ClearOne comm MAX IP user manual

Summary of the content on the page No. 1

MAX™ IP Conferencing Phone
USER’S GUIDE

Summary of the content on the page No. 2

TECHNICAL SUPPORT TELEPHONE 1.800.283.5936 1.801.974.3760 FAX 1.801.977.0087 EMAIL tech.support@clearone.com MAX IP USER’S GUIDE CLEARONE PART NO. 800-158-301. FEBRUARY 2007 (REV.2.0) U.S. PATENT NO. D499,392 © 2007 ClearOne Communications, Inc. All rights reserved. No part of this document may be reproduced in any form or by any means without written permission from ClearOne Communications. Printed in the United States of America. ClearOne reserves specific privi- leges. Inforfrmation in this d

Summary of the content on the page No. 3

MAX IP USER’S GUIDE UNPACKING AND SETTING UP YOUR MAX IP CONFERENCE PHONE For information on unpacking and setting up your MAX IP conference phone, please refer to the MAX IP Administrator’s Guide. KEYPAD FUNCTIONS Key Function ON / OFF PHONEBOOK EDIT REDIAL PROG. CONFERENCE HOLD CLEAR VOLUME MUTE FIGURE 1 MAX IP keypad functions MAX IP User’s Guide 1

Summary of the content on the page No. 4

LCD DISPLAY FIGURE 2 MAX IP LCD display USING THE MAX IP PHONE The following paragraphs describe how to use your MAX IP phone. TO MAKE A CALL 1. Press the ON/OFF key to activate the phone. You hear a dial tone. (The phone icon and line states appear when the phone is active (see figure 3).) The line states are displayed at the far right of the display as “1” for line 1 and “2” for line 2, with the current line state being represented by the letter “c” for “connected,” “i” for “incoming,” “h” for

Summary of the content on the page No. 5

TO MUTE DURING RINGING 1. Press the star (*) or the MUTE key to mute the ringer for the duration of the ringing. > Note: This only mutes the current ring; the ringer is unmuted for subsequent calls. TO ADJUST RINGER VOLUME 1. While the phone is ringing, press VOLUME UP or VOLUME DOWN. 2. While the phone is inactive, press VOLUME UP or VOLUME DOWN. The ringer melody plays once at the new level. TO ADJUST LOUDSPEAKER VOLUME 1. Press the VOLUME UP key while on a call to increase volume. 2. Press th

Summary of the content on the page No. 6

USING THE PHONE IN A THREE-WAY CALL 1. Press the HOLD key to place both lines on hold. > Note: The LEDs flash red when a call is on hold. Press the HOLD key a second time to take both lines off hold. 2. Press the ON/OFF key to hang up both lines. 3. If either of the other parties hangs up during the three-way call, the remaining party stays connected to the call. TO MAKE AN OUTBOUND CALL WHILE ON ANOTHER CALL 1. Press the HOLD key and then press the ON/OFF key. The first party is put on hold and