Summary of the content on the page No. 1
Embedded Web System User Guide
TL-SG3109
9-port Gigabit Managed Switch
TL-SL3428
24+4G Gigabit Managed Switch
TL-SL3452
48+4G Gigabit Managed Switch
Rev: 1.0
Summary of the content on the page No. 2
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK Technologies Co., Ltd. Copyright © 2006 TP-LINK Technologies Co., Ltd
Summary of the content on the page No. 3
TABLE OF CONTENTS Preface .............................................................................................................. 1 Guide Overview ................................................................................................................................1 Intended Audience ...........................................................................................................................2 Section 1. Getting Started ............................................
Summary of the content on the page No. 4
4.3 Viewing Flash Logs ............................................................................................................... 18 4.4 Defining System Log Servers ............................................................................................... 19 Section 5. Configuring Device Security .................................................... 21 5.1 Configuring Management Security ...................................................................................... 21 5.1
Summary of the content on the page No. 5
Section 7. Configuring Interfaces ............................................................... 45 7.1 Configuring Ports .................................................................................................................. 45 7.2 Configuring LAGs .................................................................................................................. 47 7.2.1 Defining LAG Members ......................................................................................
Summary of the content on the page No. 6
11.3.1 Defining SNMP Global Parameters ................................................................................ 71 11.3.2 Defining SNMP Views ...................................................................................................... 71 11.3.3 Defining SNMP Group Profiles ........................................................................................ 72 11.3.4 Defining SNMP Group Members .........................................................................
Summary of the content on the page No. 7
13.4 Copying System Files ......................................................................................................... 88 Section 14. Performing Device Diagnostics ............................................. 90 14.1 Configuring Port Mirroring .................................................................................................. 90 14.2 Viewing Integrated Cable Tests .......................................................................................... 91 14.
Summary of the content on the page No. 8
Preface The Embedded Web System (EWS) is a network management system. The TP-Link Embedded Web Interface configures, monitors, and troubleshoots network devices from a remote web browser. The TP-Link Embedded Web Interface web pages are easy-to-use and easy-to-navigate. In addition, the TP-Link Embedded Web Inter-face provides real time graphs and RMON statistics to help system administrators monitor network performance. This preface provides an overview to the TP-Link Embedded Interface Use
Summary of the content on the page No. 9
Section 14. Performing Device Diagnostics — Provides information about port mirroring configuration, copper and fiber cables testing, and viewing device health information. Section 15. Viewing Statistics — Provides information about viewing device statistics, including Remote Monitoring On Network (RMON) statistics, and device history events. Intended Audience This guide is intended for network administrators familiar with IT concepts and network terminology.
Summary of the content on the page No. 10
Section 1. Getting Started This section provides an introduction to the user interface, and includes the following topics: Configuring the device to use TP-Link Embedded Web Interface Starting the TP-Link Embedded Web Interface Understanding the TP-Link Embedded Web Interface Using Screen and Table Options Resetting the Device Logging Off from the Device 1.1 Configuring the device to use TP-Link Embedded Web Interface When the device is received, the Embedded Web Interface can no
Summary of the content on the page No. 11
To access the TP-Link user interface: 1. Open an Internet browser. 2. Ensure that pop-up blockers are disabled. If pop-up blockers are enable, modify, add, and device information messages may not open. 3. Enter the device IP address in the address bar and press Enter. The Login Page opens: Figure 1: Login Page 4. Enter your user name and password. Note: Passwo
Summary of the content on the page No. 12
This section provides the following additional information: Device Representation — Provides an explanation of the TP-Link user interface buttons, including both management buttons and task icons. Using the TP-Link Embedded Web Interface Management Buttons — Provides instructions for adding, modifying, and deleting configuration parameters. 1.3.1 Device Representation The TP-Link Embedded Web Interface Home Page contains a graphical representation of the device. This representation var
Summary of the content on the page No. 13
1.4 Using Screen and Table Options The TP-Link Embedded Web Interface contains screens and tables for configuring devices. This section contains the following topics: Adding Configuration Information Modifying Configuration Information Deleting Configuration Information 1.4.1 Adding Configuration Information User-defined information can be added to specific TP-Link Web Interface pages, by opening a new Add page. To add information to tables or TP-Link Web Interface pages:
Summary of the content on the page No. 14
Figure 6: IP Addressing Page 2. Select the Remove checkbox in the row of the item to delete. 3. Click . The information is deleted, and the device is updated. 1.6 Resetting the Device The Reset page enables resetting the device from a remote location. Note: To prevent the current configuration from being lost, save all changes from the running configuration file to the startup configuration file before resetting the device.
Summary of the content on the page No. 15
Section 2. Defining Device Information This section contains information for viewing and setting general system information. The System Description Page contains parameters for configuring general device information, including the system name, location, and contact, the system MAC Address, System Object ID, System Up Time, System IP and MAC addresses, and both software and hardware versions. To view and define the system description: 1. Click System Info > General > Description. The Syst
Summary of the content on the page No. 16
Section 3. Setting the System Time This section provides information for configuring system time parameters, including: Configuring Daylight Savings Time Configuring SNTP 3.1 Configuring Daylight Savings Time The System Information Time Page contains fields for defining system time parameters for both the local hardware clock and the external SNTP clock. If the system time is kept using an external SNTP clock, and the external SNTP clock fails, the system time reverts to the local hardw
Summary of the content on the page No. 17
Latvia — From the last weekend of March until the last weekend of October. Lebanon — From the last weekend of March until the last weekend of October. Lithuania — From the last weekend of March until the last weekend of October. Luxembourg — From the last weekend of March until the last weekend of October. Macedonia — From the last weekend of March until the last weekend of October. Mexico — From the first Sunday in April at 02:00 to the last Sunday in October at 02:00. Moldova —
Summary of the content on the page No. 18
The DST can be set according to unique start and end dates for a particular year or as a recurring period for any year. For a specific setting in a particular year, complete the fields in the Daylight Savings area; for a recurring setting, complete the fields in the Recurring area. Daylight Savings: – USA — The device switches to DST at 2:00 a.m. on the first Sunday of April, and reverts to standard time at 2:00 a.m. on the last Sunday of October. – European — The device switches to DST at 1
Summary of the content on the page No. 19
4. Click . The DST settings are saved, and the device is updated. 3.2 Configuring SNTP This section contains the following topics: SNTP Overview Defining SNTP Global Settings Configuring SNTP Authentication Defining SNTP Servers Defining SNTP Interface Settings 3.2.1 SNTP Overview The device supports the Simple Network Time Protocol (SNTP). SNTP assures accurate network device clock time synchronization up to the millisecond. Time synchronization is performed by a network SNTP
Summary of the content on the page No. 20
server, the SNTP client listens for the response. The SNTP client neither sends time information requests nor receives responses from the Broadcast server. Message Digest 5 (MD5) Authentication safeguards device synchronization paths to SNTP servers. MD5 is an algorithm that produces a 128-bit hash. MD5 is a variation of MD4, and increases MD4 security. MD5 verifies the integrity of the communication, authenticates the origin of the communication. 3.2.2 Defining SNTP Global Settings The SNT
