Summary of the content on the page No. 1
TG7100-7120E(e).book Page 1 Tuesday, July 4, 2006 3:29 PM
Operating Instructions
Digital Cordless Phone
Model No. KX-TG7100E/KX-TG7102E
KX-TG7103E
Digital Cordless Answering System
Model No. KX-TG7120E/KX-TG7122E
KX-TG7100
KX-TG7123E
This unit is Caller ID compatible. To display the caller’s phone
number, you must subscribe to Caller ID service.
Charge the batteries for about 7 hours before initial use.
Please read these operating instructions before using the unit and save them for
future
Summary of the content on the page No. 2
TG7100-7120E(e).book Page 2 Tuesday, July 4, 2006 3:29 PM Introduction Introduction Thank you for purchasing a new Panasonic digital cordless phone. For your future reference Attach or keep original receipt to assist with any repair under warranty. Serial No. (found on the bottom of the base unit) Date of purchase Name and address of dealer Note: L This equipment is designed for use on the UK and Republic of Ireland analogue telephone network. L In the event of problems, you should contact y
Summary of the content on the page No. 3
TG7100-7120E(e).book Page 3 Tuesday, July 4, 2006 3:29 PM Table of Contents Preparation Answering System Features Accessory information . . . . . . . . . . . . . . .4 (KX-TG7120/KX-TG7122/KX- Important information . . . . . . . . . . . . . . . .6 TG7123) Controls . . . . . . . . . . . . . . . . . . . . . . . . . .7 Answering system . . . . . . . . . . . . . . . . .23 Displays . . . . . . . . . . . . . . . . . . . . . . . . . .8 Turning the answering system on/off . . .23 Connections . . . .
Summary of the content on the page No. 4
TG7100-7120E(e).book Page 4 Tuesday, July 4, 2006 3:29 PM Preparation Accessory information Included accessories No. Accessory items Quantity KX-TG7100 KX-TG7102 KX-TG7103 KX-TG7120 KX-TG7122 KX-TG7123 1 AC adaptor for base unit 11 1 Part No. PQLV207EZ (PQLV207E) 2 Telephone line cord 11 1 Part No. PQJA87S or PQJA10180Z (for UK) 3 Rechargeable batteries 24 6 AAA (R03) size Part No. HHR-55AAAB or HHR-4EPT *1 4 Handset cover 12 3 Part No. PQYNTG8100E 5 Charger Part No.PQLV30045Z — 1 2 6 AC ad
Summary of the content on the page No. 5
TG7100-7120E(e).book Page 5 Tuesday, July 4, 2006 3:29 PM Preparation Additional/replacement accessories Please contact your nearest Panasonic dealer for sales information. No. Model No. Description *1 1 P03P 2 rechargeable nickel metal hydride (Ni-MH) batteries, AAA (R03) size 2 KX-TGA711E Additional Digital Cordless Handset 3 KX-TCA717EX Wall-Mounting Adaptor 4 KX-TCA718EX Belt Clip 5 KX-A272 DECT repeater *1 Maximum capacity of 750mAh 34 Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289
Summary of the content on the page No. 6
TG7100-7120E(e).book Page 6 Tuesday, July 4, 2006 3:29 PM Preparation unusual noise. These conditions can cause fire or electric shock. Confirm that Important information smoke has stopped and contact an authorised service centre. General Battery caution L Use only the AC adaptor included with this product, noted on page 4. L We recommend using the battery(ies) L Do not connect the AC adaptor to any AC noted on page 5. Use only rechargeable outlet other than a standard 220–240 V battery
Summary of the content on the page No. 7
TG7100-7120E(e).book Page 7 Tuesday, July 4, 2006 3:29 PM Preparation This symbol on the products and/or accompanying documents means that used Controls electrical and electronic products should not be mixed with general household waste. For Handset proper treatment, recovery and recycling, please take these products to designated collection points, where they will be I A accepted on a free of charge basis. J Alternatively, in some countries you may be able to return your products to
Summary of the content on the page No. 8
TG7100-7120E(e).book Page 8 Tuesday, July 4, 2006 3:29 PM Preparation Base unit (KX-TG7100/KX-TG7102/KX-TG7103) Displays A B Display icons Display Meaning icon w Within range of a base unit L When flashing: Handset is searching for base unit. (out of range of base unit, C handset is not registered A Charge contact to base unit, no power on B{x} (Page) base unit) C Ringer L Handset is accessing base unit. (intercom, paging, Base unit changing base unit (KX-TG7120/KX-TG7122/KX-TG7123) s
Summary of the content on the page No. 9
TG7100-7120E(e).book Page 9 Tuesday, July 4, 2006 3:29 PM Preparation L The AC adaptor should be connected to a vertically oriented or floor-mounted AC Connections outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight Base unit of the adaptor may cause it to become When connecting the AC adaptor to the disconnected. base unit, a short beep will be heard. If it is L The unit will not work during a power not heard, check the connections. failure. We therefo
Summary of the content on the page No. 10
TG7100-7120E(e).book Page 10 Tuesday, July 4, 2006 3:29 PM Preparation 2 Insert the batteries negative (T) L If you want to use the unit immediately, terminal first. Close the handset cover. charge the batteries for at least 15 minutes. L Clean the charge contacts of the handset, base unit, and charger with a soft, dry cloth once a month, otherwise the batteries may not charge properly. Clean more often if the unit is exposed to grease, dust or high humidity. Battery strength Battery c
Summary of the content on the page No. 11
TG7100-7120E(e).book Page 11 Tuesday, July 4, 2006 3:29 PM Preparation this case, place the handset on the base times, press {>}, press {V} 2 times, press unit or charger and charge for at least 7 {>}, press {V}, press {>}, select the hours. desired language, press {>}, then press {ih}. Turning the power on/off Date and time Power on 1 {j/OK} Press {ih} for about 1 second. 2 Press {^} or {V} to select “Handset Setup”. i {>} Power off 3 KX-TG7100/KX-TG7102/KX-TG7103 Press {ih} for about 2
Summary of the content on the page No. 12
TG7100-7120E(e).book Page 12 Tuesday, July 4, 2006 3:29 PM Making/Answering Calls 3 “Erase” i {>} 4 “Yes” i {>} i {ih} Making calls 1 Lift the handset and dial the phone Other features number. L To correct a digit, press {C/T}, then Mute enter the correct number. While mute is turned on, you will be able to 2 {C} hear the other party, but the other party will not be able to hear you. 3 When finished talking, press {ih} or To mute your voice, press {C/T}. place the handset on the base uni
Summary of the content on the page No. 13
TG7100-7120E(e).book Page 13 Tuesday, July 4, 2006 3:29 PM Making/Answering Calls Answering calls 1 Lift the handset and press {C} or {s} when the unit rings. L You can also answer a call by pressing any dial key from {0} to {9}, {*}, {#}, or {INT}. (Any key answer feature) 2 When finished talking, press {ih} or place the handset on the base unit or charger. Auto talk feature You can answer calls simply by lifting the handset off the base unit or charger. You do not need to press {C}.
Summary of the content on the page No. 14
TG7100-7120E(e).book Page 14 Tuesday, July 4, 2006 3:29 PM Phonebook 2 Press the dial key ({0} to {9}) which contains the character you are Handset phonebook searching for (page 31). L Press the same dial key repeatedly to The handset phonebook allows you to make display the first entry corresponding to calls without having to dial manually. You each letter located on that dial key. can add 50 names and phone numbers to L If there is no entry corresponding to the handset phonebook. th
Summary of the content on the page No. 15
TG7100-7120E(e).book Page 15 Tuesday, July 4, 2006 3:29 PM Phonebook 2 “Erase All” i {>} 3 “Yes” i {>} 4 “Yes” i {>} i {ih} Chain dial This feature allows you to dial phone numbers in the handset phonebook while you are on a call. This feature can be used, for example, to dial a calling card access number or bank account PIN that you have stored in the handset phonebook, without having to dial manually. 1 While on a call, press {k}. 2 Press {^} or {V} to select the desired entry. L To
Summary of the content on the page No. 16
TG7100-7120E(e).book Page 16 Tuesday, July 4, 2006 3:29 PM Handset Settings Handset settings L When customising the handset, the current item or setting is indicated by >. To customise the handset: 1 {j/OK} 2 Press {^} or {V} to select “Handset Setup”. i {>} 3 Press {^} or {V} to select the desired item in the handset settings menu. i {>} 4 Press {^} or {V} to select the desired item in the sub-menu. i {>} 5 Press {^} or {V} to select the desired setting then press {>} or follow the instructi
Summary of the content on the page No. 17
TG7100-7120E(e).book Page 17 Tuesday, July 4, 2006 3:29 PM Handset Settings KX-TG7120/KX-TG7122/KX-TG7123 Handset settings Sub-menu Feature (default setting) menu Time Settings Set Date & Time Date and time: page 11 Alarm Set the alarm: page 18 *1 Ringer Setup Ringer Volume Handset ringer volume (Maximum) Ext. Ringtone Ringtones for outside calls *2 (External ringtone) (“Ringtone 1”) Int. Ringtone Ringtones for intercom calls *3 (Intercom ringtone) (“Ringtone 3”) *4 Display Setup Standby
Summary of the content on the page No. 18
TG7100-7120E(e).book Page 18 Tuesday, July 4, 2006 3:29 PM Handset Settings Time settings Alarm (KX-TG7120, KX-TG7122, and KX-TG7123 only) An alarm will sound for 3 minutes at the set time once or daily. Set the date and time beforehand (page 11). 1 {j/OK} i “Handset Setup” i {>} 2 “Time Settings” i {>} 3 “Alarm” i Press {>} 2 times. 4 Select an alarm mode. i {>} Off Turns alarm off. Press {>} again, then press {ih} to finish. Once The alarm sounds once at the set time. Enter the desi
Summary of the content on the page No. 19
TG7100-7120E(e).book Page 19 Tuesday, July 4, 2006 3:29 PM Base Unit Settings Base unit settings L Use the handset to customise the base unit. L When customising the base unit, the current item or setting is indicated by >. To customise the base unit: 1 {j/OK} 2 Press {^} or {V} to select “Base Unit Setup”. i {>} 3 Press {^} or {V} to select the desired item in the base unit settings menu. i {>} 4 Press {^} or {V} to select the desired item in the sub-menu. i {>} 5 Press {^} or {V} to select
Summary of the content on the page No. 20
TG7100-7120E(e).book Page 20 Tuesday, July 4, 2006 3:29 PM Base Unit Settings Call options Setting call restriction You can restrict selected handsets from dialling certain numbers. You can assign up to 6 phone numbers to be restricted, and select which handsets will be restricted. Storing area codes here will prevent the restricted handsets from dialling any phone number in that area code. 1 {j/OK} i “Base Unit Setup” i {>} 2 “Call Options” i {>} 3 “Call Restrict” i {>} 4 Enter the ba
