Nortel Networks Enterprise Edge M7324N user manual

Summary of the content on the page No. 1

Enterprise Edge
M7324N
User Card
© 2000 Nortel Networks
P0908520 Issue 02

Summary of the content on the page No. 2

Summary of the content on the page No. 3

Your Enterprise Edge M7324N Telephone Display shows the time, date, and call information; guides you while using features; tilts for easy viewing. The lower line of the display is reserved for display button instructions. Display buttons Release button cancels active calls Feature button starts or ends a feature. Hold button Dial pad Volume control Indicators appear beside active lines and features. Memory and line buttons are buttons with labels for one-touch dialing, feature operation, o

Summary of the content on the page No. 4

Making and answering calls Answering calls Answering calls using the handset When your telephone rings, or ¼ flashes beside an Intercom or line button: 1. Lift the handset. OR Press the button beside the flashing ¼ before lifting the handset. Answering calls using Handsfree When your telephone rings, or ¼ flashes beside an Intercom or line button: 1. Press ©. Making calls Depending upon the dialing mode programmed on your telephone, you may have to lift the handset before making a call. Â Ext

Summary of the content on the page No. 5

Programming memory buttons About memory buttons Memory buttons are the buttons with labels other than line or Handsfree buttons. Memory buttons store telephone numbers or feature codes to give you one-touch dialling or feature activation. You can change the function of a memory button by programming it with a new number or feature. If you have programmed a memory button with an extension number, the indicator comes on when the number is busy. Remember: Press Ä¥â to check a memory or l

Summary of the content on the page No. 6

Setting up the telephone ATTENTION Before attempting to carry Connecting the cords out any work on the telephone, ensure 1 2 that the line cord is unplugged from the wall socket. Press here firmly To remove any of the cords, squeeze the until it clicks, to release latch on the plug and gently pull attach the stand. the plug from the socket. Connect the handset cord to the jack labelled with the telephone icon and route the cord as shown. If you are using a headset, route the cord alon