Summary of the content on the page No. 1
Preparation Basic Operation Advanced Operation Useful Information
2.4GHz Cordless Phone
Operating Instructions
Model No. KX-TG2564S
Pulse-or-tone dialing capability
Caller ID Compatible
PLEASE READ BEFORE USE AND SAVE.
Charge the battery for about 15 hours before initial use.
Panasonic World Wide Web address: http://www.panasonic.com
for customers in the USA or Puerto Rico
Summary of the content on the page No. 2
Before Initial Use Please read IMPORTANT SAFETY INSTRUCTIONS on page 71 before use. Read and understand all instructions. Thank you for purchasing your new Panasonic cordless telephone. Caller ID and Call Waiting Service, where available, are telephone company services. After subscribing to Caller ID, this phone will display a caller’s name and phone number. Call Waiting Caller ID, which displays a second caller’s name and phone number while the user is on another call, requires a subscription t
Summary of the content on the page No. 3
For Best Performance Battery Charge A rechargeable Ni-Cd battery powers the The battery cordless handset. Charge the battery for is beneath the about 15 hours before initial use (p. 11). cordless handset cover located here. Base Unit Location/Noise Calls are transmitted between the base unit and the cordless handset using wireless radio waves. For maximum distance and noise-free operation, the recommended base unit location is: Away from electrical In a HIGH and CENTRAL appliances such as a TV
Summary of the content on the page No. 4
Contents Preparation Location of Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Battery Charge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Date and
Summary of the content on the page No. 5
Preparation Basic Operation Advanced Operation Useful Information Voice Mail Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 (Cordless\Handset) Storing a Voice Mail Access Number . . . . . . . . . 52 (Cordless\Handset) Setting the Voice Mail (VM) Tone Detection . . . 54 (Cordless\Handset) (Base\Unit) Listening to Voice Mail Messages . . . . 55 Special Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Temporary Tone Dialing (For
Summary of the content on the page No. 6
3 2 1 5 6 4 9 7 8 0 KX-TG2564 Location of Controls Base unit (VM) (Voice mail) Button and Indicator (p. 52, 54, 55) Antenna (p. 3, 10) Antenna (p. 3, 10) DIRECT Buttons (p. 48) (REDIAL) Button (p. 26) (TONE) Button (p. 56) (FLASH/CALL\WAIT) Button (p. 57, 58) (HOLD) Button (p. 27) 6
Summary of the content on the page No. 7
Preparation 3 2 1 5 6 4 8 9 7 0 KX-TG2564 “ Display (p. 9, 65) (CLEAR) Button (p. 37, 46) (EXIT) Button (p. 18, 30, 43) (FUNCTION/EDIT) Button (p. 18, 33) Navigator Key ((‹), (›), (fi), (fl)) (p. 18, 27, 30, 42) (PAUSE) Button (p. 57) (RINGER) Button (p. 20) MIC (Microphone) (LOCATOR/INTERCOM) (p. 26, 28, 49) Button (p. 49) (DIGITAL\SP-PHONE) (Speakerphone) (MUTE) Button (p. 56) Button and Indicator (p. 26, 28) How to use the Navigator key This key has four active areas that are indicated by
Summary of the content on the page No. 8
“ Location of Controls Cordless handset Antenna Display (p. 9, 64) (OFF) Button Headset Jack (p. 62) (p. 17, 23, 30, 43) (TALK) Button (CLEAR/INTERCOM/HOLD) (p. 23, 28) Button (p. 24, 25, 37, 41, 46, 49) (MUTE/FUNCTION) Navigator Key Button (p. 17, 56) ((‹), (›), (fi), (fl)) (TONE) Button (p. 56) (p. 17, 24, 25, 30, 40, 42) Charge Contact (p. 12) Charge Contact (p. 12) (REDIAL/PAUSE) Button (FLASH/CALL\WAIT/VOICE\MAIL) (p. 24, 57) Button (p. 55, 57, 58) How to use the Navigator
Summary of the content on the page No. 9
Preparation CHARGE Charger unit Charge Contacts (p. 12) CHARGE Indicator (p. 11) Displays Cordless handset 2 3 1 The display shows the dialed number, call status, programming options and directory items etc. If you subscribe to a Caller ID service, caller information 0 new call 1 will be displayed (p. 29). The number of new calls will also be displayed. 4 2 The voice mail icon displays when the voice mail message(s) is/are recorded (p. 52). 3 The directory icon displays when storing or viewing t
Summary of the content on the page No. 10
Settings Connections Base unit Raise the antennas. Handset Power Outlet (AC 120 V, 60 Hz) Handset Cord Fasten the AC adaptor cord to prevent it from being disconnected. Hook AC Adaptor Single-Line Telephone Jack (RJ11C) Telephone Line Cord ≥USE ONLY WITH Panasonic AC ADAPTOR PQLV10 (Order No. PQLV10Z). ≥The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) ≥Use only a Panasonic Handset for the KX-TG2564S. ≥To connect a standard telephone on
Summary of the content on the page No. 11
Preparation “ Charger unit Power Outlet (AC 120 V, 60 Hz) AC Adaptor ≥USE ONLY WITH Panasonic AC ADAPTOR KX-TCA1 (Order No. KX-TCA1-G). ≥The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) Battery Charge Place the cordless handset on the charger and charge for about 15 hours before initial use. ≥Make sure the cordless handset faces forward as shown. ≥The CHARGE indicator lights and a beep sounds. ≥Charge time may be longer than 15 hours depe
Summary of the content on the page No. 12
“ Settings Recharge Recharge the battery when: Recharge battery —“Recharge battery” is displayed, —“ ” flashes on the display, or —the cordless handset beeps intermittently while it is in use. ≥If you DO NOT recharge the cordless handset battery for more than 15 minutes, the display will continually indicate “Recharge battery” and/or “” will continue to flash when the cordless handset is lifted off the charger. Battery information After your Panasonic battery is fully charged (p. 11): Operation Ap
Summary of the content on the page No. 13
Preparation “ (Base\Unit) Date and Time Make sure the base unit and cordless handset are not being used. Press (FUNCTION/EDIT). 1Date and time 1 Save DIRECT# 43 1=Yes Press (fl) (Yes key) at “Date and time”. Date:2002.01.01 2 0-9=Date 21 43 4=Next Enter the current date (year, month, and Date:2002.04.15 3 day) using 4-digit numbers. 0-9=Date 21 (Ex. To set Apr. 15, 2002, enter “2002” 43 4=Next and “0415”.) Press (›) (Next key). Time:12:00AM 4 0-9=Time 21 ¢=AM/PM 4=Next Enter the cu
Summary of the content on the page No. 14
“ Settings If a power failure occurs, the time/date flashes on the base unit display. Adjust the date/time. For Caller ID service users (p. 29) ≥The Caller ID information will reset the clock after the first ring if the adjusted time and/or date is incorrect. ≥If the time has not previously been set, the Caller ID information will not adjust the clock. ≥The Caller ID information will automatically adjust the clock for daylight saving time. 14
Summary of the content on the page No. 15
Preparation “ (Cordless\Handset) Dialing Mode You can program the dialing mode using the cordless handset near the base unit. If you have touch tone service, set to “Tone”. If rotary or pulse service is used, set to “Pulse”. Your phone comes from the factory set to “Tone”. Make sure the base unit and cordless handset are not being used. Press (MUTE/FUNCTION). 1Save directory 1 Ringer volume 43 1=Yes Scroll to “Program” by pressing (›) or (‹). LCD contrast 2 1Program 43 1=Yes Press (fl) (Yes key).
Summary of the content on the page No. 16
“ Settings (Cordless\Handset) Line Mode You can program the line mode using the cordless handset near the base unit. If the line is connected to a low voltage system such as a PBX, set to “B”. Otherwise the Call Waiting Caller ID Feature may not be used (p. 57). Your phone comes from the factory set to “A”. Make sure the base unit and cordless handset are not being used. Press (MUTE/FUNCTION). 1Save directory 1 Ringer volume 43 1=Yes Scroll to “Program” by pressing (›) or (‹). LCD contrast 2 1P
Summary of the content on the page No. 17
Preparation Programmable Functions “ (Cordless\Handset) You can program the following function items using the cordless handset near the base unit. The display shows the programming instructions. See the corresponding pages for function details. Make sure the base unit and cordless handset are not being used. Press (MUTE/FUNCTION) on the cordless handset. * 1Save directory To store an item in the directory (p. 39). Ringer volume To select the ringer volume (p. 20). LCD contrast To
Summary of the content on the page No. 18
“ Programmable Functions (Base\Unit) You can program the following function items using the base unit. The display shows the programming instructions. See the corresponding pages for function details. Make sure the base unit and cordless handset are not being used. Press (FUNCTION/EDIT) on the base unit. * 1Date and time To adjust the date and time (p. 13). Save DIRECT# To store the phone numbers in the DIRECT buttons (p. 47). LCD contrast To select the LCD contrast of the base un
Summary of the content on the page No. 19
Preparation “ (Cordless\Handset) Auto Talk Feature The Auto Talk feature allows you to answer a call by lifting the cordless handset off the charger without pressing . If you want to use this feature, turn the feature ON by programming. Your phone comes from the factory set to OFF. Make sure the base unit and cordless handset are not being used. Press (MUTE/FUNCTION). 1Save directory 1 Ringer volume 43 1=Yes Scroll to “Program” by pressing (›) or (‹). LCD contrast 2 1Program 43 1=Yes Press (fl) (
Summary of the content on the page No. 20
“ Programmable Functions Ringer Volume You can program the cordless handset and base unit ringer volumes to HIGH, LOW or OFF. If set to OFF, the cordless handset and base unit will not ring. Your phone comes from the factory set to HIGH. Make sure the base unit and cordless handset are not being used. (Cordless\Handset) Press (MUTE/FUNCTION). 1Save directory 1 Ringer volume 43 1=Yes Scroll to “Ringer volume” by Save directory 2 pressing (›) or (‹). 1Ringer volume 43 1=Yes Press (fl) (Yes key). Ri
