Summary of the content on the page No. 1
Quick Installation Guide
TEG-S1 6g
TEG-S2 4g
1 .0 1
Summary of the content on the page No. 2
Table of Contents English 1 1. Before You Start 1 2. Hardware Installation 2 3. LEDs 3 Technical Specifications 4 Troubleshooting 5 Version 01.12.2011
Summary of the content on the page No. 3
1. Before You Start Package Contents Ÿ TEG-S16g/TEG-S24g Ÿ Multi-Language Quick Installation Guide Ÿ Power Cord (1.8m / 6ft.) Ÿ Rack Mount Kit System Requirements Ÿ Computer with Network adapter installed Ÿ CAT-5e or CAT-6 Network Cable Ÿ The surface must support at least 2.3Kg (5 lbs.) for the Switch Ÿ The power outlet should be within 1.8 meters (6 feet) of the switch Ÿ Make sure that there is proper heat dissipation and adequate ventilation around the Switch Ÿ Do not place heavy objects on
Summary of the content on the page No. 4
2. Hardware Installation 1. Connect the Power Cord to the TEG-S16g/TEG-S24g and then to a power outlet. 2. Connect a CAT-5e or CAT-6 RJ-45 network cable from the computer to an available Ethernet port on the TEG-S16g/TEG-S24g. 3. Move the power switch to the on position. 2
Summary of the content on the page No. 5
3. LEDs Power Green: Power is on Not Illuminated: Power is off 10M/LINK/ACT Green (Solid): Link to another device Green (Blinking): Activity is occurring from the link Not Illuminated: Nothing is detected on the port 100M/1000M Green: Connection for the port is 2000Mbps (Full) Amber: Connection for the port is 100/200Mbps (Half/Full) Not Illuminated: Connection for the port is 10/20Mbps (Half/Full) or nothing is detected on the port 3
Summary of the content on the page No. 6
Technical Specifications Hardware TEG-S16g TEG-S24g IEEE 802.3 10Base-T; IEEE 802.3u 100Base-TX Standards IEEE 802.3ab 1000Base-T; IEEE 802.3x Flow Control Ÿ Ethernet: Cat. 5 up to 100m Network Media Ÿ Fast Ethernet: Cat. 5 and 5e up to 100m Ÿ Gigabit Ethernet: Cat. 5, 5e, 6, up to 100m Ÿ Ethernet: 10Mbps/20Mbps (half/full-duplex) Ÿ Fast Ethernet: 100Mbps/200Mbps (half/full-duplex) Data Rates Ÿ Gigabit Ethernet: 2000Mbps (full-duplex) Protocol / Topology CSMA/CD, Star Power Consumption (max) 7.
Summary of the content on the page No. 7
Troubleshooting 1. After connecting the Switch to a power outlet, the LEDs do not turn on. 1. Check the connection of the power cord to the TEG-S16g/TEG-S24g and the power outlet. 2. Check that the power outlet is receiving power. 2. When I connect a computer to one of the ports on the Switch, the 10M/LINK/ACT LED turns on, but I am not getting Gigabit speeds. 1. Check the LEDs. If the 100M/1000M LED is green, the computer's connection speed is 1000Mbps. If the 100M/1000M LED is amber, th
Summary of the content on the page No. 8
Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. TEG-S16g/TEG-S24g - 3 Years Limited Warranty AC/DC Power Adapter, Cooling Fan and Power Supply carry a 1 year limited warranty If a product does not operate as warranted during the applicable warranty period, TRENDnet shall reserve the right, at its expense, to repair or replace the defective product or part
Summary of the content on the page No. 9
WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMER'S SOLE REMEDY SHALL BE, AT TRENDNET'S OPTION, REPAIR OR REPLACE. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. TRENDNET NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT AN
Summary of the content on the page No. 10
Summary of the content on the page No. 11
Summary of the content on the page No. 12
Copyright ©2011, All Rights Reserved. TRENDnet.
