Summary of the content on the page No. 1
Quick start guide
CL81109/CL81209/CL81309
DECT 6.0 cordless
telephone with caller ID/
call waiting
Summary of the content on the page No. 2
Installation You must install and charge See pages 4-5 the battery before using the STOP! for easy instructions. telephone. Install the telephone base close to a telephone jack and a power outlet not controlled by a wall switch. The telephone base can be placed on a flat surface or vertically mounted on the wall (read the user’s manual for details). For optimum range and better reception, place the telephone base in a central and open location. If you subscribe to high-speed Internet servi
Summary of the content on the page No. 3
Telephone base installation Install the telephone base as shown below. The telephone base is ready for tabletop use. If you want to change to wall mounting, read the user’s manual for details. . Route the power adapter cord . Plug the small end through the slot. of the power adapter into the power jack on the bottom of the 3. Plug one end of the telephone base. telephone line cord into the telephone jack on the bottom of the telephone base. 7. Raise the antenna. 4. Place the cor
Summary of the content on the page No. 4
Charger installation Install the charger as shown below. Plug the power adapter into an electrical outlet not controlled by a wall switch. IMPORTANT INFORMATION . Use only the power adapter(s) supplied with this product. To order a replacement power adapter, visit our website at www.telephones.att.com, or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. . The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed
Summary of the content on the page No. 5
Battery installation & charging Install the battery as shown on the next page. Once you have installed the battery, the screen indicates the battery status (see table below). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset in the charger when not in use. The battery is fully charged after 6 hours of continuous charging. See the table on the Technical specifications page of the user’s manual for battery operati
Summary of the content on the page No. 6
Battery installation & charging Step 1 Step 2 Plug the battery connector Align the cover flat against securely into the socket the battery compartment, inside the handset battery then slide it upwards until it compartment, matching the clicks into place. color-coded label. Insert the supplied battery with the label THIS SIDE UP facing up as indicated. CHARGE light Step 3 Charge the handset by placing it face up in the telephone base or charger. The CHARGE light is on when charging. IMPOR
Summary of the content on the page No. 7
Quick reference guide - handset CHARGE indicator MENU/SELECT On when the handset is Press to show the menu. charging in the telephone base or charger. While in the menu, press to select an item or save an entry qCID/-VOLUME or setting. Press qCID to show caller ID DIR p/+VOLUME history. Press DIR p to show directory Press to scroll down while in entries. menus. Press to scroll up while in While entering names or menus. numbers, press to move the While entering names or cursor to t
Summary of the content on the page No. 8
Quick reference guide - handset Main menu Main menu > Shows a highlighted DIRECTORY item CALL LOG RINGER VOLUME >DIRECTORY CALL LOG RINGER TONE KEY TONE LCD LANGUAGE SET DATE/TIME CLR VOICEMAIL HOME AREA CODE Menu Using menus Press MENU/SELECT to show the first menu item, DIRECTORY. Press qCID or DIR p to scroll through menu items. Press MENU/SELECT to select or save changes to a highlighted menu item. Press OFF/CLEAR to cancel an operation, back up to the previous menu, or exit the menu
Summary of the content on the page No. 9
Quick reference guide - telephone base IN USE indicator On when the handset is VOICEMAIL indicator in use or when you are Flashes when you have new registering a handset. voicemail. Voicemail service Flashes when another is offered by your local telephone is in use on the telephone company. same line, or when you are deregistering handset(s) from the telephone base. HANDSET LOCATOR Flashes quickly when there Press to make handsets is an incoming call. beep so you can locate them. 8
Summary of the content on the page No. 10
www.telephones.att.com © 009 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 789. Printed in China. Issue 4 AT&T 09/09.
