Summary of the content on the page No. 1
Summary of the content on the page No. 2
Important Safety Instructions .............................................................. 1 When using your telephone equipment, these basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons: Contents .................................................................................................. 2 Introduction Read and understand all instructions. Follow all warnings and instructions marked on the product. 1) Welcome ..........
Summary of the content on the page No. 3
ID .................................................................. 21 33 memory Caller Caller id on call waiting (CIDCW) .............................................. 2, New call notification .................................................................. 21 New call review .......................................................................... 22 Caller ID summary .................................................................... 22 22 Call review ...................................
Summary of the content on the page No. 4
Telephone . LCD with backlight . Hands-free speaker phone P . On-hook dialling . 12 one-touch speed dial . Handset Base Unit Curly Cord 7 Pre-Programmed buttons . Wall mountable . Hearing aid compatible . Call waiting compatible . Redial, Flash and Pause . Mute . Music on hold . Call timer l Adjustable ringer volume control l Adjustable ringer tone control AC Adaptor Back-up Battery . Adjustable handset volume control Telephone line cord and adaptor l Adjustable speaker phone volume control 0 a
Summary of the content on the page No. 5
23. Dial button 24. Store button 25. Cancel button 26. Redial / Pause button 27. Hold button 28. Speakerphone button 29. Mute button 30. Memory storage guide 32 Q 1. LCD screen 7. date 2. VIP on icon 8. new call counter 3. VIP call icon 9. numeric line 4. Low battery icon 10. alpha line 5. Message waiting envelope icon 11. call waiting icon 6. time 31. Handset earpiece volume control 32. Speakerphone volume control 33. AC adaptor power socket 34. Telephone line socket 35. Ringer tone switch 36.
Summary of the content on the page No. 6
1. Install the battery. 2. Plug one end of the Handset Cord (curly) into the Handset and the other end into the jack a. Use a Phillips screwdriver to remove the two screws on the battery on the side of the telephone. compartment cover. b. Remove the battery compartment cover. 3. Plug one end of the line cord (straight) into the telephone line jack on the back of the C. Snap the battery's contacts firmly to the battery connector, then place telephone and the other end into the wall outlet. the ba
Summary of the content on the page No. 7
4. Plug the AC Adaptor into a standard 230-240VAC wall outlet and switch it. If required, you can mount your phone directly on the wall. Plug the AC Adaptor lead into the power socket at the back of the phone. Before mounting your phone, please consider the following: l Select a location away from electrical cables, pipes or other items behind the mounting location that could cause a hazard when inserting screws into the wall. l Make sure the wall material is capable of supporting the weight of
Summary of the content on the page No. 8
While the phone is ringing, you can adjust the ringer tone of your telephone by moving the I HANDSET SPEAKERPHONE I ringer tone switch, located at the rear of the telephone, to the desired tone. 1. Pick up the Handset from the Base. 1. Key in desired telephone number. MAKING A 2. Dial desired number. 2. Press dial button (The phone goes CALL 3. Hang up upon completion of the call. speakerphone mode automatically) 3. To hang up, press speaker key. RECEIVING I 1. Pick up the Handset from the Base.
Summary of the content on the page No. 9
ä DIALING THE STORED NUMBERS There are four different ways to dial a stored speed dial number, depending on your preference. 12 one-touch speed dial numbers can be programmed into the memory of your telephone, Each memory location can store a maximum of 32 digits. Pick up the handset and press the desired memory button (1 - 12). ä STORING ONE-TOUCH SPEED DIAL NUMBERS Press the speaker button and then press the desired memory Eg : To program UNIDEN telephone number, 0295993577 into speed dial loc
Summary of the content on the page No. 10
ä EDITING A STORED ONE-TOUCH SPEED DIAL MEMORY 1. Press the store button then the speed dial memory (1-12) vou want to edit Easy access to some of Telstra’s most popular network service features have been factory 2. Move the cursor to the number you would like to ed it e by using >> programmed into this telephone for your convenience. 3. Press delete then key-in the desired number using the keypad 4. Press store (Display shows NAME?) Some of the Telstra network services that will be described he
Summary of the content on the page No. 11
l message bank ä block CID ‘Message Bank’ is Telstra’s “invisible answering machine”. Each time you make a call, your telephone number is automatically When your line is busy, or you are not able to answer your forwarded to the party you are calling (unless your number is a silent phone ‘Message Bank’ to play callers, your own personal number). In certain cases you may wish to prevent your number being greeting and be prompted to leave a message. sent, follow these, steps. You can tell if you ha
Summary of the content on the page No. 12
ä NEW CALL REVIEW To review only new call information; 1 . Press the mode button, and the display will show To make use of these features, you must first subscribe to Telstra’s Caller ID Service, REVIEW NEW CALL. There is usually a fee for this service, and may not be available in all areas. 2. Use the << or >> buttons to view the new calls. When the display shows END OF LIST or TOP OF LIST ä 33 MEMORY CALLER ID When all new calls have been reviewed, the new call When you use this telephone with
Summary of the content on the page No. 13
ä DELETING A CALL FROM THE CALL HISTORY To delete a call from the call history; 1. Use the << or >> buttons until the screen displays the information Uniden ’ ä CALL DISPLAY MESSAGES you wish to delete. 2. Press the delete button once and the display will show DELETE ? PRIVATE on the screen means; 3. Press the delete button again. l The caller has chosen to block their number The phone will beep once, the displayed call record will be deleted l A call from an old type of telephone network exchan
Summary of the content on the page No. 14
ä SPEED DIALING FROM THE VIP LIST 1. Press the mode button twice and the display will show REVIEW VIP CALL ä VIP 2. Use the << or >> buttons to scroll through the VIP list until you locate the number you wish You can transfer any Caller ID record into the VIP Call List and gain these special features: to call. l The telephone will sound a special VIP tone (3 different VIP tones are available) to alert 3. Press the dial button. The telephone will enter the speaker phone mode and dial the you to a
Summary of the content on the page No. 15
ä LCD CONTRAST 1. Press and hold the store button for approximately 2 seconds until the display shows LCD CONTRAST. 2. Press the >> or << buttons to adjust the display contrast to the desired viewing level. If your Telephone is not performing to your expectations, please try these 3. Press the store button to set and move to the next menu option or cancel to save and exit. simple steps. If you are still unable to resolve the problems, contact Uniden Customer Service for assistance. ä TIME/DATE 1
Summary of the content on the page No. 16
Model FP105 One-Year Limited Warranty I Important: Evidence of original purchase is required for warranty service. Compliance TS001 , TS002 ,TS004, TSOO8 AS31 08, AS3548 WARRANTOR: Uniden Australia Pty Limited ACN 001 865 498 Size: 165mm(W) x 115mm(D) x 80mm(H) ELEMENTS OF WARRANTY Uniden warrants to the original retail owner for the duration of this warranty its FP105 (hereinafter referred to as the Product), to be free from defects in materials and craftsmanship Weight: Approx. 880gm with only
