Summary of the content on the page No. 1
Product Description
Model EIR510-2xx-T
Documentation Number: EIR510-2xx-T_0708m
707 Dayton Road -- P.O. Box 1040 -- Ottawa, IL 61350 USA
Phone (815) 433-5100 -- General Fax (815) 433-5105
Phone (815) 433-5100 -- General Fax (815) 433-5105
Website: www.bb-elec.com
Sales e-mail: orders@bb-elec.com -- Fax (815) 433-5109
Technical Support e-mail: support@bb.elec.com -- Fax (815) 433-5104
European Headquarters
B&B Electronics
Westlink Commercial Park
Summary of the content on the page No. 2
Ten Port Managed Industrial Ethernet Switches User Manual B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Summary of the content on the page No. 3
FCC This Equipment has been tested and found to comply with the limits for a Class-A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is n
Summary of the content on the page No. 4
Content Introduction ................................................................ 1 Features ................................................................... 1 Package Contents .................................................... 3 Hardware Description ................................................ 4 Physical Dimension (W x D x H) .............................. 4 Front Panel ............................................................... 4 Bottom View ..........................
Summary of the content on the page No. 5
X-Ring Application .................................................. 16 Coupling Ring Application ...................................... 17 Dual Homing Application ........................................ 18 Console Management .............................................. 19 Connecting to the Console Port ............................. 19 Login in the Console Interface ............................... 19 CLI Management .....................
Summary of the content on the page No. 6
TFTP – Restore Configuration ............................... 52 TFTP - Backup Configuration ................................. 52 System Event Log – Syslog Configuration ............. 53 System Event Log - SMTP Configuration .............. 54 System Event Log - Event Configuration ............... 55 Fault Relay Alarm ................................................... 56 SNTP Configuration ............................................... 57 IP Security ....................................
Summary of the content on the page No. 7
Rapid Spanning Tree ............................................. 73 RSTP System Configuration............................................. 73 RSTP Port Configuration .................................................. 75 SNMP Configuration .............................................. 76 System Configuration ....................................................... 76 Trap Configuration ........................................................
Summary of the content on the page No. 8
Technical Specification ........................................... 95 B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Summary of the content on the page No. 9
Introduction This managed industrial switch is a cost-effective solution and meets the high reliability requirements demanded by industrial applications. The 8 10/100TX plus 2 100FX managed industrial switch can be easily managed through a Web GUI. The fiber ports extend the connection distance, increasing network elasticity and performance. Features System Interface/Performance RJ-45 ports with Auto MDI/MDI-X Store-and-Forward Switching Architecture Back-plane (Switching
Summary of the content on the page No. 10
Security Port Security : MAC address entries/filter IP Security : IP address security management Login Security: IEEE802.1X/RADIUS IGMP with Query mode for Multi Media Application Case/Installation IP-30 Protection DIN Rail and Panel Mount Design Spanning Tree IEEE802.1d Spanning Tree IEEE802.1w Rapid Spanning Tree X-ring X-ring, Dual Homing, and Couple Ring Topology Redundant backup feature with recovery time below 300ms Bandwidth Control Ingress Packet Fil
Summary of the content on the page No. 11
Package Contents One Managed industrial switch One CD ROM containing a user manual RS-232/RJ-45 cable 2 panel mount plates with 6 screws One DIN-Rail Clip (attached on the switch) If any items are missing, contact B&B Electronics for a replacement. Manual Documentation Number: EIR510-xSFP-T_0708m
Summary of the content on the page No. 12
Hardware Description Physical Dimension (W x D x H) 2.9 x 4.2 x 6.4 in (7.4 x 10.7 x 16.3 cm) Front Panel Front Panel of the industrial switch 4 Manual Documentation Number: EIR510-xSFP-T_0708m B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Summary of the content on the page No. 13
Bottom View Bottom Panel of the industrial switch Manual Documentation Number: EIR510-xSFP-T_0708m 5 B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Summary of the content on the page No. 14
LED Indicators LED Status Meaning Green The switch is powered on PWR Off The switch is powered off Green Power source 1 is available. PWR1 Off Power source 1 is unavailable Green Power source 2 is available. PWR2 Off Power source 2 is unavailable Power or port failure (See alarm Orange setting for operational details) Fault Off Normal Operation The switch is the master of an Green X-Ring group R.M. The switch is not the master of an Off X-Ring group Green Fiber port
Summary of the content on the page No. 15
Ports RJ-45 ports There are 8x 10/100Mbps auto-sensing ports with MDI/MDIX. The switch can connect to another switch or workstation without changing between straight through or crossover cabling. RJ-45 Pin Assignments Pin Number Assignment 1 Tx+ 2 Tx- 3 Rx+ 6 Rx- Straight Through Cable Schematic Cross Over Cable Schematic Manual Documentation Number: EIR510-xSFP-T_0708m 7 B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Bo
Summary of the content on the page No. 16
Fiber Port There are two 100Base-FX ports. The fiber port is SC or ST type connectors in multi mode (2Km) or single mode (30Km). Connect the fiber ports as shown below (Transmit to distant end receive and vice versa). ATTENTION This is a Class 1 Laser/LED product. Do not stare into the Laser/LED Beam. 8 Manual Documentation Number: EIR510-xSFP-T_0708m B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5
Summary of the content on the page No. 17
Cabling Use Category 5 cabling for RJ-45 port connection. The cable between the switch and the network device (switch, hub, workstation, etc.) must be less than 328 feet (100 meters) long. Single-mode fiber ports must use 9/125 um single-mode fiber cable. The cable length can be up to 30 Kilometers. Multi-mode fiber ports must use 50 or 62.5/125 um multi-mode fiber cable. The cable length can be up to 2Kilometers. Manual Documentation Number: EIR510-xSFP-T_0708m
Summary of the content on the page No. 18
Wiring the Power Inputs V- V+ V- V+ 1. Insert the positive and negative wires into the V+ and V- contacts on the terminal block connector. 2. To tighten the wire-clamp screws. [NOTE] Use 12 to 24 AWG wire. 10 Manual Documentation Number: EIR510-xSFP-T_0708m B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland –
Summary of the content on the page No. 19
Wiring the Fault Alarm Contact 1A@24V Insert the wires into the fault alarm contact [NOTE] Use 12 to 24 AWG wire. [NOTE] Relay contacts are normally open. [NOTE] The Relay Alarm also requires software configuration. Refer to the Web Based Management Fault Relay Alarm Section. Manual Documentation Number: EIR510-xSFP-T_0708m 11 B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – w
Summary of the content on the page No. 20
Mounting Installation DIN-Rail Mounting Rear Panel of the switch DIN-Rail 1. Use the screws to attach the DIN-Rail to the switch 12 Manual Documentation Number: EIR510-xSFP-T_0708m B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
