Summary of the content on the page No. 1
™
MiniView Micro USB
2-Port KVM Switch with Built-in KVM Cables
Installation Manual (GCS52U)
®
Summary of the content on the page No. 2
©2003 IOGEAR. All Rights Reserved. PKG-M0073 IOGEAR, the IOGEAR logo, MiniView, VSE are trademarks or registered trademarks of IOGEAR, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. IBM is a registered trademark of International Business Machines, Inc. Macintosh, G3/G4 and iMac are registered trademarks of Apple Computer, Inc. IOGEAR makes no warranty of any kind with regards to the information presented in this document. All information furnished here is fo
Summary of the content on the page No. 3
Thank you for purchasing one of the most feature-rich keyboard, video, and mouse switches on the market. IOGEAR’s MiniView™ Micro switches are first-rate connectivity accessories designed to help reduce the frustration of managing multiple computer systems. With the MiniView™ Micro by IOGEAR, you can access two computers from a single console(keyboard, mouse and monitor). MiniView™ Micro allows you to change ports easily by entering Hot Key combinations from the keyboard. Setup is fast and e
Summary of the content on the page No. 4
Table of Contents Package Contents ○○○○○○○○○○○○○○○○○○○ ○ ○ 02 ○○○○○○○○○○○○○○○○○○○ ○○○○○○ Overview 03 ○○○○○○○○○ ○○○○○○○○○○○○○○○○ Features 04 ○○○○○○○○○○○○○○○○○○○ ○○○○ Requirements 05 ○ ○ ○ ○○○○○○○○○○○○○○○○○○○○○ Introduction 06 ○○○○○○○○○○○○○○○ ○○○○○○○○○ Installation 07 ○○○○○○○○○○○○○○○○○ ○○○○○○○○ Operation 10 ○○○○○○○○○○○○○○○○○○○○ ○ ○ Appendix (HotKey) 13 ○○○○○○○ ○○○○○○○○○○○○○○○○○ Specification 14 ○○○○○○○○○○○○○○○○○○○○ ○ ○ Troubleshooting 16 ○○○○○○○ ○○○○○○○○○○○○○○○○○ Tech Support 18 ○○○○○○○○ ○○○○○○ Ra
Summary of the content on the page No. 5
Package Contents This package contains: TM 1 MiniView Micro USB 2-port KVM switch 1 User Manual 1 Quick Start Guide 1 Warranty Registration Card If any items are damaged or missing, please contact your dealer. 2
Summary of the content on the page No. 6
Overview The MiniView™ Micro USB (GCS52U) KVM switch allows access to two USB computers from a single console (keyboard, monitor, and mouse). This cost-effective way to access two computers, without extra hardware, is highly efficient and easy to use. By allowing a single console to manage both computers, the MiniView™ Micro eliminates the expense of purchasing extra keyboards, monitors, mice, and the MiniView™ Micro eliminates the extra space they would take up. The MiniView™ Micro USB KVM is
Summary of the content on the page No. 7
Features - Use one keyboard, monitor and mouse to control two computers - Very compact KVM switch with molded cables for computer connections - Supports Microsoft IntelliMouse and the scrolling wheel on most mice - Easy to install – No Software Required ! - Easy to operate – PC selection via convenient Hot Keys - AutoScan function to monitor computer operation - LED display for easy status monitoring - Caps Lock, Num Lock, and Scroll Lock states are saved and restored when switching - Hot plug
Summary of the content on the page No. 8
Requirements Computers with a PS/2 mouse and keyboard connection, VGA connection, and an available USB port. PS/2 connection USB port VGA connection 5
Summary of the content on the page No. 9
Introduction 1. VGA port for the console monitor 2. PS/2 port for the console keyboard 5 3. PS/2 port for the console mouse 4. VGA connector to the computer 4 5. USB connector to the computer 6. Port selected LEDs 6 5 4 123 6
Summary of the content on the page No. 10
Installation Step. 1 Before you begin, please turn off the computers you are going to connect to the MiniView™ Micro USB KVM. If you have never installed a USB mouse and Keyboard on your computer before you may need to leave your PS/2 mouse and keyboard attached during the first boot-up after installing the GCS52U. After you have installed the KVM shutdown your computer and move the PS/2 mouse and keyboard to the GCS52U console port. You have now installed the unit. 1. Connect your monitor VGA c
Summary of the content on the page No. 11
34 Installation Step. 2 4.Connect the VGA cable (item# 4) that is built into the KVM cable of your MiniView™ Micro to the VGA port on your computer. 5.Connect the USB cable (item# 5) that is built into the KVM cable of your MiniView™ Micro to the USB port on your computer. 5 4 8
Summary of the content on the page No. 12
Installation Step. 3 Repeat Step 2 for your second computer. Step. 4 Turn the power of your computers on. To switch between computers, tap the Scroll Lock key twice. 9
Summary of the content on the page No. 13
Operation Operations MiniView™ Micro allows you to access the computers through Hot Key combinations from the keyboard. 1. Selecting computers You can toggle between the two computers by pressing and releasing the Scroll Lock key twice: [Scroll Lock]+[Scroll Lock]. 2. AutoScan Mode The MiniView™ Micro USB KVM offers AutoScan feature and allows you to monitor the activity of the connected computers without taking the trouble of switching yourself. 10
Summary of the content on the page No. 14
Operation Operations con’d To initiate the AutoScan mode, press and release the left Shift key, then press and release the right Shift key: [Left Shift] + [Right Shift]. NOTE: The interval between these two keys should be no more than 0.5 seconds. Once the scanning begins, it continues until you press the [Space Bar] to exit AutoScan Mode. The port that was active at the time the scanning stopped would remain active. Note: While AutoScan Mode is in effect, none of the keyboard keys except [Space
Summary of the content on the page No. 15
Operation Operations con’d You can customize the scan interval time with the following Hot Key combination: [Left Shift] + [Right Shift] + [S] + [n]. [n] represents a number from 1 to 4 which sets the desired scan interval as shown in the table below: n Scan Interval 1 3 seconds 2 5 seconds 3 10 seconds 4 20 seconds 12
Summary of the content on the page No. 16
Appendix LED Display Activity Function Off Port is not selected On (Steady) Port is connected to an active computer Port is connected to an active computer, and is being accessed in Flashing AutoScan Mode 13
Summary of the content on the page No. 17
Specification 14
Summary of the content on the page No. 18
○○○○○○○○○ ○○○○○○○○○ Specification Con’d 15
Summary of the content on the page No. 19
Troubleshooting 16
Summary of the content on the page No. 20
Troubleshooting Con’d 17
