Summary of the content on the page No. 1
Summary of the content on the page No. 2
Summary of the content on the page No. 3
z< l Lift handset. PLACING AN OUTSIDE tIiAitUSlNG HANDSFREE DlAllNG * l Depress idle outside line button. l Depress ON/OFF button. l Dial desired telephone number. l Depress idle outside line button. NOTE: When placing consecutive calls l Dial desired telephone number, the RECALL button may be used to l Lift handset when called partys voice is heard through speaker, disconnect existing call and to [Handset not required when equipped with Speakerphone.] provide dial tone. NOTE: If “
Summary of the content on the page No. 4
* Dial digit “1” to transmit tone signal. l Lift handset, (Depress ON/Off bution ifequipped NOTE: When calling a Single Line telephone, with Speakerphone.) no voice announcement is available. l Depress ICM button, OR Ring signal will be automatically pro- l Dial desired station number, vided. l Voice announce after hearing tone burst; PLACING AN INTERCOM CALL USING STATION OSS BUTTONS l Dial digit “1” to transmit l Lift handset. (Depress ON/OFF button if equipped with Speakerphone.)
Summary of the content on the page No. 5
SETTING CALL BACK REQUEST l Call station and receive “no answer” or Call Waiting Tone. l Dial “#“. l Verify at display: ‘5” = accepted “d” = denied l If accepted, your station number will flash intermittently in the called key set’s display, indicating your “call back request”. SETTING AUTOMATIC CALL BACK l Call station and receive Call Waiting Tone. l Dial “0”. l Verify at display: “Cb” = accepted “d” = denied l If accepted, you will receive tone signal when the called station becomes
Summary of the content on the page No. 6
l Depress HOLD button. l Held line button will wink intermittently on your keyset. All other keysets will receive a rapid-flash on that line button. NOTE: When you place an intercom call on hold, the HOLD button will rapid-flash. PLACING CALLS ON EXCLUSIVE HOLD l Depress HOLD button twice. l Held line button will wink intermittently on your keyset. All other keysets will receive a steadily lit LED on that line button. NOTE: If a call remains on exclusive hold longer than a preset interva
Summary of the content on the page No. 7
;i. l Depress HOLD button. l Depress ICM button. l Dial desired station number. l Announce transfer, informing station which line to pick up. NOTE: When transferring a call to a station which does not have that line appearance, the following procedure must be used; l Depress HOLD button. l Depress ICM button. l Dial desired station number and wait for party to answer over handset. l Depress ADD/ON button. l Depress intermittently winking line button. l Confirm transfer and replace ha
Summary of the content on the page No. 8
l Dial three digit station number to be programmed. l Depress ADD/ON button. l Depress desired station DSS button (I-20) l Depress ADD/ON button again. INTERCOM CALLING USING STATION DSS BUTTONS l Lift handset. (Depress ONIOfFbutton if equipped with Speakerphone.) l Dial digit “1” to transmit l Depress desired station DSS button. OR tone signal. . l Voice announce after hearing tone burst; NOTE: When calling a single line telephone, no voice announcement is available. Ring signal will aut
Summary of the content on the page No. 9
l Depress speed dial button to be verified (I-20) while keGet is idle. l Read number in display (one digit at a time). l Lift handset or depress ON/OFF button. l Depress idle outside line button. l Dial “#” and two-digit access code. (IO-IO> l When party has answered, use handset to begin conversation, (Hcmdsef not required when equipped with Speakerphone.) Consecutive speed dialing has particular value when accessing Specialized Common Carrier Networks, where multiple dialing sequences
Summary of the content on the page No. 10
ATHREE-PARTYCONFERENCE l Establish first call. l Depress HOLD button, l Establish second call. l Depress ADD/ON button. l Depress held line button (or HOLD button for intercom call). NOTE: A three-party conference may consist of the following: 1 internal station + 2 outside lines 3 internal stations 2 internal stations + 1 outside line AFOUR-PARTYCONFERENCE l Establish three-party conference as outlined above. l Depress HOLD button. l Establish third call, l Depress ADD/ON button.
Summary of the content on the page No. 11
SETTING l Depress ON/OFF button. l Depress ICM button. l Dial “46” l Dial station number calls should be forwarded to. l Dial “I” for all calls to be forwarded. l Dial “2” for calls to be forwarded only when your station is busy, l Receive confirmation tone. l Depress ON/OFF button. NOTE: The HOLD LED will be lit steadily when call forwarding is set. CANCELllNG l Depress ON/OFF button, l Depress ICM button, l Dial “46”. l Depress ON/OFF button again. VERIFYING l Depress ON/OFF bu
Summary of the content on the page No. 12
l Lift handset. (Depress ONIOFFbufton if l Depress ICM button. equipped with Speakerphone.) l Dial “2” to establish connection. l Dial “W’. l Lift handset or depress ON/OFF button. l Depress idle outside line button. l When party has answered, use handset to talk. (Handset not required when equipped with Speakerphone.) SETTING l Depress DND button; LED lights steady. CANCELLING l Depress DND button; LED goes out. @A rapid-flashing DND LED indicates that the attendant has a Message Wa
Summary of the content on the page No. 13
SINGLE LINE TELEPHONE l Lift handset, listen for dial tone. l Dial desired station number. l Wait for party to answer. l Lift handset, listen for dial tone. l Dial outside line access code (9,8, or 7). l Dial telephone number. *Ask party to hold. l Depr;ess switchhook momentarily, listen for second dial tone. l Place a second call if desired, NOTE 1: When handset is restored your phone will ringback immediately with your held call. NOTE 2: If attendant camp-on tone or station tone ove
Summary of the content on the page No. 14
l Inform party of transfer, l Depress switchhook momentarily, listen for second dial tone. l Dial desired station number immediately. l Depress switchhook momentarily, when station answers, l Confirm transfer and replace handset. NOTE: If station is busy or does not answer, depress switchhook momentarily to return to held party. l Establish first call. l Depress switchhook momentarily, listen for second dial tone. l Establish second call, l Depress switchhook momentarily. l Confirm thr
Summary of the content on the page No. 15
l Lift handset, l Dial “40”. l Dial two digit access code, 20 through 29. 0 Dial outside line access code, 9,8, or 7. l Dial telephone number. l Replace handset. ACCESSING STATION SPEED DIALING l Lift handset. l Dial “#“. l Dial two digit access code, 20 through 29, l Lift handset. l Dial ‘*#“. l Dial Iwo digit access code, 10 through 19. l Lift handset.
Summary of the content on the page No. 16
SETTING l Lift handset. l Dial “46”. l Dial station number you wish your calls to be forwarded to. l Dial rrly’ for all calls to be forwarded. l Dial “2” for calls to be forwarded only when your phone is busy. CANCELLING l Lift handset. l Dial 46 and replace handset, l Lift handset. l Dial 2. l You will be connected to the incoming intercom or attendant transferred call to a station within your programmed group. NIGHT CALL PICKUP l Lift handset. l Dial 3. l You will be connected
Summary of the content on the page No. 17
ANSWERING l Lift handset. l Lift handset, T Dial internal zone access code (51,52,53 or 50). l Voice page. l Dial 55. ANSWERING l Lift handset. l Lift handset. l Dial external zone page access code (61,62,63 or 60). l Voice page. l Dial 65. Account code entry applies only to those systems equipped with station message detail service (SMDS), l Dial telephone number, l Immediately dial * and the account code (up to nine digits). [To enter Account Code, dial manually or access speed d
Summary of the content on the page No. 18
DIRECTORY NOTES Name Area Code &Number
