonebook Entry 22 INSTALLATION Create and Entry from the Setting Up 9 Caller Display Log 23 Make a Call from a Phonebook Entry 23 SETTINGS 10 Delete a Phonebook entry 24 Ringer Volume 10 Modify a Phonebook Entry 24 Ringer Tones 10
Summary of the content on the page No. 3
INTRODUCTION Congratulations on purchasing your Geemarc Ampli500™ telephone. This is a multifunction telephone which offers features such as hands free use, phonebook and caller display*. It also has the added benefits of outgoing voice amplification and receiving amplification. It is important that you read the instructions below in order to use your Geemarc Ampli500™ to its full potential. Keep this user guide in a safe place for future reference. With any questions please contact customer
Summary of the content on the page No. 4
DESCRIPTION Priority memory P2 P3: CS Customer Priority memory Service Key P1 Tone reception adjustment Amplified mode key Volume reception adjustment Direct memory Memory storing key SPEAKER PHONE Hands free microphone Last number redial Headset button (Compatible with Geemarc CLA3 headset accessory) Time break recall button Message waiting / new call Flashing incoming call LED indicator (strobe light) Mute 4
Summary of the content on the page No. 5
Screen tilt DESCRIPTION Additional amplifier button Clip to return to wall mount Speaker Handset cord Speaker volume adjustment Tone & volume adjustment automatically activated each time you hang-up the phone Ringer / shaker / strobe select mode Sending volume adjustment Ringer level adjustment 5
Summary of the content on the page No. 6
DESCRIPTION Screen example (On hook position) Minutes Power network icon Hours Day Month Cancel key Validation key Up/down keys OK button is used to confirm action or a choice on the screen. ▲ ▼ “UP / DOWN arrow” buttons are used to highlight or scroll through the menu. C button is used to cancel or confirm an action/entry or clear a stored Caller ID call. 6
Summary of the content on the page No. 7
DESCRIPTION Your Ampi500™ Phone has a screen with different icons, which help you to use the telephone The telephone is supplied by battery + battery indicator The telephone is powered by AC adapter. Memory storing is required. Screen contrast level. “Mute” is activated. Speakerphone is activated. Precede the CID call record number. To show new records. 7
Summary of the content on the page No. 8
DESCRIPTION Connection Shaker socket Amplification over (Only Geemarc ride switch reference) Adaptor socket** Neckloop socket* (Only Geemarc (Only Geemarc reference) reference) Headset socket* Line cord socket* (Only Geemarc reference) (*) Classified TNV-3 according to EN60950 standard. (**) Classified „hazardous voltage“ according to EN60950 standard. Important: Only Shaker, Neckloop, Headset and Adaptor with Geemarc reference can be connected to the sockets. 8
Summary of the content on the page No. 9
INSTALLATION Setting Up Connect the curly cord and the handset. Remove the screw of the battery compartment, using the screwdriver provided, and open the battery compartment. Insert 4 good quality alkaline batteries (AAA size, 1.5V type, not supplied) into the battery compart- ment located on the base of the telephone. Note : Do not use rechargeable batteries. Do not put batteries into the household rubbish, pay attention to battery regulations regarding battery disposal. Replace the battery co
Summary of the content on the page No. 10
SETTINGS Ringer Volume The ringer volume can be adjusted as high as 95 +dB. A switch located on right side allows the ringer to be switched to OFF, LOW, HIGH. Your telephone comes with the ringer switched to ‘High’. Ringer Tones Press MUTE Use ▲ or ▼ to select ‘SET PHONE’ Press OK Use ▲ or ▼ to select ‘SET RING’ Press OK Select desired ring tone. Use ▲ or ▼ to scroll through and listen to the 4 tones available Press OK to select desired ring tone Press C three times to exit or do nothing
Summary of the content on the page No. 11
SETTINGS Dialing Mode The Tone/Pulse switch is found on the base of the phone near the battery compartment. Set the switch to (T) if you have Touch Tone service. The Tone/Pulse switch is pre-set to Tone position (T). If your phone does not dial out, it is possibly being used from an older private switchboard. In this case, the Tone/Pulse switch must be moved to Pulse (P) Date & Time Setting If you subscribe to Caller I.D. service via your telephone service provider, these parameters will
Summary of the content on the page No. 12
SETTINGS Hour Format You can choose between 12 hours or 24 hours. Press MUTE Use ▲ or ▼ to select ‘SET TIME’ Press OK Use ▲ or ▼ to select the desired digit Press OK to confirm and pass to next digit Press C twice to exit Language Setting You can choose between 16 different languages including English and French. The default is Ameri- can English (English 1). Note: Do not change to a language you cannot read or understand as it will be difficult to return to a language on screen that you
Summary of the content on the page No. 13
SETTINGS Screen Contrast Adjustment Your screen has a backlight that automatically switches off after 15 seconds of inactivity. To decrease or increase the contrast of the backlight: Press MUTE Use ▲ or ▼ to select ‘SET PHONE’ Press OK Use ▲ or ▼ to select ‘LCD CONTRAST’ Press OK Use ▲ or ▼ to select the contrast level that is correct for you Press OK to exit (it will automatically return to time and date screen) Auto On Hook When this feature is ON, if you leave the telephone off the hook by
Summary of the content on the page No. 14
SETTINGS Auto Screen Sizing –DIM:X-->x The phone can show a maximum of 8 digits at full size. You can choose to see the complete number (up to a maximum of 18 digits) by selecting ‘Auto Screen Sizing’. When activated, the phone will display at full size but automatically switch to display small numbers when there is a number with more than 8 digits. The default on arrival is activated. However, if you ever need to change this setting, see below: Press MUTE Use ▲ or ▼ to select ‘SET PHON
Summary of the content on the page No. 15
SETTINGS Area and Long Distance Code Setting When you use your phone for the first time or if you have moved to a different area code, you need to enter your area code into the phone. This assures that when dialing a call out of memory or your phonebook, the number is formatted properly. To set your area code & LDS Code: Press MUTE Use ▲ or ▼ to select ‘SET PHONE’ Press OK Use ▲ or ▼ to select ‘SET AREA & LDS’ Press OK Use ▲ or ▼ to enter your area code. The phone accommodates up to six (6) di
Summary of the content on the page No. 16
USING THE TELEPHONE Answering A Call During an incoming call, your phone will ring and then the number and/or the name of the caller will be displayed on the screen, if you have subscribed to a Caller I.D. service via your telephone provider. Using the handset ● Lift the handset and speak. ● To end the call, replace the handset. SPEAKER PHONE (hands free) ● Your Ampli500™ allows you to speak hands free. When the phone rings, press SPKR. The caller’s voice will be heard throug
Summary of the content on the page No. 17
USING THE TELEPHONE Switching between Speakerphone and Handset To stop using speakerphone during a call, simply lift the handset. To activate speakerphone during a call, press SPKR and replace the headset on the cradle at the same time Hands free calls can also be made using an optional Geemarc headset –see Optional Accessories chapter Call Time Counter The call time counter will be displayed a few seconds after the phone number is connected and starts ringing. To stop the time counter, press
Summary of the content on the page No. 18
USING THE TELEPHONE Deleting Recent Numbers Press OK Screen will display ‘DIALLED’, the last number dialled, total number of numbers dialled plus time and date of displayed number Use ▲ or ▼ to to select the number you wish to delete Press C, the screen will display ‘DEL?’ Press C to confirm Press OK to exit Mute Function If you wish, you can speak privately to someone else in the room without your caller overhearing. You will still be able to hear the caller but they cannot hear you during th
Summary of the content on the page No. 19
USING THE TELEPHONE To store a number Lift the handset Press PROG Dial the number you wish to store, checking on the display that you have keyed it in correctly.(30 digits per telephone number allowed) Press the one touch key button (Priority or Memory dial) where you wish to store it. The screen will display ‘SAVE OK’ Note: Numbers will be lost after a few hours if you disconnect your phone. Dialling stored Numbers Lift the handset or press SPKR or press Headset (if headset plugged in) Pres
Summary of the content on the page No. 20
OPTIONAL ACCESSORIES Headset You can also use your Ampli500™ in hands free mode with an optional Geemarc headset, this is ideal for use with a computer screen. To use the headset Connect the Geemarc headset into the headset socket located at the back of your telephone. Press the headset key to get the dial tone Dial the number You can adjust the volume and tone level of calls received with the VOLUME and TONE slide buttons located on the top of the phone (if function is active) and the sen
