Summary of the content on the page No. 1
NCU103
Summary of the content on the page No. 2
DEAR CUSTOMER: Thank you for purchasing this car audio product. Selecting fine audio equipment such as the unit you have just purchased is only the start of your musical enjoyment. Now it is time to consider how you can maximize the fun and excitement your equipment offers. We hope you get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blare or distortion, and, more important, without affecting your sensitive
Summary of the content on the page No. 3
LOCATION AND FUNCTION OF CONTROLS SPECIFICATION GENERAL Supply Voltage DC 14.4 V. Negative Ground Current Consumption Max.15A MAX Power Output 40Watts X 4 Number of channels 2 STEREO channels. Unit Dimensions 178[W] X 164[D] X 50[H] mm. FM SECTION Frequency range 87.5MHz -107.9MHz Effective sensitivity 3uV. I.F Frequency 10.
Summary of the content on the page No. 4
TROUBLE SHOOTING (2) When pressed longer 2 seconds, it is activated as cyclical mode of following functions for user s selection. -> BEEP (2nd/ALL/OFF) ->SEEK1/ 2 -> DSP(OFF/POP/ROCK/CLASSIC/FLAT) -> Before using the check list please make all the connections first. SUBW ON/OFF-> VOL LAST/VOL ADJ -> ESP 40/10 seconds mode. If you still have questions after going through the checklist, please consult After selecting the desired mode, rotate the VOL knob to sele
Summary of the content on the page No. 5
6. AUTO-STORAGE/PRESET MEMORY SCAN BUTTON 1) In radio mode, press it to perform all stations memory for 5 seconds each time, while memory PRECAUTION OF DISC PLAY: digital and frequency will flash on LCD. If the button is pressed for more than 2 seconds, it will seek station on current band, then write to the preset memories. When the auto-storage Cleaning the CD: operation is completed, it will automatically perform for 5 seconds each time. After finishing 1 loop of me
Summary of the content on the page No. 6
10. POWER BUTTON PRECAUTIONS AND MAINTENANCE Press any button except the EJECT and RELEASE button to turn on the unit. 1. If the car interior is extremely hot, as after being parked in the sun, do It also can turn on the unit to insert disc, MMC/SD card or USB bar into their compartment or not use the player until the car has been driven for a while to cool off socket. Press PWR button hold for more than 0.5 seconds to turn off the unit. the interior. 2. The protecti
Summary of the content on the page No. 7
F).In MMC/SD, USB or MP3/WMA disc mode, M6 and M5 is assigned as 10 TRACK up/down when normal play. 14. MODE BUTTON Press it to select RADIO, DISC, CARD(after inserting MMC/SD card), USB(after inserting USB bar) and auxiliary input playing mode. 15. AUXILIARY INPUT JACK You can connect any external audio device to the auxiliary input jack. Then press the mode button to select auxiliary input playing mode, use the volume control to adjust volume. 16&1
Summary of the content on the page No. 8
23. RESET BUTTON MAINTENANCE OF REMOTE CONTROLLER Before operating the unit for the first time, or after replacing the car battery or changing the An insulation tag was installed in your remote by the manufacturer to prevent the connections. You must reset the unit. battery from draining. Removing the tag from the remote before using. After removing the faceplate, press this button with a cuspidal object. This operation will erase the clock setting and some stored conten
