Summary of the content on the page No. 1
CST25
Sound-enhanced
Speakerphone with CALLER ID
Installation Guide & User Manual
©2006 ClearSounds Communications. All right reserved.
Summary of the content on the page No. 2
Table of Contents SETTING UP AND INSTALLING YOUR PHONE ................................................. 1 Introduction ......................................................................................................... 1 Important Safety Instructions .............................................................................. 1 Parts Checklist .................................................................................................... 2 Installation ....................
Summary of the content on the page No. 3
Troubleshooting ................................................................................................ 16 LIMITED WARRANTY ......................................................................................... 16 Warranty Limitation ........................................................................................... 17 What This Warranty Does Not Cover ............................................................... 17 State Law Rights .....................................
Summary of the content on the page No. 4
Setting Up and Installing Your Phone Introduction Congratulations on the purchase of your new telephone. It has been manufactured to very high quality standards for convenient and reliable service. This telephone can be used with "Call Identification (CALLER ID) Service" and/or "Call Waiting CALLER ID Service" that is provided by your local telephone company. There is a fee for these services by your local telephone company, and they may not be available in all areas. When used
Summary of the content on the page No. 5
12. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: (a) When the power supply cord or plug is damaged or frayed. (b) If liquid has been spilled into the product. (c) If the product has been exposed to rain or water. (d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions. (e) If the product has been dropped
Summary of the content on the page No. 6
Controls and Functions 1. LCD display 2. Message light - Visual message waiting indicator. 3. ◑ button – to adjust LCD contrast. 4. Flash button – during a call, to access telco’s calling features. 5. Pause button – to insert 3 seconds delay during memory button programming. 6. Save – to begin programming of memory buttons. 7. Vol. up button – to increase receiver volume for handset and speakerphone. 8. Overlay paper 9. M1 – programmable memory button 10. M2 – programmable memo
Summary of the content on the page No. 7
15. Hold with indicator – to put a call on hold, LCD will display “Hold” 16. Mute with indicator – to mute transmitter, LCD will display “Mic Muted” 17. Visual ringer and speakerphone indicators 18. Telephone keypad 19. - to review upward from the oldest CALLER ID record. 20. - to review downward from the newest CALLER ID record. 21. Delete button – to delete one or all CALLER ID records, or Message light. 22. Dial button – to dial number displayed or to accept entry 23. Index card
Summary of the content on the page No. 8
5. Program your area code (A) After selecting the language, the display flashes "ENTER AREA CODE" and “7 DIGITS DIAL”. #00 (B) If you dial your local calls using 7 digits (e.g., 555- _ _ _ 1212), then enter your local area code, press the ENTER AREA CODE Dial button, and go to Step C. 7 DIGITS DIAL If you dial your local calls using 10 digits (e.g., 303- 555-1212), then enter “000” as the area code for 7 digits dial, and press the Dial button to go to Step C.
Summary of the content on the page No. 9
Wall Mounting 1. Turn the phone over so that you are looking at the bottom of the phone. Insert tabs at the thin end of the wall mount bracket into the holes at the rear of the phone bottom. Press and latch the tabs at the thicker end of the wall bracket into holes at the front end of phone. The back of the phone should then have two round plastic holes that can be used to hang your phone on the wall. 2. Use the two round holes to hang the phone on the wall plate on your wall.
Summary of the content on the page No. 10
Adjusting Speakerphone Receiver Volume To adjust the speakerphone receiver volume: 1. Press the Speaker button and listen to the dial tone. 2. Press the Volume up button to increase the receiver volume. 3. Press the Volume down button to decrease the receiver volume. 4. Press the Speaker button when the desired receiver volume is reached. Page 7
Summary of the content on the page No. 11
Using the Telephone Making a Call 1. Pick up the Handset or press the Speaker button, and listen for a dial tone. 2. Using the Keypad, dial the desired telephone number. The number you are dialing will appear on the display as you dial. When making a call or talking on the phone, the "In Use" light will turn on indicating the phone is in use. This light will also be on whenever another phone on the same phone line is in use. Editing Telephone Number before Dialing You can enter t
Summary of the content on the page No. 12
Switching Between the Handset and the Speakerphone To switch a call between the Handset and the Speakerphone during a conversation: 1. While talking on the handset, press the Speaker button to activate the speakerphone. The call can now be heard from the speakerphone. 2. While talking on the speakerphone, simply lift up the handset and the call will be transferred to the handset and will no longer be heard on the speakerphone. 3. Hang up the handset. Hanging up the handset will not
Summary of the content on the page No. 13
Storing a New Number and Name in the Memory Buttons To store a new number and name in the memory buttons: 1. Press the Save button when the display shows no SAVE TO? caller’s number or name. The “SAVE TO?” prompt appears on the display. 2. Press the memory button where you wish to store #00 this telephone number (e.g., M1). The “ENTER NUMBER>“ prompt appears on the display. ENTER NUMBER> 3. Us
Summary of the content on the page No. 14
CALLER ID CALLER ID Service and Call Waiting CALLER ID Service The "CALLER Identification" service (CALLER ID) allows the caller’s phone number and/or name to be shown on the display as the call comes in before you pick up the phone. In order to use this feature, YOU MUST FIRST SUBSCRIBE TO THE CALLER ID SERVICE provided by your local telephone company. The name of this service may vary depending on your telephone company. Before using this feature, please make sure you have properly
Summary of the content on the page No. 15
Viewing the CALLER ID List This CALLER ID telephone automatically stores in the #80 Call Memory the CALLER ID information of the last 99 calls received. It keeps track of all calls received, END OF RECORD whether they were answered or not. The oldest call in the Call Memory is always call #1. The highest numbered call (or call #99 if the Call Memory is full) is always the most recent call. If the Call Memory is full with 99 calls and a new call comes in
Summary of the content on the page No. 16
Deleting All Calls from the CALLER ID List To delete all the calls stored in Call Memory at once, press and hold the Delete button for 5 seconds. The #00 entire list of calls will be completely cleared and the display shows "DEL ALL!”. . DEL ALL! Using Call Waiting CALLER ID If another call comes in during a conversation, your phone will display the "WAITING" message in the upper right hand corner and the incoming caller's information will be displ
Summary of the content on the page No. 17
listen to your new message, the message waiting indicators will turn off automatically after a short delay. If these indicators remain on even after you have listened to all your messages, you can manually clear the indicators by pressing the Delete button when “MESSAGES” and “NEW CALLERS” are displayed on LCD, alternatively. UNAVAILABLE, PRIVATE CALL and ERROR Messages Certain messages may appear instead of a caller's name and/or number: 1. The screen will display "UNAVAILABLE" if a
Summary of the content on the page No. 18
In Case of Difficulty Resetting Your Telephone's Programming Electrostatic or power surge (e.g., from lightning) may cause the phone to lock up. There are two ways to reset this phone. 1. Basic reset • Disconnect the telephone line cord from the phone. • Disconnect the AC adapter from the phone. • Press the ▼ button or the ▲ button two times. Wait for 10 seconds; • Reconnect the telephone line cord and the AC adapter to the phone. • Follow the installation procedures to select
Summary of the content on the page No. 19
Troubleshooting If your product does not work properly, try the following suggestions before seeking repair assistance: • Check all line cord connections at the wall jack and at the telephone. • "CALLER Identification" is a subscription service. Non-subscribers of this service cannot receive CALLER Identification information. Make sure that the telephone company has activated your service. • The telephone receives call information between the first and second ring. If the caller h
Summary of the content on the page No. 20
What We Ask You To Do: You must prepay all shipping and handling costs. We suggest you retain your original packing material in the event you need to ship your product. When sending your product for repair service, include your name, address, telephone number with area code, proof of date of purchase, prepaid shipping and handling costs, and a description of the problem. Send all of this to: ClearSounds USA ClearSounds Canada Attn: Repair Center Attn: Repair Center 8160 S. Madi
