Network Technologies 17-N-PRIMUX user manual

Summary of the content on the page No. 1

1275 Danner Dr Tel:330-562-7070
R NETWORK

Fax:330-562-1999
TECHNOLOGIES Aurora, OH 44202

www.networktechinc.com
NTI INCORPORATED






®
RACKMUX Series


RACKMUX-V15/17-N-PRIMUX
®
RACKMUX KVM DRAWER WITH PRIMUX
KVM SWITCH VIA CAT5
Quick Start Guide



















(Host Adapter sold separately)


What's in the Box
• NTI RACKMUX-V15/17-N-PRIMUX
• Line cord, country specific
• Terminating Plug (for last Host Adapter in chain)
• CDROM w/ Owner's Ma

Summary of the content on the page No. 2

Hardware Setup 1. Disconnect power from the CPU. Note: The Host Adapter must be connected to the CPU before power is connected to the CPU. Failure to do so may result in damage to the Host Adapter. 2. Plug the Host Adapter into the devices and video ports on the back of the CPU. purple-keyboard green-mouse (Front View) video Rear View of PS/2 CPU devices (Front View) video Rear View of USB CPU Rear View of SUN

Summary of the content on the page No. 3

REAR VIEW OF RACKMUX-V15-N-PRIMUX NETWORK TECHNOLOGIES CAT5 NTI INCORPORATED RS232 1275 Danner Dr Tel:330-562-7070 Aurora, OH 44202 Fax:330-562-1999 www.networktechinc.com IEC Powercord 5. Connect the power cord to the User Station. 6. Press the switch to power-up the RACKMUX. 7. Plug in the power cord(s) and power-up the CPU(s). Daisy-Chained Host Adapters Up to 64 CPUs can be connected in a daisy-chain to a create a segment of CPUs cont

Summary of the content on the page No. 4

Initial Startup Upon startup, the Command Mode screen will be displayed, autologging you in as NEWUSER1 without administrative rights. No password will be necessary. As NEWUSER1 you have full access to all Host Adapters and their connected CPUs. To logout as a user, press and the login screen will appear If you logout and want to log back in as NEWUSER1, either ; A) type at the login prompt and press twice