Summary of the content on the page No. 1
Operating Instructions
Digital Cordless Phone
Model No. KX-TG1805NZ
This unit is Caller ID compatible. To display the caller’s phone
number, you must subscribe to Caller ID service.
Charge the batteries for about 7 hours before initial use.
Please read these operating instructions before using the unit and save them for
future reference.
Summary of the content on the page No. 2
Introduction Introduction Thank you for purchasing a new Panasonic digital cordless phone. For your future reference Attach or keep original receipt to assist with any repair under warranty. Serial No. (found on the bottom of the base unit) Date of purchase Name and address of dealer Note: L In the event of problems, you should contact your equipment supplier in the first instance. 2
Summary of the content on the page No. 3
Table of Contents Preparation Useful Information Accessory information . . . . . . . . . . . . . . .4 Wall mounting . . . . . . . . . . . . . . . . . . . .31 Important information . . . . . . . . . . . . . . . .5 Available character entries. . . . . . . . . . .32 Controls and displays . . . . . . . . . . . . . . . .6 Troubleshooting . . . . . . . . . . . . . . . . . . .34 Connections . . . . . . . . . . . . . . . . . . . . . . .7 Specifications . . . . . . . . . . . . . . . . . . . . .37 Battery
Summary of the content on the page No. 4
Preparation Accessory information Included accessories AC adaptor Telephone line cord Rechargeable batteries PQLV19AL (AAA size) HHR-4EPT Handset cover Operating instructions Additional/replacement accessories Model No. Description HHR-4EPT 2 rechargeable nickel metal hydride (Ni-MH) batteries KX-TGA120AZ Additional Digital Cordless Handset KX-A272 DECT repeater General Warning: The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item
Summary of the content on the page No. 5
Preparation L Unplug this unit from power outlets if it emits smoke, an abnormal smell or makes Important information unusual noise. These conditions can cause fire or electric shock. Confirm that General smoke has stopped and contact an L Use only the AC adaptor included with this authorised service centre. product, noted on page 4. L Do not connect the AC adaptor to any AC Location outlet other than a standard 220–240 V L For maximum distance and noise-free AC outlet. operation, place
Summary of the content on the page No. 6
C T Preparation Note: L Up to 3 menu items can be displayed at a Controls and displays time. To select a menu item not shown on the current page, scroll up or down by Controls pressing the navigator key, {e} or {v}, respectively. Handset Base unit G H I B J C K D A E A B L A{x} (Page) F M B Charge contact A Charge contact B{k} (Phonebook) C{C} (Talk) D Navigator key L{e}{v}: To search for the desired item in menus. L{>}: To select the desired item or move the cursor to the right. L{<}: To r
Summary of the content on the page No. 7
Preparation Displays Connections Display icons When the AC adaptor is connected, a short Various icons appear on the handset display beep will be heard. If it is not heard, check to indicate the current status of the unit. the connections. Display Meaning icon Hooks w Within range of a base unit L When flashing: Handset is searching for base unit. (out of range of base unit, handset is not registered to base unit, no power on base unit) L Handset is accessing base unit. (intercom, pagin
Summary of the content on the page No. 8
Preparation When the batteries are fully charged, 5 remains on the display. Battery installation 1 Insert the batteries negative (T) terminal first. 2 Close the handset cover. Note: L It is normal for the handset to feel warm during charging. L It takes 7 hours to fully charge the batteries, however, you can use the handset before the batteries are fully charged. L Clean the charge contacts (page 6) of the Note: handset and base unit with a soft, dry L Use only rechargeable batteries (page
Summary of the content on the page No. 9
Preparation L If the handset is turned off, it will be turned 1 Press the notch on the handset cover on automatically when it is placed on the firmly and slide it in the direction of the base unit. arrow. Battery life After your Panasonic batteries are fully charged, you can expect the following performance: Ni-MH batteries (700 mAh) Operation Operating time While in use (talking) 20 hours max. 2 Remove the old batteries positive (S) While not in use 170 hours max. terminal first and install
Summary of the content on the page No. 10
Preparation 5 Enter the current hour and minute by selecting 2 digits for each. L You can select “AM”, “PM” or 24-hour time entry by pressing {*} repeatedly. Example: 3:30 PM Press {0}{3}{3}{0}, then press {*} repeatedly until “03:30 PM” is displayed. 6 Press {j/OK}. 7 Press {ih}. Note: L To correct a digit, press {<} or {>} to move the cursor, then make the correction. L The date and time may be incorrect after a power failure. In this case, set the date and time again. 10
Summary of the content on the page No. 11
Making/Answering Calls 3 Select “Edit and Call”, then press {>}. Making calls 4 Press {<} or {>} to move the cursor, 1 Lift the handset and dial the phone then edit the number. number. L Place the cursor on the number you L To correct a digit, press {C/T}, then wish to erase, then press {C/T}. enter the correct number. L Place the cursor to the right of where 2 Press {C}. you want to insert a number, then press the appropriate dial key. 3 When finished talking, press {ih} or place the ha
Summary of the content on the page No. 12
Making/Answering Calls Note: Other features L If your unit is connected to a PBX (private branch exchange), pressing {R} can allow Voice enhancer you to access certain features of your host You can change the tone quality of the PBX such as transferring an extension receiver while you are on a call. 3 settings call. Consult your PBX dealer for details. are available. L You can change the recall time (page 23). 1 Press {j/OK} during a call. Call waiting 2 Select the desired setting, then pr
Summary of the content on the page No. 13
Making/Answering Calls 2 When finished talking, press {ih} or place the handset on the base unit. Auto talk feature You can answer calls simply by lifting the handset off the base unit. You do not need to press {C}. To turn this feature on, see page 19. To adjust the ringer volume when an outside call comes in Press {e} or {v} when an outside call comes in. Note: L The ringer volume cannot be adjusted if the handset is on the base unit. Other features Handset locator Using this feature, y
Summary of the content on the page No. 14
Phonebook Scrolling through all entries Using the phonebook 1 Press {k}. The phonebook allows you to make calls 2 Press {e} or {v} repeatedly to display without having to dial manually. You can add the desired entry. 20 names and phone numbers to the phonebook and search for phonebook Editing entries in the phonebook entries by name. Phonebook entries can be edited after you have saved them. You can change the name Adding entries to the phonebook and phone number. 1 Press {k}, then press
Summary of the content on the page No. 15
Phonebook Chain dial This feature allows you to dial phone numbers in the phonebook while you are on a call. This feature can be used, for example, to dial a calling card access number or bank account PIN that you have stored in the phonebook, without having to dial manually. 1 While on a call, press {k}. 2 Press {e} or {v} repeatedly to select the desired entry. 3 Press {>} to dial the number. 15
Summary of the content on the page No. 16
Handset Settings Guide to handset settings For your reference, a chart of all items which can be customised for the handset is printed below. L When customising the handset, the current item or setting is indicated by >. Handset settings Sub-menu Sub-menu 2 Default setting Page menu Set Date & Time — — page 9 Ringer Setup Ringer Volume Maximum page 17 Ext. Ringtone Ringtone 1 page 17 Int. Ringtone Ringtone 1 page 17 Night Mode Start/End 23:00/06:00 page 17 On/Off Off page 17 Ring Delay 60 sec.
Summary of the content on the page No. 17
Handset Settings Ringer setup Night mode Night mode allows you to select a block of Ringer volume time during which the handset will not ring for outside calls. This feature is useful for 1 Press {j/OK}. times when you do not want to be disturbed, 2 Select “Handset Setup”, then press for example, while sleeping. Night mode can {>}. be set independently for the handset and the 3 Select “Ringer Setup”, then press base unit (page 22). Set the date and time beforehand (page 9). {>}. 4 Select
Summary of the content on the page No. 18
Handset Settings 4 Select “Night Mode”, then press {>}. 4 Select “Standby Display”, then press {>}. 5 Select “On/Off”, then press {>}. 5 Select the desired setting, then press 6 Select “On” or “Off”, then press {>}. {>}. 7 Press {ih}. 6 Press {ih}. Note: Note: L When the night mode is turned on, “[N]” L If “Handset Number” is selected and the is displayed. current handset number is 2, “[2]” is displayed. Setting the ring delay for night mode This setting allows the handset to ring during Ch
Summary of the content on the page No. 19
Handset Settings 7 Press {ih}. 5 Enter the current 4-digit handset PIN. 6 Enter the new 4-digit handset PIN, then Note: press {j/OK}. L When call bar is turned on, o is displayed. 7 Press {ih}. Turning auto talk on/off Turning keytones on/off When this feature is turned on, you can Keytones are tones heard when keys are answer calls simply by lifting the handset off pressed. Includes confirmation tones and the base unit. You do not need to press error tones. {C}. 1 Press {j/OK}. 1 Press {
Summary of the content on the page No. 20
Handset Settings – Settings listed on page 16 – Redial list – Voice enhancer L The following items will be retained: – Phonebook entries – Date and time 20
